Hi,
the following patch adds support for a Terratec Grabster AV MX150 (and
maybe other devices in the Grabster series). This device is an analog
frame grabber device using a tm5600. This device doesn't have a tuner, so
I changed the code to skip the tuner reset if neither has_tuner nor
has_dvb is set.
Holger
diff -urpN --exclude='*~'
linux-2.6.37-rc8/drivers/staging/tm6000/tm6000-cards.c
linux-lts-backport-natty-2.6.37/drivers/staging/tm6000/tm6000-cards.c
--- linux-2.6.37-rc8/drivers/staging/tm6000/tm6000-cards.c 2010-12-29
02:05:48.000000000 +0100
+++ linux-lts-backport-natty-2.6.37/drivers/staging/tm6000/tm6000-cards.c
2011-01-04 10:46:40.582497722 +0100
@@ -50,6 +50,7 @@
#define TM6010_BOARD_BEHOLD_VOYAGER 11
#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
#define TM6010_BOARD_TWINHAN_TU501 13
+#define TM5600_BOARD_TERRATEC_GRABSTER 14
#define TM6000_MAXBOARDS 16
static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
@@ -303,6 +304,19 @@ struct tm6000_board tm6000_boards[] = {
.dvb_led = TM6010_GPIO_5,
.ir = TM6010_GPIO_0,
},
+ },
+ [TM5600_BOARD_TERRATEC_GRABSTER] = {
+ .name = "Terratec Grabster Series",
+ .type = TM5600,
+ .caps = {
+ .has_tuner = 0,
+ .has_dvb = 0,
+ .has_zl10353 = 0,
+ .has_eeprom = 0,
+ .has_remote = 0,
+ },
+ .gpio = {
+ },
}
};
@@ -325,6 +339,7 @@ struct usb_device_id tm6000_id_table[] =
{ USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501
},
{ USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501
},
{ USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501
},
+ { USB_DEVICE(0x0ccd, 0x0079), .driver_info =
TM5600_BOARD_TERRATEC_GRABSTER },
{ },
};
@@ -505,33 +520,35 @@ int tm6000_cards_setup(struct tm6000_cor
* reset, just add the code at the board-specific part
*/
- if (dev->gpio.tuner_reset) {
- for (i = 0; i < 2; i++) {
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x00);
- if (rc < 0) {
- printk(KERN_ERR "Error %i doing tuner reset\n",
rc);
- return rc;
- }
+ if (dev->caps.has_tuner||dev->caps.has_dvb) {
+ if (dev->gpio.tuner_reset) {
+ for (i = 0; i < 2; i++) {
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset,
0x00);
+ if (rc < 0) {
+ printk(KERN_ERR "Error %i doing tuner
reset\n", rc);
+ return rc;
+ }
- msleep(10); /* Just to be conservative */
- rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
- dev->gpio.tuner_reset, 0x01);
- if (rc < 0) {
- printk(KERN_ERR "Error %i doing tuner reset\n",
rc);
- return rc;
- }
- msleep(10);
+ msleep(10); /* Just to be conservative */
+ rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+ dev->gpio.tuner_reset,
0x01);
+ if (rc < 0) {
+ printk(KERN_ERR "Error %i doing tuner
reset\n", rc);
+ return rc;
+ }
+ msleep(10);
- if (!i) {
- rc = tm6000_get_reg32(dev, REQ_40_GET_VERSION,
0, 0);
- if (rc >= 0)
- printk(KERN_DEBUG "board=0x%08x\n", rc);
+ if (!i) {
+ rc = tm6000_get_reg32(dev,
REQ_40_GET_VERSION, 0, 0);
+ if (rc >= 0)
+ printk(KERN_DEBUG
"board=0x%08x\n", rc);
+ }
}
+ } else {
+ printk(KERN_ERR "Tuner reset is not configured\n");
+ return -1;
}
- } else {
- printk(KERN_ERR "Tuner reset is not configured\n");
- return -1;
}
msleep(50);
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
