Hi Sakari,
On Thursday 25 October 2012 00:48:18 Sakari Ailus wrote:
> On Fri, Sep 28, 2012 at 07:50:49PM +0530, Prashanth Subramanya wrote:
> > This driver adds basic support for Aptina ar0130 1.2M sensor.
> >
> > Changes for v2:
> > 1: Include new test pattern control as pointed by Hans and Lad.
> > 2: Remove soc_camera.h as suggested by Guennadi.
> > 3: Change auto exposure control as pointed by Dan Rittersdorf.
> > 4: Change incorrect return value as pointed by Nicolas.
> > 5: Change crop and binning settings.
> >
> > Signed-off-by: Prashanth Subramanya <[email protected]>
> > ---
[snip]
> > +/**
> > + * PLL Dividers
> > + *
> > + * Calculated according to the following formula:
> > + *
> > + * target_freq = (ext_freq x M) / (N x P1 x P2)
> > + * VCO_freq = (ext_freq x M) / N
> > + *
> > + * And subject to the following limitations:
> > + *
> > + * Limitations of PLL parameters
> > + * -----------------------------
> > + * 32 ≤ M ≤ 384
> > + * 1 ≤ N ≤ 64
> > + * 1 ≤ P1 ≤ 16
> > + * 4 ≤ P2 ≤ 16
> > + * 384MHz ≤ VCO_freq ≤ 768MHz
> > + *
> > + * TODO: Use Aptina PLL Helper module to calculate dividers
> > + */
> > +
> > +static const struct ar0130_pll_divs ar0130_divs[] = {
> > + /* ext_freq target_freq M N p1 p2 */
> > + {24000000, 48000000, 32, 2, 2, 4},
> > + {24000000, 66000000, 44, 2, 2, 4},
> > + {48000000, 48000000, 40, 5, 2, 4}
> > +};
>
> Do you think you could use the smiapp-pll PLL calculator, as your pll looks
> similar to that? Here you're making a lot of assumptions you wouldn't have
> to make.
The patches that we have worked on together in the past few days are for this
driver. So, yes, it should use smiapp-pll :-) I've sent the smiapp-pll patches
to Prashanth already.
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
