Em 13-04-2011 21:05, Lutz Sammer escreveu:
>> On 05/04/11 21:07, Steffen Barszus wrote:
>>> On Tue, 05 Apr 2011 13:00:14 +0200
>>> "Issa Gorissen" <flop.m@xxxxxxx> wrote:
>>>
>>>> Hi,
>>>>
>>>> Eutelsat made a recent migration from DVB-S to DVB-S2 (since
>>>> 31/3/2011) on two transponders on HB13E
>>>>
>>>> - HOT BIRD 6 13° Est TP 159 Freq 11,681 Ghz DVB-S2 FEC 3/4 27500
>>>> Msymb/s 0.2 Pilot off Polar H
>>>>
>>>> - HOT BIRD 9 13° Est TP 99 Freq 12,692 Ghz DVB-S2 FEC 3/4 27500
>>>> Msymb/s 0.2 Pilot off Polar H
>>>>
>>>>
>>>> Before those changes, with my TT S2 3200, I was able to watch TV on
>>>> those transponders. Now, I cannot even tune on those transponders. I
>>>> have tried with scan-s2 and w_scan and the latest drivers from git.
>>>> They both find the transponders but cannot tune onto it.
>>>>
>>>> Something noteworthy is that my other card, a DuoFlex S2 can tune
>>>> fine on those transponders.
>>>>
>>>> My question is; can someone try this as well with a TT S2 3200 and
>>>> post the results ?
>>> i read something about it lately here (german!):
>>> http://www.vdr-portal.de/board16-video-disk-recorder/board85-hdtv-dvb-s2/p977938-stb0899-fec-3-4-tester-gesucht/#post977938
>>>
>>> It says in stb0899_drv.c function:
>>> static void stb0899_set_iterations(struct stb0899_state *state)
>>>
>>> This:
>>> reg = STB0899_READ_S2REG(STB0899_S2DEMOD, MAX_ITER);
>>> STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale);
>>> stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_MAX_ITER,
>>> STB0899_OFF0_MAX_ITER, reg);
>>>
>>> should be replaced with this:
>>>
>>> reg = STB0899_READ_S2REG(STB0899_S2FEC, MAX_ITER);
>>> STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale);
>>> stb0899_write_s2reg(state, STB0899_S2FEC, STB0899_BASE_MAX_ITER,
>>> STB0899_OFF0_MAX_ITER, reg);
>>>
>>> Basically replace STB0899_S2DEMOD with STB0899_S2FEC in this 2 lines
>>> affected.
>>>
>>> Kind Regards
>>>
>>> Steffen
>> Hi Steffen,
>>
>> Unfortunately, it does not help in my case. Thx anyway.
>
> Try my locking fix. With above patch I can lock the
> channels without problem.
Can someone confirm that such patch would fix the issue? If so, please
forward it in a way that it could be applied (patch is currently line-wrapped),
and submit with some comments/description and your SOB.
As the patch is currently broken, I'm just marking it as rejected at patchwork.
Manu,
Please take a look on this trouble report.
Thanks!
Mauro.
>
> Johns
>
> diff --git a/drivers/media/dvb/frontends/stb0899_algo.c
> b/drivers/media/dvb/frontends/stb0899_algo.c
> index 2da55ec..55f0c4e 100644
> --- a/drivers/media/dvb/frontends/stb0899_algo.c
> +++ b/drivers/media/dvb/frontends/stb0899_algo.c
> @@ -338,36 +338,42 @@ static enum stb0899_status
> stb0899_check_data(struct stb0899_state *state)
> int lock = 0, index = 0, dataTime = 500, loop;
> u8 reg;
>
> - internal->status = NODATA;
> + reg = stb0899_read_reg(state, STB0899_VSTATUS);
> + lock = STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg);
> + if ( !lock ) {
>
> - /* RESET FEC */
> - reg = stb0899_read_reg(state, STB0899_TSTRES);
> - STB0899_SETFIELD_VAL(FRESACS, reg, 1);
> - stb0899_write_reg(state, STB0899_TSTRES, reg);
> - msleep(1);
> - reg = stb0899_read_reg(state, STB0899_TSTRES);
> - STB0899_SETFIELD_VAL(FRESACS, reg, 0);
> - stb0899_write_reg(state, STB0899_TSTRES, reg);
> + internal->status = NODATA;
>
> - if (params->srate <= 2000000)
> - dataTime = 2000;
> - else if (params->srate <= 5000000)
> - dataTime = 1500;
> - else if (params->srate <= 15000000)
> - dataTime = 1000;
> - else
> - dataTime = 500;
> -
> - stb0899_write_reg(state, STB0899_DSTATUS2, 0x00); /* force
> search loop */
> - while (1) {
> - /* WARNING! VIT LOCKED has to be tested before
> VIT_END_LOOOP */
> - reg = stb0899_read_reg(state, STB0899_VSTATUS);
> - lock = STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg);
> - loop = STB0899_GETFIELD(VSTATUS_END_LOOPVIT, reg);
> + /* RESET FEC */
> + reg = stb0899_read_reg(state, STB0899_TSTRES);
> + STB0899_SETFIELD_VAL(FRESACS, reg, 1);
> + stb0899_write_reg(state, STB0899_TSTRES, reg);
> + msleep(1);
> + reg = stb0899_read_reg(state, STB0899_TSTRES);
> + STB0899_SETFIELD_VAL(FRESACS, reg, 0);
> + stb0899_write_reg(state, STB0899_TSTRES, reg);
>
> - if (lock || loop || (index > dataTime))
> - break;
> - index++;
> + msleep(1);
> + }
> }
>
> if (lock) { /* DATA LOCK indicator */
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
