Em 05-07-2011 10:20, Hans Verkuil escreveu:
>> I failed to see what information is provided by the "presets" name. If this
>> were removed
>> from the ioctl, and fps would be added instead, the API would be clearer.
>> The only
>> adjustment would be to use "index" as the preset selection key. Anyway, it
>> is too late
>> for such change. We need to live with that.
>
> Adding the fps solves nothing. Because that still does not give you specific
> timings.
> You can have 1920x1080P60 that has quite different timings from the CEA-861
> standard
> and that may not be supported by a TV.
>
> If you are working with HDMI, then you may want to filter all supported
> presets to
> those of the CEA standard.
>
> That's one thing that is missing at the moment: that presets belonging to a
> certain
> standard get their own range. Since we only do CEA861 right now it hasn't
> been an
> issue, but it will.
I prepared a long email about that, but then I realized that we're investing
our time into
something broken, at the light of all DV timing standards. So, I've dropped it
and
started from scratch.
>From what I've got, there are some hardware that can only do a limited set of
>DV timings.
If this were not the case, we could simply just use the
VIDIOC_S_DV_TIMINGS/VIDIOC_G_DV_TIMINGS,
and put the CEA 861 and VESA timings into some userspace library.
In other words, the PRESET API is meant to solve the case where hardware only
support
a limited set of frequencies, that may or may not be inside the CEA standard.
Let's assume we never added the current API, and discuss how it would properly
fulfill
the user needs. An API that would likely work is:
struct v4l2_dv_enum_preset2 {
__u32 index;
__u8 name[32]; /* Name of the preset timing */
struct v4l2_fract fps;
#define DV_PRESET_IS_PROGRESSIVE 1<<31
#define DV_PRESET_SPEC(flag) (flag && 0xff)
#define DV_PRESET_IS_CEA861 1
#define DV_PRESET_IS_DMT 2
#define DV_PRESET_IS_CVF 3
#define DV_PRESET_IS_GTF 4
#define DV_PRESET_IS_VENDOR_SPECIFIC 5
__u32 flags; /* Interlaced/progressive, DV specs, etc */
__u32 width; /* width in pixels */
__u32 height; /* height in lines */
__u32 polarities; /* Positive or negative polarity */
__u64 pixelclock; /* Pixel clock in HZ. Ex. 74.25MHz->74250000 */
__u32 hfrontporch; /* Horizpontal front porch in pixels */
__u32 hsync; /* Horizontal Sync length in pixels */
__u32 hbackporch; /* Horizontal back porch in pixels */
__u32 vfrontporch; /* Vertical front porch in pixels */
__u32 vsync; /* Vertical Sync length in lines */
__u32 vbackporch; /* Vertical back porch in lines */
__u32 il_vfrontporch; /* Vertical front porch for bottom field of
* interlaced field formats
*/
__u32 il_vsync; /* Vertical sync length for bottom field of
* interlaced field formats
*/
__u32 il_vbackporch; /* Vertical back porch for bottom field of
* interlaced field formats
*/
__u32 reserved[4];
};
#define VIDIOC_ENUM_DV_PRESETS2 _IOWR('V', 83, struct v4l2_dv_enum_preset2)
#define VIDIOC_S_DV_PRESET2 _IOWR('V', 84, u32 index)
#define VIDIOC_G_DV_PRESET2 _IOWR('V', 85, u32 index)
Such preset API seems to work for all cases. Userspace can use any DV timing
information to select the desired format, and don't need to have a switch for
a preset macro to try to guess what the format actually means. Also, there's no
need to touch at the API spec every time a new DV timeline is needed.
Also, it should be noticed that, since the size of the data on the above
definitions
are different than the old ones, _IO macros will provide a different magic
number,
so, adding these won't break the existing API.
So, I think we should work on this proposal, and mark the existing one as
deprecated.
Thanks,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
