istva...@mailbox.hu wrote: > This patch adds support for V4L2_CID_SHARPNESS by changing the luma peak > filter and notch filter. It can be set in the range 0 to 9, with 0 being > the original and default mode. > One minor problem is that other code that sets the registers being used > (for example when switching TV channels) could reset the control to the > default. This could be avoided by making changes so that the bits used > to implement this control are not overwritten. > > Signed-off-by: Istvan Varga <istv...@users.sourceforge.net> > > + case V4L2_CID_SHARPNESS: > + /* use 4xFsc or square pixel notch filter */ > + cx_andor(MO_HTOTAL, 0x1800, (ctl->value & 1) << 11); > + /* 0b000, 0b100, 0b101, 0b110, or 0b111 */ > + value = (ctl->value < 2 ? 0 : (((ctl->value + 6) & 0x0E) << 6)); > + /* needs to be set for both fields */ > + cx_andor(MO_FILTER_EVEN, mask, value); > + break;
You're not adjusting the sharpness. Instead, you're changing the vertical tap filter, and just for the even frames, plus the notch filter. Tricky, and you're probably affecting the sharpness, but on an indirect and non-linear way, as you're adjusting different measures. This doesn't seem right, at least on my eyes. If this is really needed, it would be better to break it into two controls (one for the notch filter and another for the vertical tap filter). Also, the "side effect" is not good: if you're using those bits, your code should assure that no other part of the driver will touch on the used bits, and that the device will be initialized with the default standard. -- Cheers, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
