On Mon 25 June 2012 14:54:39 Laurent Pinchart wrote:
> Hi Manjunath,
>
> Thank you for the patch.
>
> On Monday 25 June 2012 16:37:30 Manjunath Hadli wrote:
> > add hardware clipping support for VPIF output data. This
> > is needed as it is possible that the external encoder
> > might get confused between the FF or 00 which are a part
> > of the data and that of the SAV or EAV codes.
> >
> > Signed-off-by: Manjunath Hadli <[email protected]>
> > Signed-off-by: Lad, Prabhakar <[email protected]>
> > ---
> > drivers/media/video/davinci/vpif.h | 30 +++++++++++++++++++++++++
> > drivers/media/video/davinci/vpif_display.c | 10 +++++++++
> > include/media/davinci/vpif_types.h | 2 +
> > 3 files changed, 42 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/media/video/davinci/vpif.h
> > b/drivers/media/video/davinci/vpif.h index a4d2141..c2ce4d9 100644
> > --- a/drivers/media/video/davinci/vpif.h
> > +++ b/drivers/media/video/davinci/vpif.h
> > @@ -211,6 +211,12 @@ static inline void vpif_clr_bit(u32 reg, u32 bit)
> > #define VPIF_CH3_INT_CTRL_SHIFT (6)
> > #define VPIF_CH_INT_CTRL_SHIFT (6)
> >
> > +#define VPIF_CH2_CLIP_ANC_EN 14
> > +#define VPIF_CH2_CLIP_ACTIVE_EN 13
> > +
> > +#define VPIF_CH3_CLIP_ANC_EN 14
> > +#define VPIF_CH3_CLIP_ACTIVE_EN 13
> > +
> > /* enabled interrupt on both the fields on vpid_ch0_ctrl register */
> > #define channel0_intr_assert() (regw((regr(VPIF_CH0_CTRL)|\
> > (VPIF_INT_BOTH << VPIF_CH0_INT_CTRL_SHIFT)), VPIF_CH0_CTRL))
> > @@ -515,6 +521,30 @@ static inline void channel3_raw_enable(int enable, u8
> > index) vpif_clr_bit(VPIF_CH3_CTRL, mask);
> > }
> >
> > +/* function to enable clipping (for both active and blanking regions) on ch
> > 2 */ +static inline void channel2_clipping_enable(int enable)
> > +{
> > + if (enable) {
> > + vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN);
> > + vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN);
> > + } else {
> > + vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN);
> > + vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN);
> > + }
> > +}
> > +
> > +/* function to enable clipping (for both active and blanking regions) on ch
> > 2 */ +static inline void channel3_clipping_enable(int enable)
> > +{
> > + if (enable) {
> > + vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN);
> > + vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN);
> > + } else {
> > + vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN);
> > + vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN);
> > + }
> > +}
> > +
> > /* inline function to set buffer addresses in case of Y/C non mux mode */
> > static inline void ch2_set_videobuf_addr_yc_nmux(unsigned long
> > top_strt_luma, unsigned long btm_strt_luma,
> > diff --git a/drivers/media/video/davinci/vpif_display.c
> > b/drivers/media/video/davinci/vpif_display.c index 61ea8bc..4436ef6 100644
> > --- a/drivers/media/video/davinci/vpif_display.c
> > +++ b/drivers/media/video/davinci/vpif_display.c
> > @@ -1046,6 +1046,8 @@ static int vpif_streamon(struct file *file, void
> > *priv, channel2_intr_assert();
> > channel2_intr_enable(1);
> > enable_channel2(1);
> > + if (vpif_config_data->ch2_clip_en)
> > + channel2_clipping_enable(1);
> > }
> >
> > if ((VPIF_CHANNEL3_VIDEO == ch->channel_id)
> > @@ -1053,6 +1055,8 @@ static int vpif_streamon(struct file *file, void
> > *priv, channel3_intr_assert();
> > channel3_intr_enable(1);
> > enable_channel3(1);
> > + if (vpif_config_data->ch3_clip_en)
> > + channel3_clipping_enable(1);
> > }
> > channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
> > }
> > @@ -1065,6 +1069,8 @@ static int vpif_streamoff(struct file *file, void
> > *priv, struct vpif_fh *fh = priv;
> > struct channel_obj *ch = fh->channel;
> > struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
> > + struct vpif_display_config *vpif_config_data =
> > + vpif_dev->platform_data;
> >
> > if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
> > vpif_err("buffer type not supported\n");
> > @@ -1084,11 +1090,15 @@ static int vpif_streamoff(struct file *file, void
> > *priv, if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
> > /* disable channel */
> > if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
> > + if (vpif_config_data->ch2_clip_en)
> > + channel2_clipping_enable(0);
> > enable_channel2(0);
> > channel2_intr_enable(0);
> > }
> > if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
> > (2 == common->started)) {
> > + if (vpif_config_data->ch3_clip_en)
> > + channel3_clipping_enable(0);
> > enable_channel3(0);
> > channel3_intr_enable(0);
> > }
> > diff --git a/include/media/davinci/vpif_types.h
> > b/include/media/davinci/vpif_types.h index bd8217c..d8f6ab1 100644
> > --- a/include/media/davinci/vpif_types.h
> > +++ b/include/media/davinci/vpif_types.h
> > @@ -50,6 +50,8 @@ struct vpif_display_config {
> > const char **output;
> > int output_count;
> > const char *card_name;
> > + bool ch2_clip_en;
> > + bool ch3_clip_en;
>
> Instead of hardcoding this in platform data, I think it would be better to
> make this runtime-configurable. One option is to use the value of the
> v4l2_pix_format::colorspace field configured by userspace. We already have
> V4L2_COLORSPACE_JPEG which maps to the full 0-255 range, but we're missing a
> colorspace for the clipped 1-254 range used by the VPIF and I'm not sure
> whether it would really make sense to add one. Another option is to use a
> V4L2
> control.
This is something for a V4L2 control I think since clipping is colorspace
independent (you have the same situation for e.g. YCbCr).
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
