On 09-12-2011 08:46, Mauro Carvalho Chehab wrote:
On 09-12-2011 07:35, Eddi De Pieri wrote:
Hi Mauro,
drxk driver seems to have 2 issue with w_scan:
- dvb-t tune error while scanning ("solved" by forcing w_scan to open
dvb-t fe without autoscan)
- dvb-t scan fail
so... we should have an issue that when the driver release dvb-c
adapter drxk (or xc5000?) stay in dvb-c mode
Can you check if you can replicate my error and if Terratec H5 have same issue?
follow the test:....
I build w_scan 20111011 like you
-unplug tuner
-replug tuner
dmesg says:
[ 1030.370462] DVB: registering new adapter (em28xx #0)
[ 1030.370470] DVB: registering adapter 0 frontend 0 (DRXK DVB-C)...
[ 1030.370689] DVB: registering adapter 0 frontend 1 (DRXK DVB-T)...
[ 1030.371393] em28xx #0: Successfully loaded em28xx-dvb
- w_scan -a /dev/dvb/adapter0/frontend1 (the autodetect of adapter is disabled)
dmesg says:
[ 1117.000725] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
[ 1117.005404] xc5000: firmware read 12401 bytes.
[ 1117.005410] xc5000: firmware uploading...
[ 1117.416085] xc5000: firmware upload complete...
However, like Fedrik, I don't get errors on dmesg but w_scan ends with
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!
- w_scan -a /dev/dvb/adapter0/frontend1 -I it-All
no error on dmesg...
- w_scan -f t -c IT
Leaving autodetect turned on I get
[ 794.964818] drxk: Error -22 on QAMSetSymbolrate
[ 794.964827] drxk: Error -22 on SetQAM
[ 794.964832] drxk: Error -22 on Start
[ 795.164518] drxk: Error -22 on QAMSetSymbolrate
[ 795.164528] drxk: Error -22 on SetQAM
[ 795.164534] drxk: Error -22 on Start
That's weird... SetQAM and QAMSetSymbolrate are only called for DVB-C.
From DRX-K driver, the only way to get EINVAL on QAMSetSymbolrate is when
there would be a division by zero, e. g. symbol rate = 0 or frequency equal to
0.
Did a quick test here with HVR-930C, using strace:
open("/dev/dvb/adapter0/frontend0", O_RDWR|O_NONBLOCK) = 3
ioctl(3, FE_GET_INFO, 0x635120) = 0
write(2, "\t/dev/dvb/adapter0/frontend0 -> "..., 92 /dev/dvb/adapter0/frontend0 -> DVB-C
"DRXK DVB-C": specified was DVB-T -> SEARCH NEXT ONE.
) = 92
close(3) = 0
open("/dev/dvb/adapter0/frontend1", O_RDWR|O_NONBLOCK) = 3
ioctl(3, FE_GET_INFO, 0x635120) = 0
write(2, "\t/dev/dvb/adapter0/frontend1 -> "..., 52 /dev/dvb/adapter0/frontend1 -> DVB-T
"DRXK DVB-T": ) = 52
write(2, "good :-)\n", 9good :-)
) = 9
close(3) = 0
...
open("/dev/dvb/adapter0/frontend1", O_RDWR) = 3
write(2, "-_-_-_-_ Getting frontend capabi"..., 48-_-_-_-_ Getting frontend
capabilities-_-_-_-_
) = 48
ioctl(3, FE_GET_INFO, 0x635120) = 0
ioctl(3, FE_GET_PROPERTY, 0x7fff81f5de70) = 0
...
ioctl(3, FE_SET_PROPERTY, 0x7fff81f5de60) = 0
So far so good, but then drxk tries to use DVB-C, instead of DVB-T:
[ 717.260140] drxk: Error -22 on SetQAM
[ 717.263858] drxk: Error -22 on Start
It seems that there's a bug at the dvb-t on the current version.
I'll try to fix it.
I got it. What happens is that, drx-k is changing the DVB type at the frontend
init, and not when FE_SET_PROPERTY is called. This causes issues with tools
like w_scan that opens both devices.
The enclosed patch should fix it. I can't actually test DVB-T here, but
w_scan is properly switching from/to DVB-T/DVB-C now:
$ dmesg|grep SetO|grep DVB
[ 5003.825868] drxk: SetOperationMode: DVB-C Annex C
[ 5004.944909] drxk: SetOperationMode: DVB-T
[ 5054.158016] drxk: SetOperationMode: DVB-C Annex C
[ 5073.899228] drxk: SetOperationMode: DVB-T
-
[media] drxk: Switch the delivery system on FE_SET_PROPERTY
The DRX-K doesn't change the delivery system at set_properties,
but do it at frontend init. This causes problems on programs like
w_scan that, by default, opens both frontends.
Instead, explicitly set the format when set_parameters callback is
called.
Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
diff --git a/drivers/media/dvb/frontends/drxk_hard.c
b/drivers/media/dvb/frontends/drxk_hard.c
index 95cbc98..c8e0921 100644
--- a/drivers/media/dvb/frontends/drxk_hard.c
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -1847,6 +1847,7 @@ static int SetOperationMode(struct drxk_state *state,
*/
switch (oMode) {
case OM_DVBT:
+ dprintk(1, ": DVB-T\n");
state->m_OperationMode = oMode;
status = SetDVBTStandard(state, oMode);
if (status < 0)
@@ -1854,6 +1855,8 @@ static int SetOperationMode(struct drxk_state *state,
break;
case OM_QAM_ITU_A: /* fallthrough */
case OM_QAM_ITU_C:
+ dprintk(1, ": DVB-C Annex %c\n",
+ (state->m_OperationMode == OM_QAM_ITU_A) ? 'A' : 'C');
state->m_OperationMode = oMode;
status = SetQAMStandard(state, oMode);
if (status < 0)
@@ -6183,7 +6186,10 @@ static int drxk_c_init(struct dvb_frontend *fe)
dprintk(1, "\n");
if (mutex_trylock(&state->ctlock) == 0)
return -EBUSY;
- SetOperationMode(state, OM_QAM_ITU_A);
+ if (state->m_itut_annex_c)
+ SetOperationMode(state, OM_QAM_ITU_C);
+ else
+ SetOperationMode(state, OM_QAM_ITU_A);
return 0;
}
@@ -6219,14 +6225,6 @@ static int drxk_set_parameters(struct dvb_frontend *fe,
return -EINVAL;
}
- if (state->m_OperationMode == OM_QAM_ITU_A ||
- state->m_OperationMode == OM_QAM_ITU_C) {
- if (fe->dtv_property_cache.rolloff == ROLLOFF_13)
- state->m_OperationMode = OM_QAM_ITU_C;
- else
- state->m_OperationMode = OM_QAM_ITU_A;
- }
-
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (fe->ops.tuner_ops.set_params)
@@ -6235,6 +6233,22 @@ static int drxk_set_parameters(struct dvb_frontend *fe,
fe->ops.i2c_gate_ctrl(fe, 0);
state->param = *p;
fe->ops.tuner_ops.get_if_frequency(fe, &IF);
+
+ /*
+ * Make sure that the frontend is on the right state
+ */
+
+ if (fe->ops.info.type == FE_QAM) {
+ if (fe->dtv_property_cache.rolloff == ROLLOFF_13) {
+ state->m_itut_annex_c = true;
+ SetOperationMode(state, OM_QAM_ITU_C);
+ } else {
+ state->m_itut_annex_c = false;
+ SetOperationMode(state, OM_QAM_ITU_A);
+ }
+ } else
+ SetOperationMode(state, OM_DVBT);
+
Start(state, 0, IF);
/* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */
diff --git a/drivers/media/dvb/frontends/drxk_hard.h
b/drivers/media/dvb/frontends/drxk_hard.h
index a05c32e..85a423f 100644
--- a/drivers/media/dvb/frontends/drxk_hard.h
+++ b/drivers/media/dvb/frontends/drxk_hard.h
@@ -263,6 +263,8 @@ struct drxk_state {
u8 m_TSDataStrength;
u8 m_TSClockkStrength;
+ bool m_itut_annex_c; /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */
+
enum DRXMPEGStrWidth_t m_widthSTR; /**< MPEG start width */
u32 m_mpegTsStaticBitrate; /**< Maximum bitrate in b/s in
case
static clockrate is
selected */
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
