Hi Marco, On Tue, Aug 13, 2019 at 11:10:30AM +0200, Marco Felsch wrote: > On 19-05-16 21:07, Laurent Pinchart wrote: > > On Mon, Apr 15, 2019 at 02:44:12PM +0200, Marco Felsch wrote: > > > The tvp5150 accepts NTSC(M,J,4.43), PAL (B,D,G,H,I,M,N) and SECAM video > > > data and is able to auto-detect the input signal. The auto-detection > > > does not work if the connector does not receive an input signal and the > > > tvp5150 might not be configured correctly. This misconfiguration leads > > > into wrong decoded video streams if the tvp5150 gets powered on before > > > the video signal is present. > > > > > > Limit the supported tv norms according to the actual selected connector > > > to avoid a misconfiguration. > > > > This seems a bit of a hack to me. In particular, on what grounds would > > you specify a particular configuration in DT ? Also, this issue affects > > non-DT systems, and should be solved globally. > > Why is this a hack? Imagine a hardware which supports PAL signals only. > Then it should be forbidden for the user space to configure it to SECAM > or any NTSC. Since the hardware makes the limitation it should be > abstracted on DT level.
What part of the hardware would be the limiting factor here ? Clearly not the TVP5150 as it supports all TV norms, and also not the connector, as the connector hardware doesn't care about TV norms. > > > Signed-off-by: Marco Felsch <m.fel...@pengutronix.de> > > > --- > > > [1] https://patchwork.kernel.org/cover/10794703/ > > > > > > v5: > > > - probe() initialize supported tv-norms according the given connectors > > > if they are available. > > > - check if media-controller is used. Don't limit the norm if it isn't > > > used. > > > - add more logic to be smarter during connector changing so it is > > > intuitiver for the user space. > > > > > > v2-v4: > > > - nothing since the patch was squashed from series [1] into this > > > series. > > > > > > drivers/media/i2c/tvp5150.c | 69 +++++++++++++++++++++++++++++++++++-- > > > 1 file changed, 67 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c > > > index cd54715eb641..c0ee08546643 100644 > > > --- a/drivers/media/i2c/tvp5150.c > > > +++ b/drivers/media/i2c/tvp5150.c > > > @@ -32,6 +32,13 @@ > > > #define TVP5150_MBUS_FMT MEDIA_BUS_FMT_UYVY8_2X8 > > > #define TVP5150_FIELD V4L2_FIELD_ALTERNATE > > > #define TVP5150_COLORSPACE V4L2_COLORSPACE_SMPTE170M > > > +#define TVP5150_STD_MASK (V4L2_STD_NTSC | \ > > > + V4L2_STD_NTSC_443 | \ > > > + V4L2_STD_PAL | \ > > > + V4L2_STD_PAL_M | \ > > > + V4L2_STD_PAL_N | \ > > > + V4L2_STD_PAL_Nc | \ > > > + V4L2_STD_SECAM) > > > > > > MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video > > > decoder driver"); > > > MODULE_AUTHOR("Mauro Carvalho Chehab"); > > > @@ -66,6 +73,7 @@ struct tvp5150 { > > > /* media-ctl properties */ > > > struct media_pad pads[TVP5150_NUM_PADS]; > > > struct tvp5150_connector *connectors; > > > + struct tvp5150_connector *cur_connector; > > > int connectors_num; > > > > > > struct v4l2_ctrl_handler hdl; > > > @@ -785,17 +793,28 @@ static int tvp5150_g_std(struct v4l2_subdev *sd, > > > v4l2_std_id *std) > > > static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std) > > > { > > > struct tvp5150 *decoder = to_tvp5150(sd); > > > + struct tvp5150_connector *cur_con = decoder->cur_connector; > > > + v4l2_std_id supported_norms = cur_con ? > > > + cur_con->base.connector.analog.supported_tvnorms : V4L2_STD_ALL; > > > > > > if (decoder->norm == std) > > > return 0; > > > > > > + /* > > > + * check if requested std or group of std's is/are supported by the > > > + * connector > > > + */ > > > + if ((supported_norms & std) == 0) > > > + return -EINVAL; > > > + > > > /* Change cropping height limits */ > > > if (std & V4L2_STD_525_60) > > > decoder->rect.height = TVP5150_V_MAX_525_60; > > > else > > > decoder->rect.height = TVP5150_V_MAX_OTHERS; > > > > > > - decoder->norm = std; > > > + /* set only the specific supported std in case of group of std's */ > > > + decoder->norm = supported_norms & std; > > > > > > return tvp5150_set_std(sd, std); > > > } > > > @@ -1347,6 +1366,8 @@ static int tvp5150_link_setup(struct media_entity > > > *entity, > > > TVP5150_BLACK_SCREEN, 0); > > > > > > if (flags & MEDIA_LNK_FL_ENABLED) { > > > + u32 new_norm; > > > + > > > /* > > > * S-Video connector is conneted to both ports AIP1A and AIP1B. > > > * Both links must be enabled in one-shot regardless which link > > > @@ -1358,6 +1379,26 @@ static int tvp5150_link_setup(struct media_entity > > > *entity, > > > if (err) > > > return err; > > > } > > > + > > > + /* Update the current connector */ > > > + decoder->cur_connector = > > > + container_of(remote, struct tvp5150_connector, pad); > > > + > > > + /* > > > + * Do nothing if the new connector supports the same tv-norms as > > > + * the old one. > > > + */ > > > + new_norm = decoder->norm & > > > + > > > decoder->cur_connector->base.connector.analog.supported_tvnorms; > > > + if (decoder->norm == new_norm) > > > + return 0; > > > + > > > + /* > > > + * Fallback to the new connector tv-norms if we can't find any > > > + * common between the current tv-norm and the new one. > > > + */ > > > + tvp5150_s_std(sd, new_norm ? new_norm : > > > + > > > decoder->cur_connector->base.connector.analog.supported_tvnorms); > > > } > > > > > > return 0; > > > @@ -1576,6 +1617,9 @@ static int tvp5150_registered(struct v4l2_subdev > > > *sd) > > > TVP5150_COMPOSITE1; > > > > > > tvp5150_selmux(sd); > > > + decoder->cur_connector = &decoder->connectors[i]; > > > + tvp5150_s_std(sd, > > > + > > > decoder->connectors[i].base.connector.analog.supported_tvnorms); > > > } > > > } > > > #endif > > > @@ -1903,6 +1947,11 @@ static int tvp5150_parse_dt(struct tvp5150 > > > *decoder, struct device_node *np) > > > ret = -EINVAL; > > > goto err; > > > } > > > + if (!(c.connector.analog.supported_tvnorms & > > > + TVP5150_STD_MASK)) > > > + dev_warn(dev, > > > + "Unsupported tv-norm on connector > > > %s.\n", > > > + c.label); > > > in++; > > > break; > > > case TVP5150_PAD_VID_OUT: > > > @@ -2011,7 +2060,23 @@ static int tvp5150_probe(struct i2c_client *c, > > > if (res < 0) > > > goto err_cleanup_dt; > > > > > > - core->norm = V4L2_STD_ALL; /* Default is autodetect */ > > > + /* > > > + * Iterate over all available connectors in case they are supported and > > > + * successfully parsed. Fallback to default autodetect in case they > > > + * aren't supported. > > > + */ > > > + if (core->connectors) { > > > + struct v4l2_fwnode_connector *con; > > > + int i; > > > + > > > + for (i = 0; i < core->connectors_num; i++) { > > > + con = &core->connectors[i].base; > > > + core->norm |= con->connector.analog.supported_tvnorms; > > > + } > > > + } else { > > > + core->norm = V4L2_STD_ALL; > > > + } > > > + > > > core->detected_norm = V4L2_STD_UNKNOWN; > > > core->input = TVP5150_COMPOSITE1; > > > core->enable = true; -- Regards, Laurent Pinchart