On Friday, September 30, 2011 13:22:09 Mauro Carvalho Chehab wrote:
> Em 30-09-2011 06:01, Hans Verkuil escreveu:
> > From: Hans Verkuil <hans.verk...@cisco.com>
> >
>
> From the patch subject: V4L menu: move all platform drivers to the bottom of
> the menu.
>
> It is clear to me that we're analizing drivers by the bus type.
>
> IMO, what we should do is to arrange the driver as:
>
> menuconfig VIDEO_USB
> bool "USB drivers"
> ...
> menuconfig VIDEO_PCI
> bool "PCI drivers"
> ...
> menuconfig VIDEO_PLATFORM
> bool "Platform drivers"
> ...
> menuconfig VIDEO_ISA_PARPORT
> bool "Isa and Parallel port drivers"
>
> This as a big advantage of the current way, as it helps people to discard
> drivers
> that they will never need:
>
> 1) people with modern Desktop PC can just disable VIDEO_PLATFORM and
> VIDEO_ISA_PARPORT;
> 2) people with embedded SoC hardware can disable VIDEO_USB, VIDEO_PCI and
> VIDEO_ISA_PARPORT;
> 3) people with tablets (and similar stuff) can disable VIDEO_ISA_PARPORT and
> VIDEO_PCI.
>
> So, things will be easier for the ones that are compiling the kernel, or
> preparing
> distributions.
OK, I'll do that. You have a point here.
Regards,
Hans
>
> Regards,
> Mauro
>
> > Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
> > ---
> > drivers/media/video/Kconfig | 106
> > ++++++++++++++++++++++---------------------
> > 1 files changed, 55 insertions(+), 51 deletions(-)
> >
> > diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> > index fafc9ba..07d31d4 100644
> > --- a/drivers/media/video/Kconfig
> > +++ b/drivers/media/video/Kconfig
> > @@ -646,25 +646,6 @@ config USB_S2255
> >
> > endif # V4L_USB_DRIVERS
> >
> > -config VIDEO_SH_VOU
> > - tristate "SuperH VOU video output driver"
> > - depends on VIDEO_DEV && ARCH_SHMOBILE
> > - select VIDEOBUF_DMA_CONTIG
> > - help
> > - Support for the Video Output Unit (VOU) on SuperH SoCs.
> > -
> > -config VIDEO_VIU
> > - tristate "Freescale VIU Video Driver"
> > - depends on VIDEO_V4L2 && PPC_MPC512x
> > - select VIDEOBUF_DMA_CONTIG
> > - default y
> > - ---help---
> > - Support for Freescale VIU video driver. This device captures
> > - video data, or overlays video on DIU frame buffer.
> > -
> > - Say Y here if you want to enable VIU device on MPC5121e Rev2+.
> > - In doubt, say N.
> > -
> > config VIDEO_VIVI
> > tristate "Virtual Video Driver"
> > depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
> > @@ -679,20 +660,8 @@ config VIDEO_VIVI
> > Say Y here if you want to test video apps or debug V4L devices.
> > In doubt, say N.
> >
> > -source "drivers/media/video/davinci/Kconfig"
> > -
> > -source "drivers/media/video/omap/Kconfig"
> > -
> > source "drivers/media/video/bt8xx/Kconfig"
> >
> > -config VIDEO_VINO
> > - tristate "SGI Vino Video For Linux"
> > - depends on I2C && SGI_IP22 && VIDEO_V4L2
> > - select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
> > - help
> > - Say Y here to build in support for the Vino video input system found
> > - on SGI Indy machines.
> > -
> > source "drivers/media/video/zoran/Kconfig"
> >
> > config VIDEO_MEYE
> > @@ -711,16 +680,6 @@ config VIDEO_MEYE
> >
> > source "drivers/media/video/saa7134/Kconfig"
> >
> > -config VIDEO_TIMBERDALE
> > - tristate "Support for timberdale Video In/LogiWIN"
> > - depends on VIDEO_V4L2 && I2C && DMADEVICES
> > - select DMA_ENGINE
> > - select TIMB_DMA
> > - select VIDEO_ADV7180
> > - select VIDEOBUF_DMA_CONTIG
> > - ---help---
> > - Add support for the Video In peripherial of the timberdale FPGA.
> > -
> > source "drivers/media/video/cx88/Kconfig"
> >
> > source "drivers/media/video/cx23885/Kconfig"
> > @@ -735,6 +694,61 @@ source "drivers/media/video/saa7164/Kconfig"
> >
> > source "drivers/media/video/marvell-ccic/Kconfig"
> >
> > +config VIDEO_VIA_CAMERA
> > + tristate "VIAFB camera controller support"
> > + depends on FB_VIA
> > + select VIDEOBUF_DMA_SG
> > + select VIDEO_OV7670
> > + help
> > + Driver support for the integrated camera controller in VIA
> > + Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
> > + with ov7670 sensors.
> > +
> > +#
> > +# Platform multimedia device configuration
> > +#
> > +
> > +source "drivers/media/video/davinci/Kconfig"
> > +
> > +source "drivers/media/video/omap/Kconfig"
> > +
> > +config VIDEO_SH_VOU
> > + tristate "SuperH VOU video output driver"
> > + depends on VIDEO_DEV && ARCH_SHMOBILE
> > + select VIDEOBUF_DMA_CONTIG
> > + help
> > + Support for the Video Output Unit (VOU) on SuperH SoCs.
> > +
> > +config VIDEO_VIU
> > + tristate "Freescale VIU Video Driver"
> > + depends on VIDEO_V4L2 && PPC_MPC512x
> > + select VIDEOBUF_DMA_CONTIG
> > + default y
> > + ---help---
> > + Support for Freescale VIU video driver. This device captures
> > + video data, or overlays video on DIU frame buffer.
> > +
> > + Say Y here if you want to enable VIU device on MPC5121e Rev2+.
> > + In doubt, say N.
> > +
> > +config VIDEO_TIMBERDALE
> > + tristate "Support for timberdale Video In/LogiWIN"
> > + depends on VIDEO_V4L2 && I2C && DMADEVICES
> > + select DMA_ENGINE
> > + select TIMB_DMA
> > + select VIDEO_ADV7180
> > + select VIDEOBUF_DMA_CONTIG
> > + ---help---
> > + Add support for the Video In peripherial of the timberdale FPGA.
> > +
> > +config VIDEO_VINO
> > + tristate "SGI Vino Video For Linux"
> > + depends on I2C && SGI_IP22 && VIDEO_V4L2
> > + select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
> > + help
> > + Say Y here to build in support for the Vino video input system found
> > + on SGI Indy machines.
> > +
> > config VIDEO_M32R_AR
> > tristate "AR devices"
> > depends on M32R && VIDEO_V4L2
> > @@ -754,16 +768,6 @@ config VIDEO_M32R_AR_M64278
> > To compile this driver as a module, choose M here: the
> > module will be called arv.
> >
> > -config VIDEO_VIA_CAMERA
> > - tristate "VIAFB camera controller support"
> > - depends on FB_VIA
> > - select VIDEOBUF_DMA_SG
> > - select VIDEO_OV7670
> > - help
> > - Driver support for the integrated camera controller in VIA
> > - Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
> > - with ov7670 sensors.
> > -
> > config VIDEO_OMAP3
> > tristate "OMAP 3 Camera support (EXPERIMENTAL)"
> > select OMAP_IOMMU
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
