On 02/22/2012 11:21 PM, Hans-Frieder Vogt wrote:
> Support for the tuner Fitipower FC0012
>
> Signed-off-by: Hans-Frieder Vogt <hfv...@gmx.net>
>
> diff -Nupr a/drivers/media/common/tuners/fc0012.c
> b/drivers/media/common/tuners/fc0012.c
> --- a/drivers/media/common/tuners/fc0012.c 1970-01-01 01:00:00.000000000
> +0100
> +++ b/drivers/media/common/tuners/fc0012.c 2012-02-19 17:37:27.364482154
> +0100
> @@ -0,0 +1,430 @@
> +/*
> + * Fitipower FC0012 tuner driver
> + *
> + * Copyright (C) 2012 Hans-Frieder Vogt <hfv...@gmx.net>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/version.h>
> +#include "fc0012.h"
> +#include "fc0012-priv.h"
> +
> +static int fc0012_debug;
> +module_param_named(debug, fc0012_debug, int, 0644);
> +MODULE_PARM_DESC(debug, "Select debug level (default: debug off)");
> +
> +/* the FC0012 seems to have only byte access to the registers */
> +static int fc0012_writeregs(struct fc0012_priv *priv, u8 reg, u8 *val, int
> len)
> +{
> + u8 buf[1+len];
> + struct i2c_msg msg = { .addr = priv->addr,
> + .flags = 0, .buf = buf, .len = sizeof(buf) };
> +
> + buf[0] = reg;
> + memcpy(&buf[1], val, len);
> +
> + msleep(1);
> + if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
> + err("I2C write regs failed, reg: %02x, val[0]: %02x",
> + reg, val[0]);
> + return -EREMOTEIO;
> + }
> + return 0;
> +}
> +
> +static int fc0012_writereg(struct fc0012_priv *priv, u8 reg, u8 val)
> +{
> + u8 buf[2] = {reg, val};
> + struct i2c_msg msg = { .addr = priv->addr,
> + .flags = 0, .buf = buf, .len = 2 };
> +
> + msleep(1);
> + if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
> + err("I2C write reg failed, reg: %02x, val: %02x", reg, val);
> + return -EREMOTEIO;
> + }
> + return 0;
> +}
> +
> +static int fc0012_readreg(struct fc0012_priv *priv, u8 reg, u8 *val)
> +{
> + struct i2c_msg msg[2] = {
> + { .addr = priv->addr,
> + .flags = 0, .buf = ®, .len = 1 },
> + { .addr = priv->addr,
> + .flags = I2C_M_RD, .buf = val, .len = 1 },
> + };
> +
> + if (i2c_transfer(priv->i2c, msg, 2) != 2) {
> + err("I2C read failed, reg: %02x", reg);
> + return -EREMOTEIO;
> + }
> + return 0;
> +}
> +
> +static int fc0012_release(struct dvb_frontend *fe)
> +{
> + kfree(fe->tuner_priv);
> + fe->tuner_priv = NULL;
> + return 0;
> +}
> +
> +static int fc0012_init(struct dvb_frontend *fe)
> +{
> + struct fc0012_priv *priv = fe->tuner_priv;
> + int ret = 0;
> + u8 i;
> + unsigned char reg[] = {
> + 0x00, /* dummy reg. 0 */
> + 0x05, /* reg. 0x01 */
> + 0x10, /* reg. 0x02 */
> + 0x00, /* reg. 0x03 */
> + 0x00, /* reg. 0x04 */
> + 0x0a, /* reg. 0x05 CHECK: correct? */
> + 0x00, /* reg. 0x06: divider 2, VCO slow */
> + 0x0f, /* reg. 0x07 */
> + 0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
> Loop Bw
> 1/8 */
> + 0x6e, /* reg. 0x09: Disable LoopThrough */
> + 0xb8, /* reg. 0x0a: Disable LO Test Buffer */
> + 0x83, /* reg. 0x0b: Output Clock is same as clock frequency */
> + 0xfe, /* reg. 0x0c: depending on AGC Up-Down mode, may need
> 0xf8 */
> + 0x02, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for
> DVB-T */
> + 0x00, /* reg. 0x0e */
> + 0x00, /* reg. 0x0f */
> + 0x0d, /* reg. 0x10 */
> + 0x00, /* reg. 0x11 */
> + 0x1f, /* reg. 0x12: Set to maximum gain */
> + 0x90, /* reg. 0x13: Enable IX2, Set to Middle Gain: 0x08, Low
> Gain:
> 0x00, High Gain: 0x10 */
> + 0x00, /* reg. 0x14 */
> + 0x04, /* reg. 0x15: Enable LNA COMPS */
> + };
> +
> + switch (priv->xtal_freq) {
> + case FC_XTAL_27_MHZ:
> + case FC_XTAL_28_8_MHZ:
> + reg[0x07] |= 0x20;
> + break;
> + case FC_XTAL_36_MHZ:
> + default:
> + break;
> + }
> + for (i = 1; i < sizeof(reg); i++) {
> + ret = fc0012_writereg(priv, i, reg[i]);
> + if (ret)
> + break;
> + }
> +
> + if (ret)
> + deb_info("%s: failed:%d\n", __func__, ret);
> +
> + return ret;
> +}
> +
> +static int fc0012_sleep(struct dvb_frontend *fe)
> +{
> + /* nothing to do here */
> + return 0;
> +}
> +
> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)
> +static int fc0012_set_params(struct dvb_frontend *fe)
> +#else
> +static int fc0012_set_params(struct dvb_frontend *fe,
> + struct dvb_frontend_parameters *params)
> +#endif
> +{
> + struct fc0012_priv *priv = fe->tuner_priv;
> + int ret;
> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)
> + struct dtv_frontend_properties *p = &fe->dtv_property_cache;
> + u32 freq = p->frequency / 1000;
> + u32 delsys = p->delivery_system;
> +#else
> + u32 freq = params->frequency / 1000;
> + u32 bw = 0;
> +#endif
> + unsigned char reg[0x16], am, pm, multi;
> + unsigned long fVCO;
> + unsigned short xtal_freq_khz_2, xin, xdiv;
> + int vco_select = false;
> +
> + switch (priv->xtal_freq) {
> + case FC_XTAL_27_MHZ:
> + xtal_freq_khz_2 = 27000 / 2;
> + break;
> + case FC_XTAL_36_MHZ:
> + xtal_freq_khz_2 = 36000 / 2;
> + break;
> + case FC_XTAL_28_8_MHZ:
> + default:
> + xtal_freq_khz_2 = 28800 / 2;
> + break;
> + }
> +
> + /* select frequency divider and the frequency of VCO */
> + if (freq * 96 < 3560000) {
> + multi = 96;
> + reg[5] = 0x82;
> + reg[6] = 0x00;
> + } else if (freq * 64 < 3560000) {
> + multi = 64;
> + reg[5] = 0x82;
> + reg[6] = 0x02;
> + } else if (freq * 48 < 3560000) {
> + multi = 48;
> + reg[5] = 0x42;
> + reg[6] = 0x00;
> + } else if (freq * 32 < 3560000) {
> + multi = 32;
> + reg[5] = 0x42;
> + reg[6] = 0x02;
> + } else if (freq * 24 < 3560000) {
> + multi = 24;
> + reg[5] = 0x22;
> + reg[6] = 0x00;
> + } else if (freq * 16 < 3560000) {
> + multi = 16;
> + reg[5] = 0x22;
> + reg[6] = 0x02;
> + } else if (freq * 12 < 3560000) {
> + multi = 12;
> + reg[5] = 0x12;
> + reg[6] = 0x00;
> + } else if (freq * 8 < 3560000) {
> + multi = 8;
> + reg[5] = 0x12;
> + reg[6] = 0x02;
> + } else if (freq * 6 < 3560000) {
> + multi = 6;
> + reg[5] = 0x0a;
> + reg[6] = 0x00;
> + } else {
> + multi = 4;
> + reg[5] = 0x0a;
> + reg[6] = 0x02;
> + }
> +
> + fVCO = freq * multi;
> +
> + if (fVCO >= 3060000) {
> + reg[6] |= 0x08;
> + vco_select = true;
> + }
> +
> + if (freq >= 45000) {
> + /* From divided value (XDIV) determined the FA and FP value */
> + xdiv = (unsigned short)(fVCO / xtal_freq_khz_2);
> + if ((fVCO - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
> + xdiv++;
> +
> + pm = (unsigned char)(xdiv / 8);
> + am = (unsigned char)(xdiv - (8 * pm));
> +
> + if (am < 2) {
> + reg[1] = am + 8;
> + reg[2] = pm - 1;
> + } else {
> + reg[1] = am;
> + reg[2] = pm;
> + }
> + } else {
> + /* fix for frequency less than 45 MHz */
> + reg[1] = 0x06;
> + reg[2] = 0x11;
> + }
> +
> + /* fix clock out */
> + reg[6] |= 0x20;
> +
> + /* From VCO frequency determines the XIN ( fractional part of Delta
> + Sigma PLL) and divided value (XDIV) */
> + xin = (unsigned short)(fVCO - (fVCO / xtal_freq_khz_2) *
> xtal_freq_khz_2);
> + xin = (xin << 15) / xtal_freq_khz_2;
> + if (xin >= 16384)
> + xin += 32768;
> +
> + reg[3] = xin >> 8; /* xin with 9 bit resolution */
> + reg[4] = xin & 0xff;
> +
> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)
> + if (delsys == SYS_DVBT) {
> + reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
> + switch (p->bandwidth_hz) {
> + case 6000000:
> + reg[6] |= 0x80;
> + break;
> + case 7000000:
> + reg[6] |= 0x40;
> + break;
> + case 8000000:
> + default:
> + break;
> + }
> +#else
> + if (fe->ops.info.type == FE_OFDM) {
> + reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
> + switch (params->u.ofdm.bandwidth) {
> + case BANDWIDTH_6_MHZ:
> + bw = 6000000;
> + reg[6] |= 0x80;
> + break;
> + case BANDWIDTH_7_MHZ:
> + bw = 7000000;
> + reg[6] |= 0x40;
> + break;
> + case BANDWIDTH_8_MHZ:
> + default:
> + bw = 8000000;
> + break;
> + }
> +#endif
> + } else {
> + err("%s: modulation type not supported!\n", __func__);
> + return -EINVAL;
> + }
> +
> + /* modified for Realtek demod */
> + reg[5] |= 0x07;
> +
> + ret = fc0012_writeregs(priv, 1, ®[1], 6);
> + if (ret)
> + goto error_out;
> +
> + /* VCO Calibration */
> + ret = fc0012_writereg(priv, 0x0e, 0x80);
> + if (!ret)
> + ret = fc0012_writereg(priv, 0x0e, 0x00);
> + /* VCO Re-Calibration if needed */
> + if (!ret)
> + ret = fc0012_writereg(priv, 0x0e, 0x00);
> +
> + if (!ret) {
> + msleep(10);
> + ret = fc0012_readreg(priv, 0x0e, ®[0x0e]);
> + }
> + if (ret)
> + goto error_out;
> +
> + /* vco selection */
> + reg[0x0e] &= 0x3f;
> +
> + if (vco_select) {
> + if (reg[0x0e] > 0x3c) {
> + reg[6] &= ~0x08;
> + ret = fc0012_writereg(priv, 0x06, reg[6]);
> + if (!ret)
> + ret = fc0012_writereg(priv, 0x0e, 0x80);
> + if (!ret)
> + ret = fc0012_writereg(priv, 0x0e, 0x00);
> + }
> + } else {
> + if (reg[0x0e] < 0x02) {
> + reg[6] |= 0x08;
> + ret = fc0012_writereg(priv, 0x06, reg[6]);
> + if (!ret)
> + ret = fc0012_writereg(priv, 0x0e, 0x80);
> + if (!ret)
> + ret = fc0012_writereg(priv, 0x0e, 0x00);
> + }
> + }
> +
> + priv->frequency = freq;
> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)
> + priv->bandwidth = p->bandwidth_hz;
> +#else
> + priv->bandwidth = bw;
> +#endif
> +
> +error_out:
> + return ret;
> +}
> +
> +static int fc0012_get_frequency(struct dvb_frontend *fe, u32 *frequency)
> +{
> + struct fc0012_priv *priv = fe->tuner_priv;
> + *frequency = priv->frequency;
> + return 0;
> +}
> +
> +#ifdef DEFINED_GET_IF_FREQUENCY
> +static int fc0012_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
> +{
> + /* CHECK: always ? */
> + *frequency = 0;
> + return 0;
> +}
> +#endif
> +
> +static int fc0012_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
> +{
> + struct fc0012_priv *priv = fe->tuner_priv;
> + *bandwidth = priv->bandwidth;
> + return 0;
> +}
> +
> +
> +static const struct dvb_tuner_ops fc0012_tuner_ops = {
> + .info = {
> + .name = "Fitipower FC0012",
> +
> + .frequency_min = 170000000,
> + .frequency_max = 860000000,
> + .frequency_step = 0,
> + },
> +
> + .release = fc0012_release,
> +
> + .init = fc0012_init,
> + .sleep = fc0012_sleep,
> +
> + .set_params = fc0012_set_params,
> +
> + .get_frequency = fc0012_get_frequency,
> +#ifdef DEFINED_GET_IF_FREQUENCY
> + .get_if_frequency = fc0012_get_if_frequency,
> +#endif
> + .get_bandwidth = fc0012_get_bandwidth,
> +};
> +
> +struct dvb_frontend * fc0012_attach(struct dvb_frontend *fe,
> + struct i2c_adapter *i2c, u8 i2c_address,
> + enum fc0012_xtal_freq xtal_freq)
> +{
> + struct fc0012_priv *priv = NULL;
> +
> + priv = kzalloc(sizeof(struct fc0012_priv), GFP_KERNEL);
> + if (priv == NULL)
> + return NULL;
> +
> + priv->i2c = i2c;
> + priv->addr = i2c_address;
> + priv->xtal_freq = xtal_freq;
> +
> + info("Fitipower FC0012 successfully attached.");
> +
> + fe->tuner_priv = priv;
> +
> + memcpy(&fe->ops.tuner_ops, &fc0012_tuner_ops,
> + sizeof(struct dvb_tuner_ops));
> +
> + return fe;
> +}
> +EXPORT_SYMBOL(fc0012_attach);
> +
> +MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver");
> +MODULE_AUTHOR("Hans-Frieder Vogt <hfv...@gmx.net>");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("0.1");
> diff -Nupr a/drivers/media/common/tuners/fc0012.h
> b/drivers/media/common/tuners/fc0012.h
> --- a/drivers/media/common/tuners/fc0012.h 1970-01-01 01:00:00.000000000
> +0100
> +++ b/drivers/media/common/tuners/fc0012.h 2012-02-20 23:02:11.639876934
> +0100
> @@ -0,0 +1,49 @@
> +/*
> + * Fitipower FC0012 tuner driver - include
> + *
> + * Copyright (C) 2012 Hans-Frieder Vogt <hfv...@gmx.net>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef _FC0012_H_
> +#define _FC0012_H_
> +
> +#include "dvb_frontend.h"
> +
> +enum fc0012_xtal_freq {
> + FC_XTAL_27_MHZ, /* 27000000 */
> + FC_XTAL_28_8_MHZ, /* 28800000 */
> + FC_XTAL_36_MHZ, /* 36000000 */
> +};
> +
> +#if defined(CONFIG_MEDIA_TUNER_FC0012) || \
> + (defined(CONFIG_MEDIA_TUNER_FC0012_MODULE) && defined(MODULE))
> +extern struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
> + struct i2c_adapter *i2c,
> + u8 i2c_address,
> + enum fc0012_xtal_freq xtal_freq);
> +#else
> +static inline struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
> + struct i2c_adapter *i2c,
> + u8 i2c_address,
> + enum fc0012_xtal_freq xtal_freq)
> +{
> + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
> + return NULL;
> +}
> +#endif
> +
> +#endif
> diff -Nupr a/drivers/media/common/tuners/fc0012-priv.h
> b/drivers/media/common/tuners/fc0012-priv.h
> --- a/drivers/media/common/tuners/fc0012-priv.h 1970-01-01
> 01:00:00.000000000
> +0100
> +++ b/drivers/media/common/tuners/fc0012-priv.h 2012-02-19
> 17:37:46.770986275 +0100
> @@ -0,0 +1,50 @@
> +/*
> + * Fitipower FC0012 tuner driver - private includes
> + *
> + * Copyright (C) 2012 Hans-Frieder Vogt <hfv...@gmx.net>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef _FC0012_PRIV_H_
> +#define _FC0012_PRIV_H_
> +
> +#define LOG_PREFIX "fc0012"
> +
> +#define dprintk(var, level, args...) \
> + do { \
> + if ((var & level)) \
> + printk(args); \
> + } while (0)
> +
> +#define deb_info(args...) dprintk(fc0012_debug, 0x01, args)
> +
> +#undef err
> +#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
> +#undef info
> +#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
> +#undef warn
> +#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
> +
> +struct fc0012_priv {
> + struct i2c_adapter *i2c;
> + u8 addr;
> + u8 xtal_freq;
> +
> + u32 frequency;
> + u32 bandwidth;
> +};
> +
> +#endif
> diff -Nupr a/drivers/media/common/tuners/Kconfig
> b/drivers/media/common/tuners/Kconfig
> --- a/drivers/media/common/tuners/Kconfig 2012-01-08 05:45:35.000000000
> +0100
> +++ b/drivers/media/common/tuners/Kconfig 2012-02-20 23:04:29.435357491
> +0100
> @@ -211,4 +211,11 @@ config MEDIA_TUNER_TDA18212
> help
> NXP TDA18212 silicon tuner driver.
>
> +config MEDIA_TUNER_FC0012
> + tristate "Fitipower FC0012 silicon tuner"
> + depends on VIDEO_MEDIA && I2C
> + default m if MEDIA_TUNER_CUSTOMISE
> + help
> + Fitipower FC0012 silicon tuner driver.
> +
> endmenu
> diff -Nupr a/drivers/media/common/tuners/Makefile
> b/drivers/media/common/tuners/Makefile
> --- a/drivers/media/common/tuners/Makefile 2012-01-05 05:45:47.000000000
> +0100
> +++ b/drivers/media/common/tuners/Makefile 2012-02-20 23:01:14.010487009
> +0100
> @@ -28,6 +28,7 @@ obj-$(CONFIG_MEDIA_TUNER_MC44S803) += mc
> obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o
> obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o
> obj-$(CONFIG_MEDIA_TUNER_TDA18212) += tda18212.o
> +obj-$(CONFIG_MEDIA_TUNER_FC0012) += fc0012.o
>
> ccflags-y += -Idrivers/media/dvb/dvb-core
> ccflags-y += -Idrivers/media/dvb/frontends
>
>
> Hans-Frieder Vogt e-mail: hfvogt <at> gmx .dot. net
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Patched git://linuxtv.org/media_build.git with your Fitipower FC0012
tuner driver(fc0012.patch) got here:
..
CC [M] /tmp/media_build/v4l/fc0012.o
/tmp/media_build/v4l/tda18212.c:21:0: warning: "pr_fmt" redefined
[enabled by default]
include/linux/printk.h:152:0: note: this is the location of the previous
definition
/tmp/media_build/v4l/fc0012.c:146:16: warning: 'struct
dvb_frontend_parameters' declared inside parameter list [enabled by default]
/tmp/media_build/v4l/fc0012.c:146:16: warning: its scope is only this
definition or declaration, which is probably not what you want [enabled
by default]
/tmp/media_build/v4l/fc0012.c: In function 'fc0012_set_params':
/tmp/media_build/v4l/fc0012.c:156:19: error: dereferencing pointer to
incomplete type
/tmp/media_build/v4l/fc0012.c:279:17: error: dereferencing pointer to
incomplete type
/tmp/media_build/v4l/fc0012.c:280:8: error: 'BANDWIDTH_6_MHZ' undeclared
(first use in this function)
/tmp/media_build/v4l/fc0012.c:280:8: note: each undeclared identifier is
reported only once for each function it appears in
/tmp/media_build/v4l/fc0012.c:284:8: error: 'BANDWIDTH_7_MHZ' undeclared
(first use in this function)
/tmp/media_build/v4l/fc0012.c:288:8: error: 'BANDWIDTH_8_MHZ' undeclared
(first use in this function)
/tmp/media_build/v4l/fc0012.c: At top level:
/tmp/media_build/v4l/fc0012.c:393:9: warning: initialization from
incompatible pointer type [enabled by default]
/tmp/media_build/v4l/fc0012.c:393:9: warning: (near initialization for
'fc0012_tuner_ops.set_params') [enabled by default]
make[3]: *** [/tmp/media_build/v4l/fc0012.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [_module_/tmp/media_build/v4l] Error 2
make[2]: Leaving directory `/usr/src/kernels/3.2.9-2.fc16.x86_64'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/tmp/media_build/v4l'
make: *** [all] Error 2
rgds,
poma
diff -Nupr a/drivers/media/common/tuners/fc0012.c b/drivers/media/common/tuners/fc0012.c
--- a/drivers/media/common/tuners/fc0012.c 1970-01-01 01:00:00.000000000 +0100
+++ b/drivers/media/common/tuners/fc0012.c 2012-02-19 17:37:27.364482154 +0100
@@ -0,0 +1,430 @@
+/*
+ * Fitipower FC0012 tuner driver
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfv...@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/version.h>
+#include "fc0012.h"
+#include "fc0012-priv.h"
+
+static int fc0012_debug;
+module_param_named(debug, fc0012_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Select debug level (default: debug off)");
+
+/* the FC0012 seems to have only byte access to the registers */
+static int fc0012_writeregs(struct fc0012_priv *priv, u8 reg, u8 *val, int len)
+{
+ u8 buf[1+len];
+ struct i2c_msg msg = { .addr = priv->addr,
+ .flags = 0, .buf = buf, .len = sizeof(buf) };
+
+ buf[0] = reg;
+ memcpy(&buf[1], val, len);
+
+ msleep(1);
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ err("I2C write regs failed, reg: %02x, val[0]: %02x",
+ reg, val[0]);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int fc0012_writereg(struct fc0012_priv *priv, u8 reg, u8 val)
+{
+ u8 buf[2] = {reg, val};
+ struct i2c_msg msg = { .addr = priv->addr,
+ .flags = 0, .buf = buf, .len = 2 };
+
+ msleep(1);
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ err("I2C write reg failed, reg: %02x, val: %02x", reg, val);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int fc0012_readreg(struct fc0012_priv *priv, u8 reg, u8 *val)
+{
+ struct i2c_msg msg[2] = {
+ { .addr = priv->addr,
+ .flags = 0, .buf = ®, .len = 1 },
+ { .addr = priv->addr,
+ .flags = I2C_M_RD, .buf = val, .len = 1 },
+ };
+
+ if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+ err("I2C read failed, reg: %02x", reg);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int fc0012_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static int fc0012_init(struct dvb_frontend *fe)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ int ret = 0;
+ u8 i;
+ unsigned char reg[] = {
+ 0x00, /* dummy reg. 0 */
+ 0x05, /* reg. 0x01 */
+ 0x10, /* reg. 0x02 */
+ 0x00, /* reg. 0x03 */
+ 0x00, /* reg. 0x04 */
+ 0x0a, /* reg. 0x05 CHECK: correct? */
+ 0x00, /* reg. 0x06: divider 2, VCO slow */
+ 0x0f, /* reg. 0x07 */
+ 0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256, Loop Bw 1/8 */
+ 0x6e, /* reg. 0x09: Disable LoopThrough */
+ 0xb8, /* reg. 0x0a: Disable LO Test Buffer */
+ 0x83, /* reg. 0x0b: Output Clock is same as clock frequency */
+ 0xfe, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
+ 0x02, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */
+ 0x00, /* reg. 0x0e */
+ 0x00, /* reg. 0x0f */
+ 0x0d, /* reg. 0x10 */
+ 0x00, /* reg. 0x11 */
+ 0x1f, /* reg. 0x12: Set to maximum gain */
+ 0x90, /* reg. 0x13: Enable IX2, Set to Middle Gain: 0x08, Low Gain: 0x00, High Gain: 0x10 */
+ 0x00, /* reg. 0x14 */
+ 0x04, /* reg. 0x15: Enable LNA COMPS */
+ };
+
+ switch (priv->xtal_freq) {
+ case FC_XTAL_27_MHZ:
+ case FC_XTAL_28_8_MHZ:
+ reg[0x07] |= 0x20;
+ break;
+ case FC_XTAL_36_MHZ:
+ default:
+ break;
+ }
+ for (i = 1; i < sizeof(reg); i++) {
+ ret = fc0012_writereg(priv, i, reg[i]);
+ if (ret)
+ break;
+ }
+
+ if (ret)
+ deb_info("%s: failed:%d\n", __func__, ret);
+
+ return ret;
+}
+
+static int fc0012_sleep(struct dvb_frontend *fe)
+{
+ /* nothing to do here */
+ return 0;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)
+static int fc0012_set_params(struct dvb_frontend *fe)
+#else
+static int fc0012_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+#endif
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ int ret;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ u32 freq = p->frequency / 1000;
+ u32 delsys = p->delivery_system;
+#else
+ u32 freq = params->frequency / 1000;
+ u32 bw = 0;
+#endif
+ unsigned char reg[0x16], am, pm, multi;
+ unsigned long fVCO;
+ unsigned short xtal_freq_khz_2, xin, xdiv;
+ int vco_select = false;
+
+ switch (priv->xtal_freq) {
+ case FC_XTAL_27_MHZ:
+ xtal_freq_khz_2 = 27000 / 2;
+ break;
+ case FC_XTAL_36_MHZ:
+ xtal_freq_khz_2 = 36000 / 2;
+ break;
+ case FC_XTAL_28_8_MHZ:
+ default:
+ xtal_freq_khz_2 = 28800 / 2;
+ break;
+ }
+
+ /* select frequency divider and the frequency of VCO */
+ if (freq * 96 < 3560000) {
+ multi = 96;
+ reg[5] = 0x82;
+ reg[6] = 0x00;
+ } else if (freq * 64 < 3560000) {
+ multi = 64;
+ reg[5] = 0x82;
+ reg[6] = 0x02;
+ } else if (freq * 48 < 3560000) {
+ multi = 48;
+ reg[5] = 0x42;
+ reg[6] = 0x00;
+ } else if (freq * 32 < 3560000) {
+ multi = 32;
+ reg[5] = 0x42;
+ reg[6] = 0x02;
+ } else if (freq * 24 < 3560000) {
+ multi = 24;
+ reg[5] = 0x22;
+ reg[6] = 0x00;
+ } else if (freq * 16 < 3560000) {
+ multi = 16;
+ reg[5] = 0x22;
+ reg[6] = 0x02;
+ } else if (freq * 12 < 3560000) {
+ multi = 12;
+ reg[5] = 0x12;
+ reg[6] = 0x00;
+ } else if (freq * 8 < 3560000) {
+ multi = 8;
+ reg[5] = 0x12;
+ reg[6] = 0x02;
+ } else if (freq * 6 < 3560000) {
+ multi = 6;
+ reg[5] = 0x0a;
+ reg[6] = 0x00;
+ } else {
+ multi = 4;
+ reg[5] = 0x0a;
+ reg[6] = 0x02;
+ }
+
+ fVCO = freq * multi;
+
+ if (fVCO >= 3060000) {
+ reg[6] |= 0x08;
+ vco_select = true;
+ }
+
+ if (freq >= 45000) {
+ /* From divided value (XDIV) determined the FA and FP value */
+ xdiv = (unsigned short)(fVCO / xtal_freq_khz_2);
+ if ((fVCO - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
+ xdiv++;
+
+ pm = (unsigned char)(xdiv / 8);
+ am = (unsigned char)(xdiv - (8 * pm));
+
+ if (am < 2) {
+ reg[1] = am + 8;
+ reg[2] = pm - 1;
+ } else {
+ reg[1] = am;
+ reg[2] = pm;
+ }
+ } else {
+ /* fix for frequency less than 45 MHz */
+ reg[1] = 0x06;
+ reg[2] = 0x11;
+ }
+
+ /* fix clock out */
+ reg[6] |= 0x20;
+
+ /* From VCO frequency determines the XIN ( fractional part of Delta
+ Sigma PLL) and divided value (XDIV) */
+ xin = (unsigned short)(fVCO - (fVCO / xtal_freq_khz_2) * xtal_freq_khz_2);
+ xin = (xin << 15) / xtal_freq_khz_2;
+ if (xin >= 16384)
+ xin += 32768;
+
+ reg[3] = xin >> 8; /* xin with 9 bit resolution */
+ reg[4] = xin & 0xff;
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)
+ if (delsys == SYS_DVBT) {
+ reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
+ switch (p->bandwidth_hz) {
+ case 6000000:
+ reg[6] |= 0x80;
+ break;
+ case 7000000:
+ reg[6] |= 0x40;
+ break;
+ case 8000000:
+ default:
+ break;
+ }
+#else
+ if (fe->ops.info.type == FE_OFDM) {
+ reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ bw = 6000000;
+ reg[6] |= 0x80;
+ break;
+ case BANDWIDTH_7_MHZ:
+ bw = 7000000;
+ reg[6] |= 0x40;
+ break;
+ case BANDWIDTH_8_MHZ:
+ default:
+ bw = 8000000;
+ break;
+ }
+#endif
+ } else {
+ err("%s: modulation type not supported!\n", __func__);
+ return -EINVAL;
+ }
+
+ /* modified for Realtek demod */
+ reg[5] |= 0x07;
+
+ ret = fc0012_writeregs(priv, 1, ®[1], 6);
+ if (ret)
+ goto error_out;
+
+ /* VCO Calibration */
+ ret = fc0012_writereg(priv, 0x0e, 0x80);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+ /* VCO Re-Calibration if needed */
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+
+ if (!ret) {
+ msleep(10);
+ ret = fc0012_readreg(priv, 0x0e, ®[0x0e]);
+ }
+ if (ret)
+ goto error_out;
+
+ /* vco selection */
+ reg[0x0e] &= 0x3f;
+
+ if (vco_select) {
+ if (reg[0x0e] > 0x3c) {
+ reg[6] &= ~0x08;
+ ret = fc0012_writereg(priv, 0x06, reg[6]);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x80);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+ }
+ } else {
+ if (reg[0x0e] < 0x02) {
+ reg[6] |= 0x08;
+ ret = fc0012_writereg(priv, 0x06, reg[6]);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x80);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+ }
+ }
+
+ priv->frequency = freq;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)
+ priv->bandwidth = p->bandwidth_hz;
+#else
+ priv->bandwidth = bw;
+#endif
+
+error_out:
+ return ret;
+}
+
+static int fc0012_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+#ifdef DEFINED_GET_IF_FREQUENCY
+static int fc0012_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ /* CHECK: always ? */
+ *frequency = 0;
+ return 0;
+}
+#endif
+
+static int fc0012_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ *bandwidth = priv->bandwidth;
+ return 0;
+}
+
+
+static const struct dvb_tuner_ops fc0012_tuner_ops = {
+ .info = {
+ .name = "Fitipower FC0012",
+
+ .frequency_min = 170000000,
+ .frequency_max = 860000000,
+ .frequency_step = 0,
+ },
+
+ .release = fc0012_release,
+
+ .init = fc0012_init,
+ .sleep = fc0012_sleep,
+
+ .set_params = fc0012_set_params,
+
+ .get_frequency = fc0012_get_frequency,
+#ifdef DEFINED_GET_IF_FREQUENCY
+ .get_if_frequency = fc0012_get_if_frequency,
+#endif
+ .get_bandwidth = fc0012_get_bandwidth,
+};
+
+struct dvb_frontend * fc0012_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c, u8 i2c_address,
+ enum fc0012_xtal_freq xtal_freq)
+{
+ struct fc0012_priv *priv = NULL;
+
+ priv = kzalloc(sizeof(struct fc0012_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->i2c = i2c;
+ priv->addr = i2c_address;
+ priv->xtal_freq = xtal_freq;
+
+ info("Fitipower FC0012 successfully attached.");
+
+ fe->tuner_priv = priv;
+
+ memcpy(&fe->ops.tuner_ops, &fc0012_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ return fe;
+}
+EXPORT_SYMBOL(fc0012_attach);
+
+MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver");
+MODULE_AUTHOR("Hans-Frieder Vogt <hfv...@gmx.net>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
diff -Nupr a/drivers/media/common/tuners/fc0012.h b/drivers/media/common/tuners/fc0012.h
--- a/drivers/media/common/tuners/fc0012.h 1970-01-01 01:00:00.000000000 +0100
+++ b/drivers/media/common/tuners/fc0012.h 2012-02-20 23:02:11.639876934 +0100
@@ -0,0 +1,49 @@
+/*
+ * Fitipower FC0012 tuner driver - include
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfv...@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _FC0012_H_
+#define _FC0012_H_
+
+#include "dvb_frontend.h"
+
+enum fc0012_xtal_freq {
+ FC_XTAL_27_MHZ, /* 27000000 */
+ FC_XTAL_28_8_MHZ, /* 28800000 */
+ FC_XTAL_36_MHZ, /* 36000000 */
+};
+
+#if defined(CONFIG_MEDIA_TUNER_FC0012) || \
+ (defined(CONFIG_MEDIA_TUNER_FC0012_MODULE) && defined(MODULE))
+extern struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ u8 i2c_address,
+ enum fc0012_xtal_freq xtal_freq);
+#else
+static inline struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ u8 i2c_address,
+ enum fc0012_xtal_freq xtal_freq)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif
diff -Nupr a/drivers/media/common/tuners/fc0012-priv.h b/drivers/media/common/tuners/fc0012-priv.h
--- a/drivers/media/common/tuners/fc0012-priv.h 1970-01-01 01:00:00.000000000 +0100
+++ b/drivers/media/common/tuners/fc0012-priv.h 2012-02-19 17:37:46.770986275 +0100
@@ -0,0 +1,50 @@
+/*
+ * Fitipower FC0012 tuner driver - private includes
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfv...@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _FC0012_PRIV_H_
+#define _FC0012_PRIV_H_
+
+#define LOG_PREFIX "fc0012"
+
+#define dprintk(var, level, args...) \
+ do { \
+ if ((var & level)) \
+ printk(args); \
+ } while (0)
+
+#define deb_info(args...) dprintk(fc0012_debug, 0x01, args)
+
+#undef err
+#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
+#undef info
+#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
+#undef warn
+#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
+
+struct fc0012_priv {
+ struct i2c_adapter *i2c;
+ u8 addr;
+ u8 xtal_freq;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+#endif
diff -Nupr a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
--- a/drivers/media/common/tuners/Kconfig 2012-01-08 05:45:35.000000000 +0100
+++ b/drivers/media/common/tuners/Kconfig 2012-02-20 23:04:29.435357491 +0100
@@ -211,4 +211,11 @@ config MEDIA_TUNER_TDA18212
help
NXP TDA18212 silicon tuner driver.
+config MEDIA_TUNER_FC0012
+ tristate "Fitipower FC0012 silicon tuner"
+ depends on VIDEO_MEDIA && I2C
+ default m if MEDIA_TUNER_CUSTOMISE
+ help
+ Fitipower FC0012 silicon tuner driver.
+
endmenu
diff -Nupr a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile
--- a/drivers/media/common/tuners/Makefile 2012-01-05 05:45:47.000000000 +0100
+++ b/drivers/media/common/tuners/Makefile 2012-02-20 23:01:14.010487009 +0100
@@ -28,6 +28,7 @@ obj-$(CONFIG_MEDIA_TUNER_MC44S803) += mc
obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o
obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o
obj-$(CONFIG_MEDIA_TUNER_TDA18212) += tda18212.o
+obj-$(CONFIG_MEDIA_TUNER_FC0012) += fc0012.o
ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core
ccflags-y += -I$(srctree)/drivers/media/dvb/frontends
