From: Libin Yang <lby...@marvell.com>
This patch adds the clock tree support for marvell-ccic.
Each board may require different clk enabling sequence.
Developer need add the clk_name in correct sequence in board driver
to use this feature.
Signed-off-by: Libin Yang <lby...@marvell.com>
Signed-off-by: Albert Wang <twan...@marvell.com>
---
drivers/media/platform/marvell-ccic/mcam-core.h | 6 +++
drivers/media/platform/marvell-ccic/mmp-driver.c | 57 ++++++++++++++++++++++
include/media/mmp-camera.h | 5 ++
3 files changed, 68 insertions(+)
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h
b/drivers/media/platform/marvell-ccic/mcam-core.h
index 2d444a1..0df6b1c 100755
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -88,6 +88,7 @@ struct mmp_frame_state {
* the dev_lock spinlock; they are marked as such by comments.
* dev_lock is also required for access to device registers.
*/
+#define NR_MCAM_CLK 4
struct mcam_camera {
/*
* These fields should be set by the platform code prior to
@@ -107,6 +108,11 @@ struct mcam_camera {
int (*dphy)[3];
int mipi_enabled;
int lane; /* lane number */
+
+ /* clock tree support */
+ struct clk *clk[NR_MCAM_CLK];
+ int clk_num;
+
/*
* Callbacks from the core to the platform code.
*/
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c
b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 9d7aa79..80977b0 100755
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -104,6 +104,23 @@ static struct mmp_camera *mmpcam_find_device(struct
platform_device *pdev)
#define REG_CCIC_DCGCR 0x28 /* CCIC dyn clock gate ctrl reg */
#define REG_CCIC_CRCR 0x50 /* CCIC clk reset ctrl reg */
+static void mcam_clk_set(struct mcam_camera *mcam, int on)
+{
+ unsigned int i;
+
+ if (on) {
+ for (i = 0; i < mcam->clk_num; i++) {
+ if (mcam->clk[i])
+ clk_enable(mcam->clk[i]);
+ }
+ } else {
+ for (i = 0; i < mcam->clk_num; i++) {
+ if (mcam->clk[i])
+ clk_disable(mcam->clk[i]);
+ }
+ }
+}
+
/*
* Power control.
*/
@@ -134,6 +151,8 @@ static void mmpcam_power_up(struct mcam_camera *mcam)
mdelay(5);
gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
mdelay(5);
+
+ mcam_clk_set(mcam, 1);
}
static void mmpcam_power_down(struct mcam_camera *mcam)
@@ -151,6 +170,8 @@ static void mmpcam_power_down(struct mcam_camera *mcam)
pdata = cam->pdev->dev.platform_data;
gpio_set_value(pdata->sensor_power_gpio, 0);
gpio_set_value(pdata->sensor_reset_gpio, 0);
+
+ mcam_clk_set(mcam, 0);
}
/*
@@ -229,6 +250,37 @@ static irqreturn_t mmpcam_irq(int irq, void *data)
return IRQ_RETVAL(handled);
}
+static void mcam_init_clk(struct mcam_camera *mcam,
+ struct mmp_camera_platform_data *pdata, int init)
+{
+ unsigned int i;
+
+ if (NR_MCAM_CLK < pdata->clk_num) {
+ dev_warn(mcam->dev, "Too many mcam clocks defined\n");
+ mcam->clk_num = 0;
+ return;
+ }
+
+ if (init) {
+ for (i = 0; i < pdata->clk_num; i++) {
+ if (pdata->clk_name[i] != NULL)
+ mcam->clk[i] = clk_get(mcam->dev,
+ pdata->clk_name[i]);
+ if (IS_ERR(mcam->clk[i]))
+ dev_warn(mcam->dev, "Could not get clk: %s\n",
+ pdata->clk_name[i]);
+ }
+ mcam->clk_num = pdata->clk_num;
+ } else {
+ for (i = 0; i < pdata->clk_num; i++) {
+ if (mcam->clk[i]) {
+ clk_put(mcam->clk[i]);
+ mcam->clk[i] = NULL;
+ }
+ }
+ mcam->clk_num = 0;
+ }
+}
static int mmpcam_probe(struct platform_device *pdev)
{
@@ -290,6 +342,8 @@ static int mmpcam_probe(struct platform_device *pdev)
ret = -ENODEV;
goto out_unmap1;
}
+
+ mcam_init_clk(mcam, pdata, 1);
/*
* Find the i2c adapter. This assumes, of course, that the
* i2c bus is already up and functioning.
@@ -317,6 +371,7 @@ static int mmpcam_probe(struct platform_device *pdev)
goto out_gpio;
}
gpio_direction_output(pdata->sensor_reset_gpio, 0);
+
/*
* Power the device up and hand it off to the core.
*/
@@ -349,6 +404,7 @@ out_gpio2:
out_gpio:
gpio_free(pdata->sensor_power_gpio);
out_unmap2:
+ mcam_init_clk(mcam, pdata, 0);
iounmap(cam->power_regs);
out_unmap1:
iounmap(mcam->regs);
@@ -372,6 +428,7 @@ static int mmpcam_remove(struct mmp_camera *cam)
gpio_free(pdata->sensor_power_gpio);
iounmap(cam->power_regs);
iounmap(mcam->regs);
+ mcam_init_clk(mcam, pdata, 0);
kfree(cam);
return 0;
}
diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h
index a0b034a..e161ae0 100755
--- a/include/media/mmp-camera.h
+++ b/include/media/mmp-camera.h
@@ -15,4 +15,9 @@ struct mmp_camera_platform_data {
int mipi_enabled; /* MIPI enabled flag */
int lane; /* ccic used lane number; 0 means DVP mode */
int lane_clk;
+ /*
+ * clock tree support
+ */
+ char *clk_name[4];
+ int clk_num;
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
