On 12/14/12 19:26, Felipe Balbi wrote:
> Hi,
>
> On Fri, Dec 14, 2012 at 09:28:09AM -0800, Tony Lindgren wrote:
>> * Tony Lindgren <t...@atomide.com> [121120 12:00]:
>>> Hi,
>>>
>>> * Timo Kokkonen <timo.t.kokko...@iki.fi> [121118 07:15]:
>>>> --- a/drivers/media/rc/ir-rx51.c
>>>> +++ b/drivers/media/rc/ir-rx51.c
>>>> @@ -74,6 +74,19 @@ static void lirc_rx51_off(struct lirc_rx51 *lirc_rx51)
>>>> OMAP_TIMER_TRIGGER_NONE);
>>>> }
>>>>
>>>> +static void lirc_rx51_stop_tx(struct lirc_rx51 *lirc_rx51)
>>>> +{
>>>> + if (lirc_rx51->wbuf_index < 0)
>>>> + return;
>>>> +
>>>> + lirc_rx51_off(lirc_rx51);
>>>> + lirc_rx51->wbuf_index = -1;
>>>> + omap_dm_timer_stop(lirc_rx51->pwm_timer);
>>>> + omap_dm_timer_stop(lirc_rx51->pulse_timer);
>>>> + omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0);
>>>> + wake_up(&lirc_rx51->wqueue);
>>>> +}
>>>> +
>>>> static int init_timing_params(struct lirc_rx51 *lirc_rx51)
>>>> {
>>>> u32 load, match;
>>>
>>> Good fixes in general.. But you won't be able to access the
>>> omap_dm_timer functions after we enable ARM multiplatform support
>>> for omap2+. That's for v3.9 probably right after v3.8-rc1.
>>>
>>> We need to find some Linux generic API to use hardware timers
>>> like this, so I've added Thomas Gleixner and linux-arm-kernel
>>> mailing list to cc.
>>>
>>> If no such API is available, then maybe we can export some of
>>> the omap_dm_timer functions if Thomas is OK with that.
>>
>> Just to update the status on this.. It seems that we'll be moving
>> parts of plat/dmtimer into a minimal include/linux/timer-omap.h
>> unless people have better ideas on what to do with custom
>> hardware timers for PWM etc.
>
> if it's really for PWM, shouldn't we be using drivers/pwm/ ??
>
Now that Neil Brown posted the PWM driver for omap, I've been thinking
about whether converting the ir-rx51 into the PWM API would work. Maybe
controlling the PWM itself would be sufficient, but the ir-rx51 uses
also another dmtimer for creating accurate (enough) timing source for
the IR pulse edges.
I haven't tried whether the default 32kHz clock source is enough for
that. Now that I think about it, I don't see why it wouldn't be good
enough. I think it would even be possible to just use the PWM api alone
(plus hr-timers) in order to generate good enough IR pulses.
-Timo
> Meaning that $SUBJECT would just request a PWM device and use it. That
> doesn't solve the whole problem, however, as pwm-omap.c would still need
> access to timer-omap.h.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
