Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.
Also, fill the supported delivery systems at dvb_frontend_ops
struct.
Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
---
drivers/media/dvb/frontends/nxt200x.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/media/dvb/frontends/nxt200x.c
b/drivers/media/dvb/frontends/nxt200x.c
index efb8e46..b541614 100644
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -528,9 +528,9 @@ static int nxt2004_load_firmware (struct dvb_frontend* fe,
const struct firmware
return 0;
};
-static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
- struct dvb_frontend_parameters *p)
+static int nxt200x_setup_frontend_parameters(struct dvb_frontend *fe)
{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct nxt200x_state* state = fe->demodulator_priv;
u8 buf[5];
@@ -546,7 +546,7 @@ static int nxt200x_setup_frontend_parameters (struct
dvb_frontend* fe,
}
/* set additional params */
- switch (p->u.vsb.modulation) {
+ switch (p->modulation) {
case QAM_64:
case QAM_256:
/* Set punctured clock for QAM */
@@ -576,7 +576,7 @@ static int nxt200x_setup_frontend_parameters (struct
dvb_frontend* fe,
nxt200x_agc_reset(state);
/* set target power level */
- switch (p->u.vsb.modulation) {
+ switch (p->modulation) {
case QAM_64:
case QAM_256:
buf[0] = 0x74;
@@ -620,7 +620,7 @@ static int nxt200x_setup_frontend_parameters (struct
dvb_frontend* fe,
}
/* write sdmx input */
- switch (p->u.vsb.modulation) {
+ switch (p->modulation) {
case QAM_64:
buf[0] = 0x68;
break;
@@ -714,7 +714,7 @@ static int nxt200x_setup_frontend_parameters (struct
dvb_frontend* fe,
}
/* write agc ucgp0 */
- switch (p->u.vsb.modulation) {
+ switch (p->modulation) {
case QAM_64:
buf[0] = 0x02;
break;
@@ -1203,7 +1203,7 @@ error:
}
static struct dvb_frontend_ops nxt200x_ops = {
-
+ .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
.info = {
.name = "Nextwave NXT200X VSB/QAM frontend",
.type = FE_ATSC,
@@ -1220,7 +1220,7 @@ static struct dvb_frontend_ops nxt200x_ops = {
.init = nxt200x_init,
.sleep = nxt200x_sleep,
- .set_frontend_legacy = nxt200x_setup_frontend_parameters,
+ .set_frontend = nxt200x_setup_frontend_parameters,
.get_tune_settings = nxt200x_get_tune_settings,
.read_status = nxt200x_read_status,
--
1.7.8.352.g876a6
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
