This patch adds the build infra-structure for Davinci
VPBE dislay driver
Signed-off-by: Manjunath Hadli <manjunath.ha...@ti.com>
Signed-off-by: Muralidharan Karicheri <m-kariche...@ti.com>
Acked-by: Muralidharan Karicheri <m-kariche...@ti.com>
---
drivers/media/video/davinci/Kconfig | 22 +++++
drivers/media/video/davinci/Makefile | 2 +
.../media/video/davinci/davinci_vpbe_readme.txt | 100 ++++++++++++++++++++
3 files changed, 124 insertions(+), 0 deletions(-)
create mode 100644 drivers/media/video/davinci/davinci_vpbe_readme.txt
diff --git a/drivers/media/video/davinci/Kconfig
b/drivers/media/video/davinci/Kconfig
index 6b19540..dab32d5 100644
--- a/drivers/media/video/davinci/Kconfig
+++ b/drivers/media/video/davinci/Kconfig
@@ -91,3 +91,25 @@ config VIDEO_ISIF
To compile this driver as a module, choose M here: the
module will be called vpfe.
+
+config VIDEO_DM644X_VPBE
+ tristate "DM644X VPBE HW module"
+ select VIDEO_VPSS_SYSTEM
+ select VIDEOBUF_DMA_CONTIG
+ help
+ Enables VPBE modules used for display on a DM644x
+ SoC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpbe.
+
+
+config VIDEO_VPBE_DISPLAY
+ tristate "VPBE V4L2 Display driver"
+ select VIDEO_DM644X_VPBE
+ default y
+ help
+ Enables VPBE V4L2 Display driver on a DMXXX device
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpbe_display.
diff --git a/drivers/media/video/davinci/Makefile
b/drivers/media/video/davinci/Makefile
index a379557..ae7dafb 100644
--- a/drivers/media/video/davinci/Makefile
+++ b/drivers/media/video/davinci/Makefile
@@ -16,3 +16,5 @@ obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o
obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o
obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o
obj-$(CONFIG_VIDEO_ISIF) += isif.o
+obj-$(CONFIG_VIDEO_DM644X_VPBE) += vpbe.o vpbe_osd.o vpbe_venc.o
+obj-$(CONFIG_VIDEO_VPBE_DISPLAY) += vpbe_display.o
diff --git a/drivers/media/video/davinci/davinci_vpbe_readme.txt
b/drivers/media/video/davinci/davinci_vpbe_readme.txt
new file mode 100644
index 0000000..e7aabba
--- /dev/null
+++ b/drivers/media/video/davinci/davinci_vpbe_readme.txt
@@ -0,0 +1,100 @@
+
+ VPBE V4L2 driver design
+ ======================================================================
+
+ File partitioning
+ -----------------
+ V4L2 display device driver
+ drivers/media/video/davinci/vpbe_display.c
+ drivers/media/video/davinci/vpbe_display.h
+
+ VPBE display controller
+ drivers/media/video/davinci/vpbe.c
+ drivers/media/video/davinci/vpbe.h
+
+ VPBE venc sub device driver
+ drivers/media/video/davinci/vpbe_venc.c
+ drivers/media/video/davinci/vpbe_venc.h
+ drivers/media/video/davinci/vpbe_venc_regs.h
+
+ VPBE osd driver
+ drivers/media/video/davinci/vpbe_osd.c
+ drivers/media/video/davinci/vpbe_osd.h
+ drivers/media/video/davinci/vpbe_osd_regs.h
+
+ Functional partitioning
+ -----------------------
+
+ Consists of following (in the same order as the list under file
+ partitioning):-
+
+ 1. V4L2 display driver
+ Implements video2 and video3 device nodes and
+ provides v4l2 device interface to manage VID0 and VID1 layers.
+
+ 2. Display controller
+ Loads up venc, osd and external encoders such as ths8200. It provides
+ a set of API calls to V4L2 drivers to set the output/standards
+ in the venc or external sub devices. It also provides
+ a device object to access the services from osd sub device
+ using sub device ops. The connection of external encoders to venc LCD
+ controller port is done at init time based on default output and standard
+ selection or at run time when application change the output through
+ V4L2 IOCTLs.
+
+ When connetected to an external encoder, vpbe controller is also
responsible
+ for setting up the interface between venc and external encoders based on
+ board specific settings (specified in board-xxx-evm.c). This allowes
+ interfacing external encoders such as ths8200. The setup_if_config()
+ is implemented for this as well as configure_venc() (part of the next
patch)
+ API to set timings in venc for a specific display resolution.As of this
+ patch series, the interconnection and enabling ans setting of the external
+ encoders is not present, and would be a part of the next patch series.
+
+ 3. Venc sub device
+ Responsible for setting outputs provides through internal dacs and also
+ setting timings at LCD controller port when external encoders are connected
+ at the port or LCD panel timings required. When external encoder/LCD panel
+ is connected, the timings for a specific standard/preset is retrieved from
+ the board specific table and the values are used to set the timings in
+ venc using non-standard timing mode.
+
+ Support LCD Panel displays using the venc. For example to support a Logic
+ PD display, it requires setting up the LCD controller port with a set of
+ timings for the resolution supported and setting the dot clock. So we could
+ add the available outputs as a board specific entry ( i.e add the "LogicPD"
+ output name to board-xxx-evm.c). A table of timings for various LCDs
+ supported cab be maintained in the board specific setup file to support
+ various LCD displays.
+
+ 4. osd sub device
+ Osd sub device implements all osd layer management and hardware specific
+ features. In the legacy drivers (LSPxxx), the hardware specific features
+ are configured through proprietary IOCTLs at the fb device interface. Since
+ sub devices are going to support device nodes, application will be able
+ to configure the hardware feayture directly by opening the osd sub device
+ node and by calling the related IOCTL. So these proprietary IOCTLs are
+ to be removed from the FB Device driver when doing up port of these
drivers to
+ mainline kernel. The V4L2 and FB device nodes supports only IOCTLS as per
+ the associated spec. The rest of the IOCTLs are to be moved to osd and
+ venc sub devices.
+
+ Current status:-
+
+ A build tested version of vpbe controller is available.
+
+ Following are TBDs.
+
+ vpbe display controller
+ - review and modify the handling of external encoders.
+ - add support for selecting external encoder as default at probe time.
+
+ vpbe venc sub device
+ - add timings for supporting ths8200
+ - add support for LogicPD LCD.
+
+ v4l2 driver
+ - A version is already developed which is to be cleaned up and unit tested
+
+ FB drivers
+ - Add support for fbdev drivers.- Ready and part of subsequent patches.
\ No newline at end of file
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
