On Mon, Jun 21, 2010 at 08:15:58AM +0300, Baruch Siach wrote: > This is the soc_camera support developed by Sascha Hauer for the i.MX27. Alan > Carvalho de Assis modified the original driver to get it working on more > recent > kernels. I modified it further to add support for i.MX25. This driver has been > tested on i.MX25 and i.MX27 based platforms. > > Signed-off-by: Baruch Siach <bar...@tkos.co.il> > --- > arch/arm/plat-mxc/include/mach/memory.h | 4 +- > arch/arm/plat-mxc/include/mach/mx2_cam.h | 46 + > drivers/media/video/Kconfig | 13 + > drivers/media/video/Makefile | 1 + > drivers/media/video/mx2_camera.c | 1493 > ++++++++++++++++++++++++++++++ > 5 files changed, 1555 insertions(+), 2 deletions(-) > create mode 100644 arch/arm/plat-mxc/include/mach/mx2_cam.h > create mode 100644 drivers/media/video/mx2_camera.c > > diff --git a/arch/arm/plat-mxc/include/mach/memory.h > b/arch/arm/plat-mxc/include/mach/memory.h > index c4b40c3..5803836 100644 > --- a/arch/arm/plat-mxc/include/mach/memory.h > +++ b/arch/arm/plat-mxc/include/mach/memory.h > @@ -44,12 +44,12 @@ > */ > #define CONSISTENT_DMA_SIZE SZ_8M > > -#elif defined(CONFIG_MX1_VIDEO) > +#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_MX2_VIDEO) > /* > * Increase size of DMA-consistent memory region. > * This is required for i.MX camera driver to capture at least four VGA > frames. > */ > #define CONSISTENT_DMA_SIZE SZ_4M > -#endif /* CONFIG_MX1_VIDEO */ > +#endif /* CONFIG_MX1_VIDEO || CONFIG_MX2_VIDEO */ Why not use CONFIG_VIDEO_MX2 here and get rid of CONFIG_MX2_VIDEO? Best regards Uwe
-- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | http://www.pengutronix.de/ | -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
