On 10/17/19 2:15 PM, Antti Palosaari wrote:
If the receiver has onboard firmware, isn't that the right one? Then the
On 10/17/19 12:08 PM, Sean Young wrote:
I have a Logilink VG0022A device which is an af9035.c type device (with
ITE 9xxx frontned). The probe of the si2146 tuner fails and returns
Now I would like to work on fixing this. Mauro suggested the firmware
be incorrect. Any tips on extracting the firmware? I can try and dump
usb traffic from Windows and see what firmware is being used there.
you extract the firmware?
driver has no need to load one. Or am I missing the point here?
Any other suggestions for this device? You might be able to save me a
of time since you have experience with these types of devices, I do not.
Extracting firmware is done almost always by following steps:
1) take sniffs from the some bus (usb/i2c)
2) identify firmware download section, detect it starting point and
ending point ~few first and last bytes
3) find that firmware binary located inside of binary driver
* grep, hexeditor, etc
* example LANG=C grep -obUaP "\x08\x05\x00" driver.sys
4) use dd command to copy firmware blob from binary driver to separate
file (you need to know firmware location and length inside binary)
It is also possible to dump firmware to file from bus sniffs too, but
it requires writing some simple script. Dumping it from the binary
driver is usually still most easiest way.
At some point I downloaded bunch of drivers to find out multiple
firmware versions for si2168 and made simple script to ease things.
Script is attached.
After all, I suspect root of issue may be still be buggy i2c...