Hi,

Am Dienstag, den 30.03.2010, 16:02 +1000 schrieb Dmitri Belimov:
> Hi
> 
> The hybrid tuner FMD1216MEX_MK3 after cold start has disabled IF.
> This tuner has internal I2C switch. This switch switch I2C bus between DVB-T 
> and IF part.
> Default state is DVB-T. When module saa7134 is load it can't find IF tda9887 
> and disable
> analog TV mode.
> 
> This patch set internal I2C switch of the tuner to IF by send special value 
> to the tuner as for receive
> analog TV from low band. It can be usefule for other cards.
> 
> I didn't set configure a tuner by a tuner model because this tuner can has 
> different I2C address.
> May be we can do it later after discuss for more robust support a tuners.

just as a reminder. It is the same for the FMD1216ME hybrid MK3.
After every boot, analog mode fails with missing tda9887.

Currently, after tuner modules are not independent anymore, one has to
reload the saa7134 driver once.

Relevant code in tuner.core.c.

        case TUNER_PHILIPS_FMD1216ME_MK3:
                buffer[0] = 0x0b;
                buffer[1] = 0xdc;
                buffer[2] = 0x9c;
                buffer[3] = 0x60;
                i2c_master_send(c, buffer, 4);
                mdelay(1);
                buffer[2] = 0x86;
                buffer[3] = 0x54;
                i2c_master_send(c, buffer, 4);
                if (!dvb_attach(simple_tuner_attach, &t->fe,
                                t->i2c->adapter, t->i2c->addr, t->type))
                        goto attach_failed;
                break;

Hermann

> diff -r 1ef0265456c8 linux/drivers/media/video/saa7134/saa7134-cards.c
> --- a/linux/drivers/media/video/saa7134/saa7134-cards.c       Fri Mar 26 
> 00:54:18 2010 -0300
> +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c       Sun Mar 28 
> 08:21:10 2010 -0400
> @@ -7450,6 +7450,21 @@
>               }
>               break;
>       }
> +     case SAA7134_BOARD_BEHOLD_H6:
> +     {
> +             u8 data[] = { 0x09, 0x9f, 0x86, 0x11};
> +             struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = data,
> +                                                     .len = sizeof(data)};
> +
> +             /* The tuner TUNER_PHILIPS_FMD1216MEX_MK3 after hardware    */
> +             /* start has disabled IF and enabled DVB-T. When saa7134    */
> +             /* scan I2C devices it not detect IF tda9887 and can`t      */
> +             /* watch TV without software reboot. For solve this problem */
> +             /* switch the tuner to analog TV mode manually.             */
> +             if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
> +                             printk(KERN_WARNING
> +                                   "%s: Unable to enable IF of the tuner.\n",
> +                                    dev->name);
> +             break;
> +     }
>       } /* switch() */
>  
>       /* initialize tuner */
> 
> Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <[email protected]>
> 
> With my best regards, Dmitry.

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to