Document the optional binding to limit the possible sdtv standards on the
input connectors.

Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
Reviewed-by: Rob Herring <r...@kernel.org>
---
v8:
- adapt to new sdtv-standards
- adapt commit message
- fix missing include within example code

 .../devicetree/bindings/media/i2c/tvp5150.txt          | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt 
b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
index cc98b38c7e73..f876b79c335f 100644
--- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
+++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
@@ -49,13 +49,22 @@ Required Endpoint Properties for parallel synchronization 
on output port:
 Note: Do not specify any of these properties if you want to use the embedded
       BT.656 synchronization.
 
+Optional Connector Properties:
+==============================
+
+- sdtv-standards: Set the possible signals to which the hardware tries to lock
+                  instead of using the autodetection mechnism. Please look at
+                  [1] for more information.
+
 [1] 
Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt.
 
 Example - three input sources:
+#include <dt-bindings/display/sdtv-standards.h>
 
 comp_connector_0 {
        compatible = "composite-video-connector";
        label = "Composite0";
+       sdtv-standards = <TVNORM_PAL_M>; /* limit to pal-m signals */
 
        port {
                composite0_to_tvp5150: endpoint {
@@ -67,6 +76,7 @@ comp_connector_0 {
 comp_connector_1 {
        compatible = "composite-video-connector";
        label = "Composite1";
+       sdtv-standards = <TVNORM_NTSC_M>; /* limit to ntsc-m signals */
 
        port {
                composite1_to_tvp5150: endpoint {
-- 
2.20.1

Reply via email to