Hi,

it seems that my 9 years old LNBs got some drift over time, as tuning takes quite a while until I get a lock. So I thought I could compensate this offset by adjusting VDR's diseqc.conf.

Therefore I first hacked some logging into VDR's tuner code to read and output the above mentioned property once it got a lock after tuning. As VDR's EPG scanner travels over all transponders when idle, I get offset values for all transponders and can then try to find some average offset to put into diseqc.conf.

So here are several "travel" results for a single transponder ordered by Delta:

Sat.    Pol.    Band    Freq (MHz) Set  Freq (MHz) Get  Delta (MHz)
S13,0E  H       H       11938   11930,528       -7,472
S13,0E  H       H       11938   11936,294       -1,706
S13,0E  H       H       11938   11938,917       0,917
S13,0E  H       H       11938   11939,158       1,158
S13,0E  H       H       11938   11939,906       1,906
S13,0E  H       H       11938   11939,965       1,965
S13,0E  H       H       11938   11940,029       2,029
S13,0E  H       H       11938   11940,032       2,032
S13,0E  H       H       11938   11940,103       2,103
S13,0E  H       H       11938   11940,112       2,112
S13,0E  H       H       11938   11940,167       2,167
S13,0E  H       H       11938   11941,736       3,736
S13,0E  H       H       11938   11941,736       3,736
S13,0E  H       H       11938   11941,736       3,736
S13,0E  H       H       11938   11942,412       4,412
S13,0E  H       H       11938   11943,604       5,604
S13,0E  H       H       11938   11943,604       5,604
S13,0E  H       H       11938   11943,604       5,604
S13,0E  H       H       11938   11945,472       7,472
S13,0E  H       H       11938   11945,472       7,472
S13,0E  H       H       11938   11945,472       7,472
S13,0E  H       H       11938   11945,472       7,472
S13,0E  H       H       11938   11945,472       7,472
S13,0E  H       H       11938   11945,472       7,472
S13,0E  H       H       11938   11945,472       7,472
S13,0E  H       H       11938   11945,777       7,777
S13,0E  H       H       11938   11945,777       7,777
S13,0E  H       H       11938   11945,777       7,777
S13,0E  H       H       11938   11945,777       7,777

I really wonder why Delta varies that much, and there are other transponders in the same band which have no larger deltas then 3 MHz.

So is it at all possible to determine LNB drift in that way?

My other device, a STB0899, always reports the set frequency. So it seems driver dependent whether it reports the actually locked frequency found by the zig-zag-algorithm or just the set frequency to tune to.

Thanks in advance for any replies.

Bye.
--
Dipl.-Inform. (FH) Reinhard Nissl
mailto:[email protected]
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to