This is needed for carrier reporting.
Signed-off-by: Sean Young <[email protected]>
---
drivers/media/rc/winbond-cir.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 6f0f5ef..1ff47eb 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -358,7 +358,7 @@ wbcir_irq_rx(struct wbcir_data *data, struct pnp_dev
*device)
if (data->rxstate == WBCIR_RXSTATE_ERROR)
continue;
rawir.pulse = irdata & 0x80 ? false : true;
- rawir.duration = US_TO_NS(((irdata & 0x7F) + 1) * 10);
+ rawir.duration = US_TO_NS(((irdata & 0x7F) + 1) * 2);
ir_raw_event_store_with_filter(data->dev, &rawir);
}
@@ -862,8 +862,8 @@ wbcir_init_hw(struct wbcir_data *data)
/* prescaler 1.0, tx/rx fifo lvl 16 */
outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
- /* Set baud divisor to sample every 10 us */
- outb(0x0F, data->sbase + WBCIR_REG_SP3_BGDL);
+ /* Set baud divisor to sample every 2 ns */
+ outb(0x03, data->sbase + WBCIR_REG_SP3_BGDL);
outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
/* Set CEIR mode */
@@ -872,9 +872,12 @@ wbcir_init_hw(struct wbcir_data *data)
inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
- /* Disable RX demod, enable run-length enc/dec, set freq span */
+ /*
+ * Disable RX demod, enable run-length enc/dec, set freq span and
+ * enable over-sampling
+ */
wbcir_select_bank(data, WBCIR_BANK_7);
- outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG);
+ outb(0xd0, data->sbase + WBCIR_REG_SP3_RCCFG);
/* Disable timer */
wbcir_select_bank(data, WBCIR_BANK_4);
@@ -1017,6 +1020,7 @@ wbcir_probe(struct pnp_dev *device, const struct
pnp_device_id *dev_id)
data->dev->priv = data;
data->dev->dev.parent = &device->dev;
data->dev->timeout = MS_TO_NS(100);
+ data->dev->rx_resolution = US_TO_NS(2);
data->dev->allowed_protos = RC_TYPE_ALL;
if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
