Hi, > -----Original Message----- > From: ext Laurent Pinchart [mailto:laurent.pinch...@ideasonboard.com] > Sent: 3. toukokuuta 2011 13:49 > To: Jokiniemi Kalle (Nokia-SD/Tampere) > Cc: mauroche...@gmail.com; t...@atomide.com; linux- > o...@vger.kernel.org; linux-media@vger.kernel.org > Subject: Re: [PATCH v3 2/2] OMAP3: RX-51: define vdds_csib regulator supply > > Hi Kalle, > > Thanks for the patch. > > On Tuesday 03 May 2011 12:41:23 Kalle Jokiniemi wrote: > > The RX-51 uses the CSIb IO complex for camera operation. The > > board file is missing definition for the regulator supplying > > the CSIb complex, so this is added for better power > > management. > > > > Signed-off-by: Kalle Jokiniemi <kalle.jokini...@nokia.com> > > --- > > arch/arm/mach-omap2/board-rx51-peripherals.c | 6 ++++++ > > 1 files changed, 6 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c > > b/arch/arm/mach-omap2/board-rx51-peripherals.c index bbcb677..2f12425 > > 100644 > > --- a/arch/arm/mach-omap2/board-rx51-peripherals.c > > +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c > > @@ -337,6 +337,10 @@ static struct omap2_hsmmc_info mmc[] __initdata = > { > > static struct regulator_consumer_supply rx51_vmmc1_supply = > > REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); > > > > +static struct regulator_consumer_supply rx51_vaux2_supply[] = { > > + REGULATOR_SUPPLY("vdds_csib", "omap3isp"), > > +}; > > + > > What about > > static struct regulator_consumer_supply rx51_vaux2_supply = > REGULATOR_SUPPLY("vdds_csib", "omap3isp"); > > instead ? :-) It would be in line with the other vaux supply definitions. > > > static struct regulator_consumer_supply rx51_vaux3_supply = > > REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); > > > > @@ -400,6 +404,8 @@ static struct regulator_init_data rx51_vaux2 = { > > .valid_ops_mask = REGULATOR_CHANGE_MODE > > > > | REGULATOR_CHANGE_STATUS, > > > > }, > > + .num_consumer_supplies = 1, > > + .consumer_supplies = rx51_vaux2_supply, > > and > > .consumer_supplies = &rx51_vaux2_supply, > > here. > > If you're fine with that, there's no need to resubmit, I'll modify this patch > and push the set through my tree (let me know if I can keep your SoB line > with > that change).
Perfectly fine with me, you can keep the SoB line. Thanks, Kalle > > > }; > > > > /* VAUX3 - adds more power to VIO_18 rail */ > > -- > Regards, > > Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
