Hi Steve, On Wed, Oct 16, 2019 at 4:11 PM Steve Longerbeam <slongerb...@gmail.com> wrote:
> FIM is available on the above nodes (/dev/video0 and /dev/video3), after > enabling links to them. So please try: > > # media-ctl -l "'ipu1_csi0':2 -> 'ipu1_csi0 capture':0[1]" > # v4l2-ctl -d0 --list-ctrls > > # media-ctl -l "'ipu1_csi1':2 -> 'ipu1_csi1 capture':0[1]" > # v4l2-ctl -d3 --list-ctrls Thanks. This makes the FIM controls to appear. However, if I run the following configuration so that I can get Gstreamer pipeline to run (gst-launch-1.0 v4l2src device=/dev/video2 ! kmssink) then FIM does not appear. # media-ctl -l "'adv7180 4-0021':0 -> 'ipu1_csi0_mux':4[1]" media-ctl -l "'ipu1_csi0_mux':5 -> 'ipu1_csi0':0[1]"; media-ctl -l "'ipu1_csi0':1 -> 'ipu1_vdic':0[1]" media-ctl -l "'ipu1_vdic':2 -> 'ipu1_ic_prp':0[1]" media-ctl -l "'ipu1_ic_prp':2 -> 'ipu1_ic_prpvf':0[1]" media-ctl -l "'ipu1_ic_prpvf':1 -> 'ipu1_ic_prpvf capture':0[1]" But I think this behavior is expected according to your previous explanation: "If /dev/video2 is the "ipu1_ic_prpvf capture" node, it's because FIM is not yet available on those nodes. The FIM is only available on the "ipuX_csiY capture" nodes. It's on my plate to fix that." Thanks for your patience in clarifying this. Cheers
