Add drivers for Standard Definition output (SDO) on Samsung platforms
from S5P family. The driver provides control over streaming analog TV
via Composite connector.

Driver is using:
- v4l2 framework
- runtime PM

Signed-off-by: Tomasz Stanislawski <t.stanisl...@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprow...@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawro...@samsung.com>
Reviewed-by: Hans Verkuil <hverk...@xs4all.nl>
---
 drivers/media/video/s5p-tv/Kconfig    |   11 +
 drivers/media/video/s5p-tv/Makefile   |    2 +
 drivers/media/video/s5p-tv/regs-sdo.h |   63 +++++
 drivers/media/video/s5p-tv/sdo_drv.c  |  479 +++++++++++++++++++++++++++++++++
 4 files changed, 555 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/video/s5p-tv/regs-sdo.h
 create mode 100644 drivers/media/video/s5p-tv/sdo_drv.c

diff --git a/drivers/media/video/s5p-tv/Kconfig 
b/drivers/media/video/s5p-tv/Kconfig
index 893be5b..9c1f634 100644
--- a/drivers/media/video/s5p-tv/Kconfig
+++ b/drivers/media/video/s5p-tv/Kconfig
@@ -46,4 +46,15 @@ config VIDEO_SAMSUNG_S5P_HDMIPHY
          as module. It is an I2C driver, that exposes a V4L2
          subdev for use by other drivers.
 
+config VIDEO_SAMSUNG_S5P_SDO
+       tristate "Samsung Analog TV Driver"
+       depends on VIDEO_DEV && VIDEO_V4L2
+       depends on VIDEO_SAMSUNG_S5P_TV
+       help
+         Say Y here if you want support for the analog TV output
+         interface in S5P Samsung SoC. The driver can be compiled
+         as module. It is an auxiliary driver, that exposes a V4L2
+         subdev for use by other drivers. This driver requires
+         hdmiphy driver to work correctly.
+
 endif # VIDEO_SAMSUNG_S5P_TV
diff --git a/drivers/media/video/s5p-tv/Makefile 
b/drivers/media/video/s5p-tv/Makefile
index 1b07132..c874d16 100644
--- a/drivers/media/video/s5p-tv/Makefile
+++ b/drivers/media/video/s5p-tv/Makefile
@@ -10,4 +10,6 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o
 s5p-hdmiphy-y += hdmiphy_drv.o
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o
 s5p-hdmi-y += hdmi_drv.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o
+s5p-sdo-y += sdo_drv.o
 
diff --git a/drivers/media/video/s5p-tv/regs-sdo.h 
b/drivers/media/video/s5p-tv/regs-sdo.h
new file mode 100644
index 0000000..7f7c2b8
--- /dev/null
+++ b/drivers/media/video/s5p-tv/regs-sdo.h
@@ -0,0 +1,63 @@
+/* drivers/media/video/s5p-tv/regs-sdo.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com/
+ *
+ * SDO register description file
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SAMSUNG_REGS_SDO_H
+#define SAMSUNG_REGS_SDO_H
+
+/*
+ * Register part
+ */
+
+#define SDO_CLKCON                     0x0000
+#define SDO_CONFIG                     0x0008
+#define SDO_VBI                                0x0014
+#define SDO_DAC                                0x003C
+#define SDO_CCCON                      0x0180
+#define SDO_IRQ                                0x0280
+#define SDO_IRQMASK                    0x0284
+#define SDO_VERSION                    0x03D8
+
+/*
+ * Bit definition part
+ */
+
+/* SDO Clock Control Register (SDO_CLKCON) */
+#define SDO_TVOUT_SW_RESET             (1 << 4)
+#define SDO_TVOUT_CLOCK_READY          (1 << 1)
+#define SDO_TVOUT_CLOCK_ON             (1 << 0)
+
+/* SDO Video Standard Configuration Register (SDO_CONFIG) */
+#define SDO_PROGRESSIVE                        (1 << 4)
+#define SDO_NTSC_M                     0
+#define SDO_PAL_M                      1
+#define SDO_PAL_BGHID                  2
+#define SDO_PAL_N                      3
+#define SDO_PAL_NC                     4
+#define SDO_NTSC_443                   8
+#define SDO_PAL_60                     9
+#define SDO_STANDARD_MASK              0xf
+
+/* SDO VBI Configuration Register (SDO_VBI) */
+#define SDO_CVBS_WSS_INS               (1 << 14)
+#define SDO_CVBS_CLOSED_CAPTION_MASK   (3 << 12)
+
+/* SDO DAC Configuration Register (SDO_DAC) */
+#define SDO_POWER_ON_DAC               (1 << 0)
+
+/* SDO Color Compensation On/Off Control (SDO_CCCON) */
+#define SDO_COMPENSATION_BHS_ADJ_OFF   (1 << 4)
+#define SDO_COMPENSATION_CVBS_COMP_OFF (1 << 0)
+
+/* SDO Interrupt Request Register (SDO_IRQ) */
+#define SDO_VSYNC_IRQ_PEND             (1 << 0)
+
+#endif /* SAMSUNG_REGS_SDO_H */
diff --git a/drivers/media/video/s5p-tv/sdo_drv.c 
b/drivers/media/video/s5p-tv/sdo_drv.c
new file mode 100644
index 0000000..4dddd6b
--- /dev/null
+++ b/drivers/media/video/s5p-tv/sdo_drv.c
@@ -0,0 +1,479 @@
+/*
+ * Samsung Standard Definition Output (SDO) driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanisl...@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-subdev.h>
+
+#include "regs-sdo.h"
+
+MODULE_AUTHOR("Tomasz Stanislawski, <t.stanisl...@samsung.com>");
+MODULE_DESCRIPTION("Samsung Standard Definition Output (SDO)");
+MODULE_LICENSE("GPL");
+
+#define SDO_DEFAULT_STD        V4L2_STD_PAL
+
+struct sdo_format {
+       v4l2_std_id id;
+       /* all modes are 720 pixels wide */
+       unsigned int height;
+       unsigned int cookie;
+};
+
+struct sdo_device {
+       /** pointer to device parent */
+       struct device *dev;
+       /** base address of SDO registers */
+       void __iomem *regs;
+       /** SDO interrupt */
+       unsigned int irq;
+       /** DAC source clock */
+       struct clk *sclk_dac;
+       /** DAC clock */
+       struct clk *dac;
+       /** DAC physical interface */
+       struct clk *dacphy;
+       /** clock for control of VPLL */
+       struct clk *fout_vpll;
+       /** regulator for SDO IP power */
+       struct regulator *vdac;
+       /** regulator for SDO plug detection */
+       struct regulator *vdet;
+       /** subdev used as device interface */
+       struct v4l2_subdev sd;
+       /** current format */
+       const struct sdo_format *fmt;
+};
+
+static inline struct sdo_device *sd_to_sdev(struct v4l2_subdev *sd)
+{
+       return container_of(sd, struct sdo_device, sd);
+}
+
+static inline
+void sdo_write_mask(struct sdo_device *sdev, u32 reg_id, u32 value, u32 mask)
+{
+       u32 old = readl(sdev->regs + reg_id);
+       value = (value & mask) | (old & ~mask);
+       writel(value, sdev->regs + reg_id);
+}
+
+static inline
+void sdo_write(struct sdo_device *sdev, u32 reg_id, u32 value)
+{
+       writel(value, sdev->regs + reg_id);
+}
+
+static inline
+u32 sdo_read(struct sdo_device *sdev, u32 reg_id)
+{
+       return readl(sdev->regs + reg_id);
+}
+
+static irqreturn_t sdo_irq_handler(int irq, void *dev_data)
+{
+       struct sdo_device *sdev = dev_data;
+
+       /* clear interrupt */
+       sdo_write_mask(sdev, SDO_IRQ, ~0, SDO_VSYNC_IRQ_PEND);
+       return IRQ_HANDLED;
+}
+
+static void sdo_reg_debug(struct sdo_device *sdev)
+{
+#define DBGREG(reg_id) \
+       dev_info(sdev->dev, #reg_id " = %08x\n", \
+               sdo_read(sdev, reg_id))
+
+       DBGREG(SDO_CLKCON);
+       DBGREG(SDO_CONFIG);
+       DBGREG(SDO_VBI);
+       DBGREG(SDO_DAC);
+       DBGREG(SDO_IRQ);
+       DBGREG(SDO_IRQMASK);
+       DBGREG(SDO_VERSION);
+}
+
+static const struct sdo_format sdo_format[] = {
+       { V4L2_STD_PAL_N,       .height = 576, .cookie = SDO_PAL_N },
+       { V4L2_STD_PAL_Nc,      .height = 576, .cookie = SDO_PAL_NC },
+       { V4L2_STD_PAL_M,       .height = 480, .cookie = SDO_PAL_M },
+       { V4L2_STD_PAL_60,      .height = 480, .cookie = SDO_PAL_60 },
+       { V4L2_STD_NTSC_443,    .height = 480, .cookie = SDO_NTSC_443 },
+       { V4L2_STD_PAL,         .height = 576, .cookie = SDO_PAL_BGHID },
+       { V4L2_STD_NTSC_M,      .height = 480, .cookie = SDO_NTSC_M },
+};
+
+static const struct sdo_format *sdo_find_format(v4l2_std_id id)
+{
+       int i;
+       for (i = 0; i < ARRAY_SIZE(sdo_format); ++i)
+               if (sdo_format[i].id & id)
+                       return &sdo_format[i];
+       return NULL;
+}
+
+static int sdo_g_tvnorms_output(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+       *std = V4L2_STD_NTSC_M | V4L2_STD_PAL_M | V4L2_STD_PAL |
+               V4L2_STD_PAL_N | V4L2_STD_PAL_Nc |
+               V4L2_STD_NTSC_443 | V4L2_STD_PAL_60;
+       return 0;
+}
+
+static int sdo_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+       struct sdo_device *sdev = sd_to_sdev(sd);
+       const struct sdo_format *fmt;
+       fmt = sdo_find_format(std);
+       if (fmt == NULL)
+               return -EINVAL;
+       sdev->fmt = fmt;
+       return 0;
+}
+
+static int sdo_g_std_output(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+       *std = sd_to_sdev(sd)->fmt->id;
+       return 0;
+}
+
+static int sdo_g_mbus_fmt(struct v4l2_subdev *sd,
+       struct v4l2_mbus_framefmt *fmt)
+{
+       struct sdo_device *sdev = sd_to_sdev(sd);
+
+       if (!sdev->fmt)
+               return -ENXIO;
+       /* all modes are 720 pixels wide */
+       fmt->width = 720;
+       fmt->height = sdev->fmt->height;
+       fmt->code = V4L2_MBUS_FMT_FIXED;
+       fmt->field = V4L2_FIELD_INTERLACED;
+       return 0;
+}
+
+static int sdo_s_power(struct v4l2_subdev *sd, int on)
+{
+       struct sdo_device *sdev = sd_to_sdev(sd);
+       struct device *dev = sdev->dev;
+       int ret;
+
+       dev_info(dev, "sdo_s_power(%d)\n", on);
+
+       if (on)
+               ret = pm_runtime_get_sync(dev);
+       else
+               ret = pm_runtime_put_sync(dev);
+
+       /* only values < 0 indicate errors */
+       return IS_ERR_VALUE(ret) ? ret : 0;
+}
+
+static int sdo_streamon(struct sdo_device *sdev)
+{
+       /* set proper clock for Timing Generator */
+       clk_set_rate(sdev->fout_vpll, 54000000);
+       dev_info(sdev->dev, "fout_vpll.rate = %lu\n",
+       clk_get_rate(sdev->fout_vpll));
+       /* enable clock in SDO */
+       sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON);
+       clk_enable(sdev->dacphy);
+       /* enable DAC */
+       sdo_write_mask(sdev, SDO_DAC, ~0, SDO_POWER_ON_DAC);
+       sdo_reg_debug(sdev);
+       return 0;
+}
+
+static int sdo_streamoff(struct sdo_device *sdev)
+{
+       int tries;
+
+       sdo_write_mask(sdev, SDO_DAC, 0, SDO_POWER_ON_DAC);
+       clk_disable(sdev->dacphy);
+       sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON);
+       for (tries = 100; tries; --tries) {
+               if (sdo_read(sdev, SDO_CLKCON) & SDO_TVOUT_CLOCK_READY)
+                       break;
+               mdelay(1);
+       }
+       if (tries == 0)
+               dev_err(sdev->dev, "failed to stop streaming\n");
+       return tries ? 0 : -EIO;
+}
+
+static int sdo_s_stream(struct v4l2_subdev *sd, int on)
+{
+       struct sdo_device *sdev = sd_to_sdev(sd);
+       return on ? sdo_streamon(sdev) : sdo_streamoff(sdev);
+}
+
+static const struct v4l2_subdev_core_ops sdo_sd_core_ops = {
+       .s_power = sdo_s_power,
+};
+
+static const struct v4l2_subdev_video_ops sdo_sd_video_ops = {
+       .s_std_output = sdo_s_std_output,
+       .g_std_output = sdo_g_std_output,
+       .g_tvnorms_output = sdo_g_tvnorms_output,
+       .g_mbus_fmt = sdo_g_mbus_fmt,
+       .s_stream = sdo_s_stream,
+};
+
+static const struct v4l2_subdev_ops sdo_sd_ops = {
+       .core = &sdo_sd_core_ops,
+       .video = &sdo_sd_video_ops,
+};
+
+static int sdo_runtime_suspend(struct device *dev)
+{
+       struct v4l2_subdev *sd = dev_get_drvdata(dev);
+       struct sdo_device *sdev = sd_to_sdev(sd);
+
+       dev_info(dev, "suspend\n");
+       regulator_disable(sdev->vdet);
+       regulator_disable(sdev->vdac);
+       clk_disable(sdev->sclk_dac);
+       return 0;
+}
+
+static int sdo_runtime_resume(struct device *dev)
+{
+       struct v4l2_subdev *sd = dev_get_drvdata(dev);
+       struct sdo_device *sdev = sd_to_sdev(sd);
+
+       dev_info(dev, "resume\n");
+       clk_enable(sdev->sclk_dac);
+       regulator_enable(sdev->vdac);
+       regulator_enable(sdev->vdet);
+
+       /* software reset */
+       sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_SW_RESET);
+       mdelay(10);
+       sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_SW_RESET);
+
+       /* setting TV mode */
+       sdo_write_mask(sdev, SDO_CONFIG, sdev->fmt->cookie, SDO_STANDARD_MASK);
+       /* XXX: forcing interlaced mode using undocumented bit */
+       sdo_write_mask(sdev, SDO_CONFIG, 0, SDO_PROGRESSIVE);
+       /* turn all VBI off */
+       sdo_write_mask(sdev, SDO_VBI, 0, SDO_CVBS_WSS_INS |
+               SDO_CVBS_CLOSED_CAPTION_MASK);
+       /* turn all post processing off */
+       sdo_write_mask(sdev, SDO_CCCON, ~0, SDO_COMPENSATION_BHS_ADJ_OFF |
+               SDO_COMPENSATION_CVBS_COMP_OFF);
+       sdo_reg_debug(sdev);
+       return 0;
+}
+
+static const struct dev_pm_ops sdo_pm_ops = {
+       .runtime_suspend = sdo_runtime_suspend,
+       .runtime_resume  = sdo_runtime_resume,
+};
+
+static int __devinit sdo_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct sdo_device *sdev;
+       struct resource *res;
+       int ret = 0;
+       struct clk *sclk_vpll;
+
+       dev_info(dev, "probe start\n");
+       sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
+       if (!sdev) {
+               dev_err(dev, "not enough memory.\n");
+               ret = -ENOMEM;
+               goto fail;
+       }
+       sdev->dev = dev;
+
+       /* mapping registers */
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (res == NULL) {
+               dev_err(dev, "get memory resource failed.\n");
+               ret = -ENXIO;
+               goto fail_sdev;
+       }
+
+       sdev->regs = ioremap(res->start, resource_size(res));
+       if (sdev->regs == NULL) {
+               dev_err(dev, "register mapping failed.\n");
+               ret = -ENXIO;
+               goto fail_sdev;
+       }
+
+       /* acquiring interrupt */
+       res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+       if (res == NULL) {
+               dev_err(dev, "get interrupt resource failed.\n");
+               ret = -ENXIO;
+               goto fail_regs;
+       }
+       ret = request_irq(res->start, sdo_irq_handler, 0, "s5p-sdo", sdev);
+       if (ret) {
+               dev_err(dev, "request interrupt failed.\n");
+               goto fail_regs;
+       }
+       sdev->irq = res->start;
+
+       /* acquire clocks */
+       sdev->sclk_dac = clk_get(dev, "sclk_dac");
+       if (IS_ERR_OR_NULL(sdev->sclk_dac)) {
+               dev_err(dev, "failed to get clock 'sclk_dac'\n");
+               ret = -ENXIO;
+               goto fail_irq;
+       }
+       sdev->dac = clk_get(dev, "dac");
+       if (IS_ERR_OR_NULL(sdev->dac)) {
+               dev_err(dev, "failed to get clock 'dac'\n");
+               ret = -ENXIO;
+               goto fail_sclk_dac;
+       }
+       sdev->dacphy = clk_get(dev, "dacphy");
+       if (IS_ERR_OR_NULL(sdev->dacphy)) {
+               dev_err(dev, "failed to get clock 'dacphy'\n");
+               ret = -ENXIO;
+               goto fail_dac;
+       }
+       sclk_vpll = clk_get(dev, "sclk_vpll");
+       if (IS_ERR_OR_NULL(sclk_vpll)) {
+               dev_err(dev, "failed to get clock 'sclk_vpll'\n");
+               ret = -ENXIO;
+               goto fail_dacphy;
+       }
+       clk_set_parent(sdev->sclk_dac, sclk_vpll);
+       clk_put(sclk_vpll);
+       sdev->fout_vpll = clk_get(dev, "fout_vpll");
+       if (IS_ERR_OR_NULL(sdev->fout_vpll)) {
+               dev_err(dev, "failed to get clock 'fout_vpll'\n");
+               goto fail_dacphy;
+       }
+       dev_info(dev, "fout_vpll.rate = %lu\n", clk_get_rate(sclk_vpll));
+
+       /* acquire regulator */
+       sdev->vdac = regulator_get(dev, "vdd33a_dac");
+       if (IS_ERR_OR_NULL(sdev->vdac)) {
+               dev_err(dev, "failed to get regulator 'vdac'\n");
+               goto fail_fout_vpll;
+       }
+       sdev->vdet = regulator_get(dev, "vdet");
+       if (IS_ERR_OR_NULL(sdev->vdet)) {
+               dev_err(dev, "failed to get regulator 'vdet'\n");
+               goto fail_vdac;
+       }
+
+       /* enable gate for dac clock, because mixer uses it */
+       clk_enable(sdev->dac);
+
+       /* configure power management */
+       pm_runtime_enable(dev);
+
+       /* configuration of interface subdevice */
+       v4l2_subdev_init(&sdev->sd, &sdo_sd_ops);
+       sdev->sd.owner = THIS_MODULE;
+       strlcpy(sdev->sd.name, "s5p-sdo", sizeof sdev->sd.name);
+
+       /* set default format */
+       sdev->fmt = sdo_find_format(SDO_DEFAULT_STD);
+       BUG_ON(sdev->fmt == NULL);
+
+       /* keeping subdev in device's private for use by other drivers */
+       dev_set_drvdata(dev, &sdev->sd);
+
+       dev_info(dev, "probe succeeded\n");
+       return 0;
+
+fail_vdac:
+       regulator_put(sdev->vdac);
+fail_fout_vpll:
+       clk_put(sdev->fout_vpll);
+fail_dacphy:
+       clk_put(sdev->dacphy);
+fail_dac:
+       clk_put(sdev->dac);
+fail_sclk_dac:
+       clk_put(sdev->sclk_dac);
+fail_irq:
+       free_irq(sdev->irq, sdev);
+fail_regs:
+       iounmap(sdev->regs);
+fail_sdev:
+       kfree(sdev);
+fail:
+       dev_info(dev, "probe failed\n");
+       return ret;
+}
+
+static int __devexit sdo_remove(struct platform_device *pdev)
+{
+       struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+       struct sdo_device *sdev = sd_to_sdev(sd);
+
+       pm_runtime_disable(&pdev->dev);
+       clk_disable(sdev->dac);
+       regulator_put(sdev->vdet);
+       regulator_put(sdev->vdac);
+       clk_put(sdev->fout_vpll);
+       clk_put(sdev->dacphy);
+       clk_put(sdev->dac);
+       clk_put(sdev->sclk_dac);
+       free_irq(sdev->irq, sdev);
+       iounmap(sdev->regs);
+       kfree(sdev);
+
+       dev_info(&pdev->dev, "remove successful\n");
+       return 0;
+}
+
+static struct platform_driver sdo_driver __refdata = {
+       .probe = sdo_probe,
+       .remove = __devexit_p(sdo_remove),
+       .driver = {
+               .name = "s5p-sdo",
+               .owner = THIS_MODULE,
+               .pm = &sdo_pm_ops,
+       }
+};
+
+static int __init sdo_init(void)
+{
+       int ret;
+       static const char banner[] __initdata = KERN_INFO \
+               "Samsung Standard Definition Output (SDO) driver, "
+               "(c) 2010-2011 Samsung Electronics Co., Ltd.\n";
+       printk(banner);
+
+       ret = platform_driver_register(&sdo_driver);
+       if (ret)
+               printk(KERN_ERR "SDO platform driver register failed\n");
+
+       return ret;
+}
+module_init(sdo_init);
+
+static void __exit sdo_exit(void)
+{
+       platform_driver_unregister(&sdo_driver);
+}
+module_exit(sdo_exit);
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to