On 10/1/19 11:15 AM, Breno Leitao wrote:
> Hi Hans,
>
> On 01/10/2019 09:39, Hans Verkuil wrote:
>> On 10/1/19 10:10 AM, Breno Leitao wrote:
>>> There are some weird monitors that returns invalid data, as zeroed
>>> Horizontal/Vertical Active/Blanking.
>>
>> Do you have an EDID that does this? I'd like to add it to the collection
>> of EDIDs in edid-decode.
>
> Yes, This is an example. Is this what you want?
>
> # cat /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1/edid |
> hexdump
> 0000000 ff00 ffff ffff 00ff 8f15 4600 72f0 0000
> 0000010 171e 0301 6680 7839 602a a19d 4954 269b
> 0000020 470f 234a 0008 c081 4081 8081 0095 00b3
> 0000030 c0d1 c08b 0101 3a02 1880 3871 402d 2c58
> 0000040 0045 3dfa 0032 1e00 2166 aa56 0051 301e
> 0000050 8f46 0033 3dfa 0032 1e00 0000 fd00 3000
> 0000060 1f3e 0f50 0a00 2020 2020 2020 0000 fe00
> 0000070 3100 3242 3343 3050 3430 3035 200a a101
> 0000080 0302 401b 1647 0431 0119 1803 0923 0707
> 0000090 0183 0000 0366 000c 0020 0180 001d 2e7c
> 00000a0 a090 1a60 401e 2030 0036 0ba2 0032 1a00
> 00000b0 0000 f700 0a00 ca00 60e0 0000 0000 0000
> 00000c0 0000 0000 fc00 4500 4f4c 4520 3454 3036
> 00000d0 4c30 2020 0000 0000 0000 0000 0000 0000
> 00000e0 0000 0000 0000 0000 0000 0000 0000 0000
> 00000f0 0000 0000 0000 0000 0000 0000 0000 c100
Can you just mail me the raw output?
cat /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1/edid >edid.bin
hexdump messes things up, swapping lsb and msb :-)
Regards,
Hans
> 0000100
>
>>
>> Some more nitpicks below:
>>
>>>
>>> This causes edid-decode to crash with a division by zero exception. This
>>> simple
>>> patch avoids so, checking for the divisor before proceeding.
>>>
>>> Signed-off-by: Breno Leitao <lei...@debian.org>
>>> ---
>>> edid-decode.c | 10 ++++++++++
>>> 1 file changed, 10 insertions(+)
>>>
>>> diff --git a/edid-decode.c b/edid-decode.c
>>> index 7442f8a..b932179 100644
>>> --- a/edid-decode.c
>>> +++ b/edid-decode.c
>>> @@ -1022,6 +1022,16 @@ static int detailed_block(const unsigned char *x,
>>> int in_extension)
>>> break;
>>> }
>>>
>>> + if (!ha || !hbl || !va || !vbl) {
>>> + printf("Invalid Detailing Timings:\n"
>>
>> Detailing -> Detailed
>>
>>> + "Horizontal Active %4d\n"
>>> + "Horizontal Blanking %4d\n"
>>
>> This can be a bit more concise:
>>
>> "Horizontal Active/Blanking: %d/%d\n"
>>
>>> + "Vertical Active %4d\n"
>>> + "Vertical Blanking %4d\n",
>>
>> Ditto.
>
> Ok, let me change it and send a v3.
>
