If the remote video sensor reports an interlaced video mode, the CCDC block
should configure itself appropriately.
---
drivers/media/platform/omap3isp/ispccdc.c | 16 ++++++++++++++--
include/media/omap3isp.h | 3 +++
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/omap3isp/ispccdc.c
b/drivers/media/platform/omap3isp/ispccdc.c
index 60e60aa..5443ef4 100644
--- a/drivers/media/platform/omap3isp/ispccdc.c
+++ b/drivers/media/platform/omap3isp/ispccdc.c
@@ -970,10 +970,11 @@ void omap3isp_ccdc_max_rate(struct isp_ccdc_device *ccdc,
* @ccdc: Pointer to ISP CCDC device.
* @pdata: Parallel interface platform data (may be NULL)
* @data_size: Data size
+ * @interlaced: Use interlaced mode instead of progressive mode
*/
static void ccdc_config_sync_if(struct isp_ccdc_device *ccdc,
struct isp_parallel_platform_data *pdata,
- unsigned int data_size)
+ unsigned int data_size, bool interlaced)
{
struct isp_device *isp = to_isp_device(ccdc);
const struct v4l2_mbus_framefmt *format;
@@ -1004,9 +1005,15 @@ static void ccdc_config_sync_if(struct isp_ccdc_device
*ccdc,
break;
}
+ if (interlaced)
+ syn_mode |= ISPCCDC_SYN_MODE_FLDMODE;
+
if (pdata && pdata->data_pol)
syn_mode |= ISPCCDC_SYN_MODE_DATAPOL;
+ if (pdata && pdata->fld_pol)
+ syn_mode |= ISPCCDC_SYN_MODE_FLDPOL;
+
if (pdata && pdata->hs_pol)
syn_mode |= ISPCCDC_SYN_MODE_HDPOL;
@@ -1111,6 +1118,7 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc)
const struct v4l2_rect *crop;
const struct isp_format_info *fmt_info;
struct v4l2_subdev_format fmt_src;
+ bool src_interlaced = false;
unsigned int depth_out;
unsigned int depth_in = 0;
struct media_pad *pad;
@@ -1132,6 +1140,10 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc)
fmt_src.pad = pad->index;
fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE;
if (!v4l2_subdev_call(sensor, pad, get_fmt, NULL, &fmt_src)) {
+ if (fmt_src.format.field == V4L2_FIELD_INTERLACED ||
+ fmt_src.format.field == V4L2_FIELD_INTERLACED_TB ||
+ fmt_src.format.field == V4L2_FIELD_INTERLACED_BT)
+ src_interlaced = true;
fmt_info = omap3isp_video_format_info(fmt_src.format.code);
depth_in = fmt_info->width;
}
@@ -1150,7 +1162,7 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc)
omap3isp_configure_bridge(isp, ccdc->input, pdata, shift, bridge);
- ccdc_config_sync_if(ccdc, pdata, depth_out);
+ ccdc_config_sync_if(ccdc, pdata, depth_out, src_interlaced);
syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
diff --git a/include/media/omap3isp.h b/include/media/omap3isp.h
index 9584269..32d85c2 100644
--- a/include/media/omap3isp.h
+++ b/include/media/omap3isp.h
@@ -57,6 +57,8 @@ enum {
* ISP_LANE_SHIFT_6 - CAMEXT[13:6] -> CAM[7:0]
* @clk_pol: Pixel clock polarity
* 0 - Sample on rising edge, 1 - Sample on falling edge
+ * @fld_pol: Field identification signal polarity
+ * 0 - Active high, 1 - Active low
* @hs_pol: Horizontal synchronization polarity
* 0 - Active high, 1 - Active low
* @vs_pol: Vertical synchronization polarity
@@ -67,6 +69,7 @@ enum {
struct isp_parallel_platform_data {
unsigned int data_lane_shift:2;
unsigned int clk_pol:1;
+ unsigned int fld_pol:1;
unsigned int hs_pol:1;
unsigned int vs_pol:1;
unsigned int data_pol:1;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
