On Thu, Oct 13, 2011 at 7:06 PM, Benjamin Larsson <benja...@southpole.se> wrote:
> On 10/13/2011 07:48 PM, Devin Heitmueller wrote:
>> On Thu, Oct 13, 2011 at 12:19 PM, Antti Palosaari <cr...@iki.fi> wrote:
>>>> You were close:  em2884, drx-k, xc5000, and for analog it uses the
>>>> afv4910b.
>>> Then it should be peace of cake at least for digital side.
>> I don't think we've ever done xc5000 on an em28xx before, so it's
>> entirely possible that the xc5000 clock stretching will expose bugs in
>> the em28xx i2c implementation (it uncovered bugs in essentially every
>> other bridge driver I did work on).
>> That, and we don't know how much is hard-coded into the drx-k driver
>> making it specific to the couple of device it's currently being used
>> with.
>> But yeah, it shouldn't be rocket science.  I added support for the
>> board in my OSX driver and it only took me a couple of hours.
>> Devin
> Eddi De Pieri has patches for the HVR-930C that works somewhat. The
> hardware in that stick is the same.
> MvH
> Benjamin Larsson

While the basic chips used are different, they are completely
different hardware designs and likely have different GPIO
configurations as well as IF specs.


Devin J. Heitmueller - Kernel Labs
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to