On Sun, 2012-01-15 at 17:02 +0000, razza lists wrote: > On 15 January 2012 16:22, Gianluca Gennari <gennar...@gmail.com> wrote: > > Il 15/01/2012 16:04, razza lists ha scritto: > >> On 15 January 2012 14:24, Mauro Carvalho Chehab <mche...@redhat.com> wrote: > >>> Em 15-01-2012 09:51, Gianluca Gennari escreveu: > >>>> Il 15/01/2012 12:35, razza lists ha scritto: > >>>>> On Sat, Jan 14, 2012 at 11:44 PM, Gianluca Gennari > >>>>> <gennar...@gmail.com> wrote: > >>>>>> > >>>>>> Il 15/01/2012 00:41, RazzaList ha scritto: > >>>>>>> I have followed the build instructions for the Hauppauge MyTV.t > >>>>>>> device here > >>>>>>> - http://linuxtv.org/wiki/index.php/Hauppauge_myTV.t and built the > >>>>>>> drivers > >>>>>>> as detailed here - > >>>>>>> http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_D > >>>>>>> evice_Drivers on a CentOS 6.2 i386 build. > >>>>>>> > >>>>>>> When I use dvbscan, nothing happens. dmesg shows " > >>>>>>> dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to > >>>>>>> delivery system 0" > >>>>>>> > >>>>>>> [root@cos6 ~]# cd /usr/bin > >>>>>>> [root@cos6 bin]# ./dvbscan /usr/share/dvb/dvb-t/uk-Hannington > > >>>>>>> /usr/share/dvb/dvb-t/channels.conf > >>>>>>> [root@cos6 bin]# dmesg | grep dvb > >>>>>>> dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state. > >>>>>>> dvb-usb: will pass the complete MPEG2 transport stream to the software > >>>>>>> demuxer. > >>>>>>> dvb-usb: schedule remote query interval to 50 msecs. > >>>>>>> dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and > >>>>>>> connected. > >>>>>>> usbcore: registered new interface driver dvb_usb_dib0700 > >>>>>>> dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to > >>>>>>> delivery system 0 > >>>>>>> > >>>>>>> I have searched but can't locate a fix. Any pointers? > >>>>>>> > >>>>>>> > >>>>>>> -- > >>>>>>> To unsubscribe from this list: send the line "unsubscribe > >>>>>>> linux-media" in > >>>>>>> the body of a message to majord...@vger.kernel.org > >>>>>>> More majordomo info at �http://vger.kernel.org/majordomo-info.html > >>>>>>> > >>>>>> > >>>>>> Hi, > >>>>>> this patch will likely fix your problem: > >>>>>> > >>>>>> http://patchwork.linuxtv.org/patch/9492/ > >>>>>> > >>>>>> Best regards, > >>>>>> Gianluca > >>>>> > >>>>> It's very likely the case I'm doing something wrong and I apologise in > >>>>> advance! However some help/guidance would be great... > >>>>> > >>>>> I have downloaded the sources as described in the basic approach here > >>>>> - > >>>>> http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers > >>>>> > >>>>> In the source there is no file called "dvb_frontend.c", so I assume I > >>>>> start the media_build/build script? > >>>>> If I do, eventually this creates > >>>>> media_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.c > >>>>> > >>>>> I then apply the patch to > >>>>> media_build/linux/drivers/media/dvb/dvb-core/dvb_frontend.c, and I can > >>>>> see the added elements... > >>>>> .... > >>>>> static int dvb_frontend_clear_cache(struct dvb_frontend *fe) > >>>>> { > >>>>> struct dtv_frontend_properties *c = &fe->dtv_property_cache; > >>>>> int i; > >>>>> u32 delsys; > >>>>> > >>>>> delsys = c->delivery_system; > >>>>> memset(c, 0, sizeof(struct dtv_frontend_properties)); > >>>>> c->delivery_system = delsys; > >>>>> > >>>>> c->state = DTV_CLEAR; > >>>>> > >>>>> dprintk("%s() Clearing cache for delivery system %d\n", > >>>>> __func__, > >>>>> c->delivery_system); > >>>>> ................ > >>>>> > >>>>> After a reboot (as I have not got a clue about unloading modules etc.) > >>>>> I then execute make install but I still get the same error > >>>>> "dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to > >>>>> delivery system 0" when I use dvbscan. > >>>>> > >>>> > >>>> You are almost there. > >>>> After you apply the patch, you have to recompile the entire source tree. > >>>> You can do it launching the "make" command inside the linux/ folder. > >>>> Then reinstall the drivers giving "make install" from the media_build/ > >>>> folder, and reboot. > >>> > >>> I've added the fixes for it today. So, tomorrow's tarballs should have > >>> this > >>> bug fixed. > >>> > >>>> > >>>> Best regards, > >>>> Gianluca > >>>> -- > >>>> To unsubscribe from this list: send the line "unsubscribe linux-media" in > >>>> the body of a message to majord...@vger.kernel.org > >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html > >>> > >> I'm glad about that as I am getting nowhere fast. Looks like it's > >> better to rebuild the box in the week and save wasting your time. > >> After patching etc, I did manage to get a little bit further, but when > >> using dvbscan I got an error: > >> > >> [root@cos6 bin]# dvbscan /usr/share/dvb/dvb-t/uk-Hannington > > >> /home/mythtv/channels.conf > >> Unable to query frontend status > > > > According to the dvbscan wiki page: > > > > http://linuxtv.org/wiki/index.php/Dvbscan > > > > if you get this error you should try other scanning utilities, like scan > > or w_scan. You can also try a real application, like Kaffeine. > > > > Best regards, > > Gianluca > > > >> > >> Dmesg output: > >> usb 1-3: new high speed USB device using ehci_hcd and address 2 > >> usb 1-3: New USB device found, idVendor=2040, idProduct=7080 > >> usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > >> usb 1-3: Product: myTV.t > >> usb 1-3: Manufacturer: Eskape Labs > >> usb 1-3: SerialNumber: 4030928317 > >> usb 1-3: configuration #1 chosen from 1 choice > >> WARNING: You are using an experimental version of the media stack. > >> As the driver is backported to an older kernel, it doesn't offer > >> enough quality for its usage in production. > >> Use it with care. > >> Latest git patches (needed if you report a bug to > >> linux-media@vger.kernel.org): > >> 240ab508aa9fb7a294b0ecb563b19ead000b2463 [media] [PATCH] don't reset > >> the delivery system on DTV_CLEAR > >> 9544e8a64795d75875ff4c680a43aa452a37b260 [media] [BUG] it913x-fe fix > >> typo error making SNR levels unstable > >> c147f61083e3e4a9c2aaecaaed976502defc3b7d [media] cx23885: Query the > >> CX25840 during enum_input for status > >> WARNING: You are using an experimental version of the media stack. > >> As the driver is backported to an older kernel, it doesn't offer > >> enough quality for its usage in production. > >> Use it with care. > >> Latest git patches (needed if you report a bug to > >> linux-media@vger.kernel.org): > >> 240ab508aa9fb7a294b0ecb563b19ead000b2463 [media] [PATCH] don't reset > >> the delivery system on DTV_CLEAR > >> 9544e8a64795d75875ff4c680a43aa452a37b260 [media] [BUG] it913x-fe fix > >> typo error making SNR levels unstable > >> c147f61083e3e4a9c2aaecaaed976502defc3b7d [media] cx23885: Query the > >> CX25840 during enum_input for status > >> IR NEC protocol handler initialized > >> IR RC5(x) protocol handler initialized > >> IR RC6 protocol handler initialized > >> IR JVC protocol handler initialized > >> IR Sony protocol handler initialized > >> IR SANYO protocol handler initialized > >> IR MCE Keyboard/mouse protocol handler initialized > >> dib0700: loaded with support for 24 different device-types > >> dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in cold state, will try to > >> load a firmware > >> usb 1-3: firmware: requesting dvb-usb-dib0700-1.20.fw > >> lirc_dev: IR Remote Control driver registered, major 248 > >> IR LIRC bridge handler initialized > >> dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' > >> dib0700: firmware started successfully. > >> dvb-usb: found a 'Hauppauge Nova-T MyTV.t' in warm state. > >> dvb-usb: will pass the complete MPEG2 transport stream to the software > >> demuxer. > >> DVB: registering new adapter (Hauppauge Nova-T MyTV.t) > >> DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... > >> DiB0070: successfully identified > >> dvb-usb: Hauppauge Nova-T MyTV.t successfully initialized and connected. > >> usbcore: registered new interface driver dvb_usb_dib0700 > >> > > I could never get DiBcom 7000PC to work properly, there is something not right with the AGC settings. I needed an attenuator on Mendip UK before the transmitters power increased, now I can't get it work at all.
Legacy applications/utils tested so far with 3.2/next on DVB-T on other adapters. scan okay use -5 option increases time out helps w_scan okay use -F option increases time out helps dvbscan fail Unable to query frontend status me-tv okay kaffeine okay VLC okay mplayer dvb:// okay VDR okay mumudvb okay zap okay -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
