Hi Guennadi,
On Monday 05 September 2011 11:51:57 Guennadi Liakhovetski wrote:
> On Mon, 5 Sep 2011, Laurent Pinchart wrote:
> > On Monday 05 September 2011 11:10:48 Bastian Hecht wrote:
> > > 2011/8/31 Laurent Pinchart:
> > > > On Wednesday 31 August 2011 19:06:25 Laurent Pinchart wrote:
> > > >> On Wednesday 31 August 2011 17:05:52 Bastian Hecht wrote:
> > > >> > This patch adds the ability to get arbitrary resolutions with a
> > > >> > width up to 2592 and a height up to 720 pixels instead of the
> > > >> > standard 1280x720 only.
> > > >> >
> > > >> > Signed-off-by: Bastian Hecht <hec...@gmail.com>
> > > >> > ---
> > > >> > diff --git a/drivers/media/video/ov5642.c
> > > >> > b/drivers/media/video/ov5642.c index 6410bda..87b432e 100644
> > > >> > --- a/drivers/media/video/ov5642.c
> > > >> > +++ b/drivers/media/video/ov5642.c
> > > >>
> > > >> [snip]
> > > >>
> > > >> > @@ -684,107 +737,101 @@ static int ov5642_write_array(struct
> > > >> > i2c_client
> > > >>
> > > >> [snip]
> > > >>
> > > >> > -static int ov5642_s_fmt(struct v4l2_subdev *sd,
> > > >> > - struct v4l2_mbus_framefmt *mf)
> > > >> > +static int ov5642_s_fmt(struct v4l2_subdev *sd, struct
> > > >> > v4l2_mbus_framefmt *mf) {
> > > >> >
> > > >> > struct i2c_client *client = v4l2_get_subdevdata(sd);
> > > >> > struct ov5642 *priv = to_ov5642(client);
> > > >> >
> > > >> > -
> > > >> > - dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code);
> > > >> > + int ret;
> > > >> >
> > > >> > /* MIPI CSI could have changed the format, double-check */
> > > >> > if (!ov5642_find_datafmt(mf->code))
> > > >> >
> > > >> > return -EINVAL;
> > > >> >
> > > >> > ov5642_try_fmt(sd, mf);
> > > >> >
> > > >> > -
> > > >> >
> > > >> > priv->fmt = ov5642_find_datafmt(mf->code);
> > > >> >
> > > >> > - ov5642_write_array(client, ov5642_default_regs_init);
> > > >> > - ov5642_set_resolution(client);
> > > >> > - ov5642_write_array(client, ov5642_default_regs_finalise);
> > > >> > + ret = ov5642_write_array(client, ov5642_default_regs_init);
> > > >> > + if (!ret)
> > > >> > + ret = ov5642_set_resolution(sd);
> > > >> > + if (!ret)
> > > >> > + ret = ov5642_write_array(client,
> > > >> > ov5642_default_regs_finalise);
> > > >>
> > > >> You shouldn't write anything to the sensor here. As only .s_crop can
> > > >> currently change the format, .s_fmt should just return the current
> > > >> format without performing any change or writing anything to the
> > > >> device.
> > >
> > > We talked about it in the ov5642 controls thread. I need to initialize
> > > the sensor at some point and it doesn't work to divide the calls
> > > between different locations.
> >
> > Sure, but calling s_fmt isn't mandatory for hosts/bridges. What about
> > moving sensor initialization to s_stream() ?
>
> Throughout the development of this driver, I was opposing the "delayed
> configuration" approach. I.e., the approach, in which all the ioctl()s,
> like S_FMT, S_CROP, etc. only store user values internally, and the actual
> hardware configuration is only performed at STREAMON time. There are
> several reasons to this: the spec says "the driver may program the
> hardware, allocate resources and generally prepare for data exchange"
> (yes, "may" != "must"), most drivers seem to do the same, the possibility
> to check and return any hardware errors, returned by this operation, I
> probably have forgotten something. But if we ignore all these reasons as
> insufficiently important, then yes, doing the actualy hardware
> configuration in .s_stream() brings a couple of advantages with it,
> especially for drivers / devices like this one.
>
> So, if there are no strong objections, maybe indeed move this back to
> .s_stream() would be the better solution here.
I have no strong opinion here. Your points are certainly valid. I'm fine with
performing direct hardware setup in .s_crop(), but doing it in .s_fmt() looks
weird to me as .s_fmt() doesn't perform any operation now that the driver
moved to using .s_crop(). Without delayed initialization I believe the device
should be initialized when powered up, and have its crop rectangle altered in
.s_crop().
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
