Hi Gary, On Wednesday 30 November 2011 15:13:18 Gary Thomas wrote: > On 2011-11-28 05:49, Laurent Pinchart wrote: > > On Monday 28 November 2011 13:42:47 Gary Thomas wrote: > >> On 2011-11-28 04:07, Laurent Pinchart wrote: > >>> On Friday 25 November 2011 12:50:25 Gary Thomas wrote: > >>>> On 2011-11-24 04:28, Laurent Pinchart wrote: > >>>>> On Wednesday 16 November 2011 13:03:11 Gary Thomas wrote: > >>>>>> On 2011-11-15 18:26, Laurent Pinchart wrote: > >>>>>>> On Monday 14 November 2011 12:42:54 Gary Thomas wrote: > > [snip] > > > >>>>>>>> Here's my pipeline: > >>>>>>>> media-ctl -r > >>>>>>>> media-ctl -l '"mt9p031 3-005d":0->"OMAP3 ISP CCDC":0[1]' > >>>>>>>> media-ctl -l '"OMAP3 ISP CCDC":2->"OMAP3 ISP preview":0[1]' > >>>>>>>> media-ctl -l '"OMAP3 ISP preview":1->"OMAP3 ISP > >>>>>>>> resizer":0[1]' media-ctl -l '"OMAP3 ISP resizer":1->"OMAP3 > >>>>>>>> ISP resizer output":0[1]' media-ctl -f '"mt9p031 > >>>>>>>> 3-005d":0[SGRBG12 2592x1944]' media-ctl -f '"OMAP3 ISP > >>>>>>>> CCDC":0 [SGRBG10 2592x1944]' > >>>>>>>> media-ctl -f '"OMAP3 ISP CCDC":1 [SGRBG10 2592x1944]' > >>>>>>>> media-ctl -f '"OMAP3 ISP preview":0 [SGRBG10 2592x1943]' > >>>>>>>> media-ctl -f '"OMAP3 ISP resizer":0 [YUYV 2574x1935]' > >>>>>>>> media-ctl -f '"OMAP3 ISP resizer":1 [YUYV 642x483]' > >>>>>>>> > >>>>>>>> The full media-ctl dump is at > >>>>>>>> http://www.mlbassoc.com/misc/pipeline.out > >>>>>>>> > >>>>>>>> When I try to grab from /dev/video6 (output node of resizer), I > >>>>>>>> see only previewer interrupts, no resizer interrrupts. I added a > >>>>>>>> simple printk at each of the previewer/resizer *_isr functions, > >>>>>>>> and I only > >>>>>>>> > >>>>>>>> ever see this one: > >>>>>>>> omap3isp_preview_isr_frame_sync.1373 > >>>>>>>> > >>>>>>>> Can you give me an overview of what events/interrupts should occur > >>>>>>>> so I can try to trace through the ISP to see where it is failing? > >>>>>>> > >>>>>>> The CCDC generates VD0, VD1 and HS/VS interrupts regardless of > >>>>>>> whether it processes video or not, as long as it receives a video > >>>>>>> stream at its input. The preview engine and resizer will only > >>>>>>> generate an interrupt after writing an image to memory. With your > >>>>>>> above > >>>>>>> configuration VD0, VD1, HS/VS and resizer interrupts should be > >>>>>>> generated. > >>>>>>> > >>>>>>> Your pipeline configuration looks correct, except that the > >>>>>>> downscaling factor is slightly larger than 4. Could you try to > >>>>>>> setup the resizer to output a 2574x1935 image instead of 642x483 ? > >>>>>>> If that works, try to downscale to 660x496. If that works as well, > >>>>>>> the driver should be fixed to disallow resolutions that won't > >>>>>>> work. > >>>>>> > >>>>>> No change. I also tried using only the previewer like this: > >>>>>> media-ctl -r > >>>>>> media-ctl -l '"mt9p031 3-005d":0->"OMAP3 ISP CCDC":0[1]' > >>>>>> media-ctl -l '"OMAP3 ISP CCDC":2->"OMAP3 ISP preview":0[1]' > >>>>>> media-ctl -l '"OMAP3 ISP preview":1->"OMAP3 ISP preview > >>>>>> output":0[1]' media-ctl -f '"mt9p031 3-005d":0[SGRBG12 > >>>>>> 2592x1944]' media-ctl -f '"OMAP3 ISP CCDC":0 [SGRBG12 > >>>>>> 2592x1944]' > >>>>>> media-ctl -f '"OMAP3 ISP CCDC":1 [SGRBG10 2592x1944]' > >>>>>> media-ctl -f '"OMAP3 ISP preview":0 [SGRBG10 2592x1943]' > >>>>>> media-ctl -f '"OMAP3 ISP preview":1 [YUYV 2574x1935]' > >>>>>> > >>>>>> yavta --capture=4 -f YUYV -s 2574x1935 -F /dev/video4 > >>>>>> > >>>>>> I still only get the frame sync interrupts in the previewer, no > >>>>>> buffer interrupts, hence no data flowing to my application. What > >>>>>> else can I look at? > >>>>> > >>>>> Do you get VD0 and VD1 interrupts ? > >>>> > >>>> Yes, the CCDC is working correctly, but nothing moves through the > >>>> previewer. Here's a trace of the interrupt sequence I get, repeated > >>>> over and over. These are printed as __FUNCTION__.__LINE__ > >>>> --- ccdc_vd0_isr.1615 > >>>> --- ccdc_hs_vs_isr.1482 > >>>> --- ccdc_vd1_isr.1664 > >>>> --- omap3isp_preview_isr_frame_sync.1373 > >>>> > >>>> What's the best tree to try this against? 3.2-rc2 doesn't have the > >>>> BT656 stuff in it yet, so I've been still using my older tree (3.0.0 + > >>>> drivers/media from your tree) > >>> > >>> I thought you were using an MT9P031 ? That doesn't require BT656 > >>> support. > >> > >> True, but I have one board that supports either sensor and I want to > >> stay with one source tree. > > > > Sure, but let's start with a non-BT656 tree to rule out issues caused by > > BT656 patches. Could you please try mainline v3.1 ? > > This sort of works(*), but I'm still having issues (at least I can move > frames!) When I configure the pipeline like this: > media-ctl -r > media-ctl -l '"mt9p031 3-005d":0->"OMAP3 ISP CCDC":0[1]' > media-ctl -l '"OMAP3 ISP CCDC":2->"OMAP3 ISP preview":0[1]' > media-ctl -l '"OMAP3 ISP preview":1->"OMAP3 ISP resizer":0[1]' > media-ctl -l '"OMAP3 ISP resizer":1->"OMAP3 ISP resizer output":0[1]' > media-ctl -f '"mt9p031 3-005d":0[SGRBG12 2592x1944]' > media-ctl -f '"OMAP3 ISP CCDC":0 [SGRBG12 2592x1944]' > media-ctl -f '"OMAP3 ISP CCDC":1 [SGRBG10 2592x1944]' > media-ctl -f '"OMAP3 ISP preview":0 [SGRBG10 2592x1943]' > media-ctl -f '"OMAP3 ISP resizer":0 [YUYV 2574x1935]' > media-ctl -f '"OMAP3 ISP resizer":1 [YUYV 660x496]' > the resulting frames are 666624 bytes each instead of 654720 > > When I tried to grab from the previewer, the frames were 9969120 instead of > 9961380 > > Any ideas what resolution is actually being moved through?
Because the OMAP3 ISP has alignment requirements. Both the preview engine and the resizer output line lenghts must be multiple of 32 bytes. The driver adds padding at end of lines when the output width isn't a multiple of 16 pixels. So this means that your original problem comes from the BT656 patches. > (*) to build on v3.1, I had to manually add the mt9p031 driver and fix a > compile error in drivers/media/video/omap/omap_vout.c I'm surprised that omap_vout doesn't compile on v3.1. What was the error ? -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
