Am 09.12.2012 18:53, schrieb Matthew Gyurgyik: > On 12/09/2012 12:06 PM, Frank Schäfer wrote: >> Forget this sh... (never do multiple things at the same time ;) ) >> >> Reg 0x50 is set to according to rc_type specified in the selected remote >> control map. >> So if the correct map is selected, everything should be fine (as long as >> it is RC_TYPE_NEC or RC_TYPE_RC5 because we don't support others yet). >> >> RC_MAP_KWORLD_315U and RC_MAP_MSI_DIGIVOX_III are both RC_TYPE_NEC, so >> the stick seems to use no NEC protocol. >> >> Matthew, insert a line >> >> ir_config = 0x01; >> >> before >> >> 380 em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1); >> >> in em28xx-input.c and see if something shows up in the dmesg output. >> >> Regards, >> Frank > > That seems to be a bit more successful! > > Here is the dmesg output: > >> [root@tux ~]# dmesg -t | sort | uniq | grep 'em28xx IR' | grep handle >> em28xx IR (em28xx #0)/ir: 6em28xx_ir_handle_key: toggle: 0, count: 1, >> key 0x61d6 >> em28xx IR (em28xx #0)/ir: 6em28xx_ir_handle_key: toggle: 0, count: 2, >> key 0x61d6 >> em28xx IR (em28xx #0)/ir: 6em28xx_ir_handle_key: toggle: 1, count: 1, >> key 0x61d6 >> em28xx IR (em28xx #0)/ir: em28xx_ir_handle_key: toggle: 0, count: 1, >> key 0x61d6 >> em28xx IR (em28xx #0)/ir: em28xx_ir_handle_key: toggle: 0, count: 2, >> key 0x61d6 >> em28xx IR (em28xx #0)/ir: em28xx_ir_handle_key: toggle: 1, count: 1, >> key 0x61d6 >> em28xx IR (em28xx #0)/ir: em28xx_ir_handle_key: toggle: 1, count: 2, >> key 0x61d6 > > I pressed all the buttons on the remote (40 buttons).
Did you cut the dmesg output ? Or do you really get these messages for key 0x61d6 only ? It seems like things are working different with reg 0x50 = 0x01. Taking a look into the datasheet might help, but I don't have it. ;) Regards, Frank > > Thanks, > Matthew -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
