Hi Guennadi,
Thank you for your very detailed comment.
> Hi Alex
> Yes, this looks much better to me now. Still, I'd like to ask you to
> make a couple more changes. First - there are different opinions about how
> really important a patch description is, whether there are at all cases,
> when an empty description is acceptable. I do sometimes myself provide no
> description and accept the same from others, but only in really trivial
> cases, where the single patch subject line perfectly tells it all.
> However, I don't think this is the case here. It would be nice to have a
> couple of words in the patch description, saying, that "mt9v024 is a
> camera sensor, very similar to mt9v022 with just a few differences, namely
> its sensor matrix size is now ... instead of ..., some register locations
> have changed,..."
No problem, I'll add descriptions.
> While at it, please, also change one more thing. Yes, it was my request to
> move chip_id into the private struct, but now with the addition of "struct
> mt9v02x_register" it is not needed anymore. The chip_id is only used in
> the probe function, so, you don't have to save it. Please, if I'm not
> mistaken and I haven't missed some additional uses of chip_id, remove it
> again and just leave the local "data" variable without change.
> Respectively, your is_mt9v024 macro will change to
> #define is_mt9v024(id) (id == 0x1324)
I only have a few doubts about this:
mt9v024 camera sensor has about 20 additional registers that are not supported
in mt9v022 camera sensor.
What should be happened if someone wants to add this registers?
I guess, that in this case we will need to use the chip_id outside of the probe
function.
What do you think?
Regards,
Alex
> Signed-off-by: Alex Gershgorin <al...@meprolight.com>
> ---
> drivers/media/video/Kconfig | 2 +-
> drivers/media/video/mt9v022.c | 45 ++++++++++++++++++++++++++++++++--------
> 2 files changed, 37 insertions(+), 10 deletions(-)
>
> Changes for v2:
> Fixed comment from Guennadi.
>
> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> index c128fac..3ce905c 100644
> --- a/drivers/media/video/Kconfig
> +++ b/drivers/media/video/Kconfig
> @@ -1058,7 +1058,7 @@ config SOC_CAMERA_MT9T112
> This driver supports MT9T112 cameras from Aptina.
>
> config SOC_CAMERA_MT9V022
> - tristate "mt9v022 support"
> + tristate "mt9v022 and mt9v024 support"
> depends on SOC_CAMERA && I2C
> select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
> help
> diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
> index 7247924..d46727b 100644
> --- a/drivers/media/video/mt9v022.c
> +++ b/drivers/media/video/mt9v022.c
> @@ -57,6 +57,10 @@ MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or
> \"monochrome\"");
> #define MT9V022_AEC_AGC_ENABLE 0xAF
> #define MT9V022_MAX_TOTAL_SHUTTER_WIDTH 0xBD
>
> +/* mt9v024 partial list register addresses changes with respect to mt9v022 */
> +#define MT9V024_PIXCLK_FV_LV 0x72
> +#define MT9V024_MAX_TOTAL_SHUTTER_WIDTH 0xAD
> +
> /* Progressive scan, master, defaults */
> #define MT9V022_CHIP_CONTROL_DEFAULT 0x188
>
> @@ -67,6 +71,8 @@ MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or
> \"monochrome\"");
> #define MT9V022_COLUMN_SKIP 1
> #define MT9V022_ROW_SKIP 4
>
> +#define is_mt9v024(p) (p->chip_id == 0x1324)
> +
> /* MT9V022 has only one fixed colorspace per pixelcode */
> struct mt9v022_datafmt {
> enum v4l2_mbus_pixelcode code;
> @@ -101,6 +107,22 @@ static const struct mt9v022_datafmt
> mt9v022_monochrome_fmts[] = {
> {V4L2_MBUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG},
> };
>
> +/* only registers with different addresses on different mt9v02x sensors */
> +struct mt9v02x_register {
> + u8 max_total_shutter_width;
> + u8 pixclk_fv_lv;
> +};
> +
> +static const struct mt9v02x_register mt9v022_register = {
> + .max_total_shutter_width = MT9V022_MAX_TOTAL_SHUTTER_WIDTH,
> + .pixclk_fv_lv = MT9V022_PIXCLK_FV_LV,
> +};
> +
> +static const struct mt9v02x_register mt9v024_register = {
> + .max_total_shutter_width = MT9V024_MAX_TOTAL_SHUTTER_WIDTH,
> + .pixclk_fv_lv = MT9V024_PIXCLK_FV_LV,
> +};
> +
> struct mt9v022 {
> struct v4l2_subdev subdev;
> struct v4l2_ctrl_handler hdl;
> @@ -117,10 +139,12 @@ struct mt9v022 {
> struct v4l2_rect rect; /* Sensor window */
> const struct mt9v022_datafmt *fmt;
> const struct mt9v022_datafmt *fmts;
> + const struct mt9v02x_register *reg;
> int num_fmts;
> int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */
> u16 chip_control;
> unsigned short y_skip_top; /* Lines to skip at the top */
> + s32 chip_id;
> };
>
> static struct mt9v022 *to_mt9v022(const struct i2c_client *client)
> @@ -185,7 +209,7 @@ static int mt9v022_init(struct i2c_client *client)
> if (!ret)
> ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, 480);
> if (!ret)
> - ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480);
> + ret = reg_write(client, mt9v022->reg->max_total_shutter_width,
> 480);
> if (!ret)
> /* default - auto */
> ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1);
> @@ -238,7 +262,7 @@ static int mt9v022_s_crop(struct v4l2_subdev *sd, struct
> v4l2_crop *a)
> ret = reg_read(client, MT9V022_AEC_AGC_ENABLE);
> if (ret >= 0) {
> if (ret & 1) /* Autoexposure */
> - ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH,
> + ret = reg_write(client,
> mt9v022->reg->max_total_shutter_width,
> rect.height + mt9v022->y_skip_top + 43);
> else
> ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
> @@ -566,21 +590,24 @@ static int mt9v022_video_probe(struct i2c_client
> *client)
> {
> struct mt9v022 *mt9v022 = to_mt9v022(client);
> struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
> - s32 data;
> int ret;
> unsigned long flags;
>
> /* Read out the chip version register */
> - data = reg_read(client, MT9V022_CHIP_VERSION);
> + mt9v022->chip_id = reg_read(client, MT9V022_CHIP_VERSION);
>
> - /* must be 0x1311 or 0x1313 */
> - if (data != 0x1311 && data != 0x1313) {
> + /* must be 0x1311, 0x1313 or 0x1324 */
> + if (mt9v022->chip_id != 0x1311 && mt9v022->chip_id != 0x1313 &&
> + mt9v022->chip_id != 0x1324) {
> ret = -ENODEV;
> dev_info(&client->dev, "No MT9V022 found, ID register 0x%x\n",
> - data);
> + mt9v022->chip_id);
> goto ei2c;
> }
>
> + mt9v022->reg = is_mt9v024(mt9v022) ? &mt9v024_register :
> + &mt9v022_register;
> +
> /* Soft reset */
> ret = reg_write(client, MT9V022_RESET, 1);
> if (ret < 0)
> @@ -632,7 +659,7 @@ static int mt9v022_video_probe(struct i2c_client *client)
> mt9v022->fmt = &mt9v022->fmts[0];
>
> dev_info(&client->dev, "Detected a MT9V022 chip ID %x, %s sensor\n",
> - data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ?
> + mt9v022->chip_id, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ?
> "monochrome" : "colour");
>
> ret = mt9v022_init(client);
> @@ -728,7 +755,7 @@ static int mt9v022_s_mbus_config(struct v4l2_subdev *sd,
> if (!(flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH))
> pixclk |= 0x2;
>
> - ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
> + ret = reg_write(client, mt9v022->reg->pixclk_fv_lv, pixclk);
> if (ret < 0)
> return ret;
>
> --
> 1.7.0.4
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
