One more clean-up possibility:
On Tue, 13 Sep 2011, Scott Jiang wrote:
> this is a v4l2 bridge driver for Blackfin video capture device,
> support ppi interface
>
> Signed-off-by: Scott Jiang <scott.jiang.li...@gmail.com>
> ---
[snip]
> diff --git a/drivers/media/video/blackfin/bfin_capture.c
> b/drivers/media/video/blackfin/bfin_capture.c
> new file mode 100644
> index 0000000..24f89f2
> --- /dev/null
> +++ b/drivers/media/video/blackfin/bfin_capture.c
> @@ -0,0 +1,1099 @@
[snip]
> +static int __devinit bcap_probe(struct platform_device *pdev)
> +{
> + struct bcap_device *bcap_dev;
> + struct video_device *vfd;
> + struct i2c_adapter *i2c_adap;
> + struct bfin_capture_config *config;
> + struct vb2_queue *q;
> + int ret;
> +
> + config = pdev->dev.platform_data;
> + if (!config) {
> + v4l2_err(pdev->dev.driver, "Unable to get board config\n");
> + return -ENODEV;
> + }
> +
> + bcap_dev = kzalloc(sizeof(*bcap_dev), GFP_KERNEL);
> + if (!bcap_dev) {
> + v4l2_err(pdev->dev.driver, "Unable to alloc bcap_dev\n");
> + return -ENOMEM;
> + }
> +
> + bcap_dev->cfg = config;
> +
> + bcap_dev->ppi = create_ppi_instance(config->ppi_info);
> + if (!bcap_dev->ppi) {
> + v4l2_err(pdev->dev.driver, "Unable to create ppi\n");
> + ret = -ENODEV;
> + goto err_free_dev;
> + }
> + bcap_dev->ppi->priv = bcap_dev;
> +
> + bcap_dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
> + if (IS_ERR(bcap_dev->alloc_ctx)) {
> + ret = PTR_ERR(bcap_dev->alloc_ctx);
> + goto err_free_ppi;
> + }
> +
> + vfd = video_device_alloc();
> + if (!vfd) {
> + ret = -ENOMEM;
> + v4l2_err(pdev->dev.driver, "Unable to alloc video device\n");
> + goto err_cleanup_ctx;
> + }
> +
> + /* initialize field of video device */
> + vfd->release = video_device_release;
> + vfd->fops = &bcap_fops;
> + vfd->ioctl_ops = &bcap_ioctl_ops;
> + vfd->tvnorms = 0;
> + vfd->v4l2_dev = &bcap_dev->v4l2_dev;
> + set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags);
> + strncpy(vfd->name, CAPTURE_DRV_NAME, sizeof(vfd->name));
> + bcap_dev->video_dev = vfd;
> +
> + ret = v4l2_device_register(&pdev->dev, &bcap_dev->v4l2_dev);
> + if (ret) {
> + v4l2_err(pdev->dev.driver,
> + "Unable to register v4l2 device\n");
> + goto err_release_vdev;
> + }
> + v4l2_info(&bcap_dev->v4l2_dev, "v4l2 device registered\n");
> +
> + spin_lock_init(&bcap_dev->lock);
> + /* initialize queue */
> + q = &bcap_dev->buffer_queue;
> + memset(q, 0, sizeof(*q));
This is superfluous: bcap_dev is allocated with kzalloc().
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
