Hello,
I am trying to run Mystique SaTiX-S2 CI Dual cards to fetch and decrypt a
number of channels 24/7. I got it to work with the ngene/cxd2099 drivers
(passing the stream through the sec0 device etc), but one remaining issue is
that the driver occasionally reports a command timeout followed by more errors
from the CI:
Sep 6 08:46:48 s102-34 kernel: [1636918.174974] slot_shutdown
Sep 6 08:46:50 s102-34 kernel: [1636920.481706] dvb_ca adapter 2: DVB CAM
detected and initialised successfully
(Running fine...)
Sep 10 09:20:41 s102-34 kernel: [1984551.380033] ngene: Command timeout cmd=03
prev=04
Sep 10 09:20:41 s102-34 kernel: [1984551.384675] host_to_ngene (c000): 03 04 80
01 01 00 00 00
Sep 10 09:20:41 s102-34 kernel: [1984551.389345] ngene_to_host (c100): 00 00 00
00 00 00 00 00
Sep 10 09:20:41 s102-34 kernel: [1984551.393900] dev->hosttongene (f3025000):
03 04 80 01 01 00 00 00
Sep 10 09:20:41 s102-34 kernel: [1984551.398551] dev->ngenetohost (f3025100):
00 00 00 00 00 00 00 00
Sep 10 09:20:41 s102-34 kernel: [1984551.403176] error in i2c_read
Sep 10 09:20:41 s102-34 kernel: [1984551.407999] Failed to write to I2C!
Sep 10 09:20:41 s102-34 kernel: [1984551.412801] Failed to write to I2C!
Sep 10 09:20:41 s102-34 kernel: [1984551.417474] Failed to write to I2C!
Sep 10 09:20:41 s102-34 kernel: [1984551.422085] Failed to write to I2C!
Sep 10 09:20:41 s102-34 kernel: [1984551.426605] Failed to write to I2C!
Sep 10 09:20:41 s102-34 kernel: [1984551.512361] Failed to write to I2C
register 00@40!
Sep 10 09:20:41 s102-34 kernel: [1984551.516719] Failed to write to I2C
register 00@40!
Sep 10 09:20:41 s102-34 kernel: [1984551.520784] DR
Sep 10 09:20:41 s102-34 kernel: [1984551.520789] WC
Sep 10 09:20:41 s102-34 kernel: [1984551.521108] Failed to write to I2C
register 00@40!
Sep 10 09:20:41 s102-34 kernel: [1984551.525402] Failed to write to I2C
register 00@40!
Sep 10 09:20:41 s102-34 kernel: [1984551.529326] NO CAM
Sep 10 09:20:41 s102-34 kernel: [1984551.529652] Failed to write to I2C
register 00@40!
Sep 10 09:20:41 s102-34 kernel: [1984551.533528] slot_shutdown
Sep 10 09:20:41 s102-34 kernel: [1984551.533853] Failed to write to I2C
register 00@40!
Sep 10 09:20:41 s102-34 kernel: [1984551.538034] Failed to write to I2C
register 00@40!
Sep 10 09:20:41 s102-34 kernel: [1984551.542166] Failed to write to I2C
register 00@40!
>From the moment that happens, I can't do anything with the card: all ioctls
>fail even after re-opening the adapter or after reloading the drivers. Only a
>reboot can bring it back to a good state.
This condition is not so frequent, I've seen it happen maybe 5 times running a
dozen cards for a week. Has anyone experienced it? Is this something the driver
would be able to recover from?
Versions details below,
Thanks,
--
Eric
Kernel:
linux-image-3.0.0-1-686-pae Debian package (32-bit)
Modules built from v4l-dvb:
cxd2099
dvb_core
lnbp21
ngene
stv090x
stv6110x
Dmesg output from loading the drivers:
slot_shutdown
ngene 0000:03:00.0: PCI INT A disabled
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to
[email protected]):
3d589db03f09c1ace6f71849085595f1f114cd3c [media] v4l: mt9v032: Fix
Bayer pattern
fcbd986d61c726d64db940b27d4f3604a6cbecb0 [media] V4L: mt9m111: rewrite
set_pixfmt
4e817223d7f4cf8b740037be4a1ca1578850e8c9 [media] V4L: mt9m111: fix
missing return value check mt9m111_reg_clear
nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
ngene 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ngene: Found Mystique SaTiX-S2 Dual (v2)
ngene 0000:03:00.0: setting latency timer to 64
ngene: Device version 1
ngene: Loading firmware file ngene_18.fw.
ngene 0000:03:00.0: irq 68 for MSI/MSI-X
Attached CXD2099AR at 40
LNBx2x attached on addr=a
stv6110x_attach: Attaching STV6110x
DVB: registering new adapter (nGene)
DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
LNBx2x attached on addr=8
stv6110x_attach: Attaching STV6110x
DVB: registering new adapter (nGene)
DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
No demod found on chan 2
No demod found on chan 3
DVB: registering new adapter (nGene)
>From lspci:
03:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding
AG Device [18c3:0720] (rev 01)
Subsystem: Micronas Semiconductor Holding AG Device [18c3:db02]
Flags: bus master, fast devsel, latency 0, IRQ 68
Memory at b8910000 (32-bit, non-prefetchable) [size=64K]
Memory at b8900000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [100] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [400] Virtual Channel
Kernel driver in use: ngene
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
