Hi Martin,
On 12/14/11 03:25, Martin Hostettler wrote:
> Adds board support for an MT9M032 based camera to omap3evm.
>
> Signed-off-by: Martin Hostettler <mar...@neutronstar.dyndns.org>
> ---
> arch/arm/mach-omap2/Makefile | 3 +-
> arch/arm/mach-omap2/board-omap3evm-camera.c | 155
> +++++++++++++++++++++++++++
> arch/arm/mach-omap2/board-omap3evm.c | 4 +
> 3 files changed, 161 insertions(+), 1 deletions(-)
> create mode 100644 arch/arm/mach-omap2/board-omap3evm-camera.c
>
> Changes in V3
> * Added missing copyright and attribution.
> * switched to gpio_request_array for gpio init.
> * removed device_initcall and added call to omap3_evm_camera_init into
> omap3_evm_init
>
> Changes in V2:
> * ported to current mainline
> * Style fixes
> * Fix error handling
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index b009f17..6045789 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -196,7 +196,8 @@ obj-$(CONFIG_MACH_OMAP3530_LV_SOM) +=
> board-omap3logic.o
> obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
> obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
> obj-$(CONFIG_MACH_OVERO) += board-overo.o
> -obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
> +obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
> + board-omap3evm-camera.o
> obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
> obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
> obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
> diff --git a/arch/arm/mach-omap2/board-omap3evm-camera.c
> b/arch/arm/mach-omap2/board-omap3evm-camera.c
> new file mode 100644
> index 0000000..bffd5b8
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-omap3evm-camera.c
> @@ -0,0 +1,155 @@
> +/*
> + * Copyright (C) 2011 Texas Instruments Inc
> + * Copyright (C) 2010-2011 Lund Engineering
> + * Contact: Gil Lund <gwl...@lundeng.com>
> + * Authors:
> + * Vaibhav Hiremath <hvaib...@ti.com>
> + * Martin Hostettler <mar...@neutronstar.dyndns.org>
> + *
> + * Board intregration for a MT9M032 camera connected to IMAGE_CONN and I2C
> Bus 2
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/gpio.h>
> +#include <plat/mux.h>
> +#include "mux.h"
> +
> +#include "../../../drivers/media/video/omap3isp/isp.h"
Laurent,
In one of the previous reviews, you stated:
"I'll probably split it and move the part required by board files to
include/media/omap3isp.h".
Is there any progress on that?
> +#include "media/mt9m032.h"
> +
> +#include "devices.h"
> +
> +#define EVM_TWL_GPIO_BASE OMAP_MAX_GPIO_LINES
> +#define GPIO98_VID_DEC_RES 98
> +#define nCAM_VD_SEL 157
> +
> +#define MT9M032_I2C_BUS_NUM 2
> +
> +
> +enum omap3evmdc_mux {
> + MUX_TVP5146,
> + MUX_CAMERA_SENSOR,
> + MUX_EXP_CAMERA_SENSOR,
> +};
> +
> +/**
> + * omap3evm_set_mux - Sets mux to enable signal routing to
> + * different peripherals present on new EVM board
> + * @mux_id: enum, mux id to enable
> + *
> + * Returns 0 for success or a negative error code
> + */
> +static int omap3evm_set_mux(enum omap3evmdc_mux mux_id)
> +{
> + /* Set GPIO6 = 1 */
> + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 6, 1);
> + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 0);
> +
> + switch (mux_id) {
> + case MUX_TVP5146:
> + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 0);
> + gpio_set_value(nCAM_VD_SEL, 1);
> + break;
> +
> + case MUX_CAMERA_SENSOR:
> + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 0);
> + gpio_set_value(nCAM_VD_SEL, 0);
> + break;
> +
> + case MUX_EXP_CAMERA_SENSOR:
> + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 1);
> + break;
> +
> + default:
> + pr_err("omap3evm-camera: Invalid mux id #%d\n", mux_id);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
I don't really care about that, but I don't see any mux
being set in the above function so the name and comments
are misleading.
> +
> +static struct mt9m032_platform_data mt9m032_platform_data = {
> + .ext_clock = 13500000,
> + .pll_pre_div = 6,
> + .pll_mul = 120,
> + .pll_out_div = 5,
> + .invert_pixclock = 1,
> +};
> +
> +static struct i2c_board_info camera_i2c_devices[] = {
> + {
> + I2C_BOARD_INFO(MT9M032_NAME, MT9M032_I2C_ADDR),
> + .platform_data = &mt9m032_platform_data,
> + },
> +};
> +
> +static struct isp_subdev_i2c_board_info camera_i2c_subdevs[] = {
> + {
> + .board_info = &camera_i2c_devices[0],
> + .i2c_adapter_id = MT9M032_I2C_BUS_NUM,
> + },
> + {},
> +};
> +
> +static struct isp_v4l2_subdevs_group camera_subdevs[] = {
> + {
> + .subdevs = camera_i2c_subdevs,
> + .interface = ISP_INTERFACE_PARALLEL,
> + .bus = {
> + .parallel = {
> + .data_lane_shift = 1,
> + .clk_pol = 0,
> + .bridge = ISPCTRL_PAR_BRIDGE_DISABLE,
> + }
> + },
> + },
> + {},
> +};
> +
> +static struct isp_platform_data isp_platform_data = {
> + .subdevs = camera_subdevs,
> +};
> +
> +
> +static struct gpio setup_gpios[] = {
> + { nCAM_VD_SEL, GPIOF_OUT_INIT_HIGH, "nCAM_VD_SEL" },
> + { EVM_TWL_GPIO_BASE + 2, GPIOF_OUT_INIT_LOW, "T2_GPIO2" },
> + { EVM_TWL_GPIO_BASE + 8, GPIOF_OUT_INIT_LOW, "nCAM_VD_EN" },
> +};
> +
> +
> +int __init omap3_evm_camera_init(void)
> +{
> + int ret = -EINVAL;
No need to initialize the variable, as it is done three line below.
> +
> + omap_mux_init_gpio(nCAM_VD_SEL, OMAP_PIN_OUTPUT);
> + ret = gpio_request_array(setup_gpios, ARRAY_SIZE(setup_gpios));
> + if (ret < 0) {
> + pr_err("omap3evm-camera: Failed to setup camera signal
> routing.\n");
> + return ret;
> + }
It looks like both above calls (gpio_request and mux_init)
can be moved to omap3evm_set_mux() function (or a renamed version of it),
so all the GPIO stuff will be close to each other instead of requesting
in one place and playing with values in another...
> + omap3evm_set_mux(MUX_CAMERA_SENSOR);
So the plan is to add support for the 3 types,
but hard code to only one?
Can't this be runtime detected somehow?
> + ret = omap3_init_camera(&isp_platform_data);
> + if (ret < 0) {
> + gpio_free_array(setup_gpios, ARRAY_SIZE(setup_gpios));
> + return ret;
> + }
> + return 0;
> +}
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c
> b/arch/arm/mach-omap2/board-omap3evm.c
> index ec00b2e..1b50539 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -617,6 +617,8 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = {
> { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" },
> };
>
> +int omap3_evm_camera_init(void);
> +
> static void __init omap3_evm_init(void)
> {
> omap3_evm_get_revision();
> @@ -672,6 +674,8 @@ static void __init omap3_evm_init(void)
> pr_err("error setting wl12xx data\n");
> platform_device_register(&omap3evm_wlan_regulator);
> #endif
> +
> + omap3_evm_camera_init();
> }
>
> MACHINE_START(OMAP3EVM, "OMAP3 EVM")
--
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
