On Sat, Jul 10, 2010 at 5:36 AM, Jean-Francois Moine <moin...@free.fr> wrote: > So, the GPIO register is the second one of the bridge. It is > initialized at line 71 of sonixj.c. May you change it from 0x40 to 0x44? > (see attached diff)
I've compiled the driver with this updated setting and it appears to be the same. The microphone works initially, until video is loaded. $ dmesg | grep "gspca" [ 22.141766] gspca: main v2.9.0 registered [ 22.163928] gspca-2.9.50: probing 045e:00f7 [ 22.181869] gspca-2.9.50: video0 created [ 22.181872] gspca-2.9.50: found int in endpoint: 0x83, buffer_len=1, interval=100 [ 22.181894] gspca-2.9.50: 045e:00f7 bad interface 1 [ 22.181902] gspca-2.9.50: 045e:00f7 bad interface 2 [ 544.774056] gspca-2.9.50: found int in endpoint: 0x83, buffer_len=1, interval=100 [ 546.318045] gspca-2.9.50: found int in endpoint: 0x83, buffer_len=1, interval=100 Is this change from 0x40 to 0x44 intended to fix the "bad interface" messages as well as the mic becoming disabled? Also, is a reboot after installing these drivers and changes required? I'm only curious because it takes so much longer to test changes. Thanks. -- Kyle Baker -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
