Greetings,
I've aquired myself a /Leadtek WinFast PxDVR3200 H/ and am trying to get
it working under Ubuntu 10.04.
It's now installed and showing up in the system. I've extracted the
firmware and installed it as per
http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware
lspci -vv
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI
Video and Audio Decoder (rev 03)
Subsystem: LeadTek Research Inc. Device 6f39
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fac00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+
AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <2us, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [200] Virtual Channel <?>
Kernel driver in use: cx23885
Kernel modules: cx23885
However, when I try to scan for channels I get the following errors
showing up in messages.
scan /usr/share/dvb/dvb-t/au-Brisbane
scanning /usr/share/dvb/dvb-t/au-Brisbane
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 226500000 1 3 9 3 1 1 0
initial transponder 177500000 1 3 9 3 1 1 0
initial transponder 191625000 1 3 9 3 1 1 0
initial transponder 219500000 1 3 9 3 1 1 0
initial transponder 585625000 1 2 9 3 1 2 0
>>> tune to:
226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
....
etc
dmesg has the following errors repeated
[ 61.354294] cx23885 0000:02:00.0: firmware: requesting xc3028-v27.fw
[ 61.379255] xc2028 2-0061: Loading 80 firmware images from
xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 61.577772] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3),
id 0000000000000000.
[ 62.065878] xc2028 2-0061: i2c output error: rc = -5 (should be 64)
[ 62.065886] xc2028 2-0061: -5 returned from send
[ 62.065894] xc2028 2-0061: Error -22 while loading base firmware
Any assistance in helping out with getting this to work would be
appreciated.
Regards,
Dave.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
