On Lunes, 11 de febrero de 2013 14:48:18 Jose Alberto Reguero escribió:
> On Domingo, 10 de febrero de 2013 22:11:53 Antti Palosaari escribió:
> > On 02/10/2013 09:43 PM, Jose Alberto Reguero wrote:
> > > This patch block the i2c tuner reads for Avermedia Twinstar. If it's
> > > needed other pids can be added.
> > >
> > > Signed-off-by: Jose Alberto Reguero <jaregu...@telefonica.net>
> > >
> > > diff -upr linux/drivers/media/usb/dvb-usb-v2/af9035.c
> > > linux.new/drivers/media/usb/dvb-usb-v2/af9035.c ---
> > > linux/drivers/media/usb/dvb-usb-v2/af9035.c 2013-01-07
> > > 05:45:57.000000000 +0100 +++
> > > linux.new/drivers/media/usb/dvb-usb-v2/af9035.c 2013-02-08
> > > 22:55:08.304089054 +0100 @@ -232,7 +232,11 @@ static int
> > > af9035_i2c_master_xfer(struct
> > >
> > > buf[3] = 0x00; /* reg addr MSB */
> > > buf[4] = 0x00; /* reg addr LSB */
> > > memcpy(&buf[5], msg[0].buf, msg[0].len);
> > >
> > > - ret = af9035_ctrl_msg(d, &req);
> > > + if (state->block_read) {
> > > + msg[1].buf[0] = 0x3f;
> > > + ret = 0;
> > > + } else
> > > + ret = af9035_ctrl_msg(d, &req);
> > >
> > > }
> > >
> > > } else if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
> > >
> > > if (msg[0].len > 40) {
> > >
> > > @@ -638,6 +642,17 @@ static int af9035_read_config(struct dvb
> > >
> > > for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++)
> > >
> > > state->af9033_config[i].clock = clock_lut[tmp];
> > >
> > > + state->block_read = false;
> > > +
> > > + if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA &&
> > > + le16_to_cpu(d->udev->descriptor.idProduct) ==
> > > + USB_PID_AVERMEDIA_TWINSTAR) {
> > > + dev_dbg(&d->udev->dev,
> > > + "%s: AverMedia Twinstar: block i2c read from
> > > tuner\n",
> > > + __func__);
> > > + state->block_read = true;
> > > + }
> > > +
> > >
> > > return 0;
> > >
> > > err:
> > > diff -upr linux/drivers/media/usb/dvb-usb-v2/af9035.h
> > > linux.new/drivers/media/usb/dvb-usb-v2/af9035.h ---
> > > linux/drivers/media/usb/dvb-usb-v2/af9035.h 2013-01-07
> > > 05:45:57.000000000 +0100 +++
> > > linux.new/drivers/media/usb/dvb-usb-v2/af9035.h 2013-02-08
> > > 22:52:42.293842710 +0100 @@ -54,6 +54,7 @@ struct usb_req {
> > >
> > > struct state {
> > >
> > > u8 seq; /* packet sequence number */
> > > bool dual_mode;
> > >
> > > + bool block_read;
> > >
> > > struct af9033_config af9033_config[2];
> > >
> > > };
> >
> > Could you test if faking tuner ID during attach() is enough?
> >
> > Also, I would like to know what is returned error code from firmware
> > when it fails. Enable debugs to see it. It should print something like
> > that: af9035_ctrl_msg: command=03 failed fw error=2
> >
> >
> > diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c
> > b/drivers/media/usb/dvb-usb-v2/af9035.c
> > index a1e953a..5a4f28d 100644
> > --- a/drivers/media/usb/dvb-usb-v2/af9035.c
> > +++ b/drivers/media/usb/dvb-usb-v2/af9035.c
> > @@ -1082,9 +1082,22 @@ static int af9035_tuner_attach(struct
> > dvb_usb_adapter *adap)
> >
> > tuner_addr = 0x60 | 0x80; /* I2C bus hack */
> >
> > }
> >
> > + // fake used tuner for demod firmware / i2c adapter
> > + if (adap->id == 0)
> > + ret = af9035_wr_reg(d, 0x00f641,
> > AF9033_TUNER_FC0011);
> > + else
> > + ret = af9035_wr_reg(d, 0x10f641,
> > AF9033_TUNER_FC0011);
> > +
> >
> > /* attach tuner */
> > fe = dvb_attach(mxl5007t_attach, adap->fe[0],
> > &d->i2c_adap,
> >
> > tuner_addr,
> >
> > &af9035_mxl5007t_config[adap->id]);
> > +
> > + // return correct tuner
> > + if (adap->id == 0)
> > + ret = af9035_wr_reg(d, 0x00f641,
> > AF9033_TUNER_MXL5007T);
> > + else
> > + ret = af9035_wr_reg(d, 0x10f641,
> > AF9033_TUNER_MXL5007T);
> > +
> >
> > break;
> >
> > case AF9033_TUNER_TDA18218:
> > /* attach tuner */
> >
> > regards
> > Antti
>
> I will try with fake tuner, but I can't test unil next weekend.
> If I remember, the read operation is performed, and return good value,
> but after that, all the i2c transfers fail. Seee:
>
> http://www.mail-archive.com/linux-media@vger.kernel.org/msg56346.html
>
> Jose Alberto
>
>
I tried with fake tuner without success:
[ 1346.707405] DVB: registering new adapter (AVerMedia Twinstar (A825))
[ 1346.959043] i2c i2c-1: af9033: firmware version: LINK=11.5.9.0
OFDM=5.17.9.1
[ 1346.962920] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9033
(DVB-T))...
[ 1347.439354] mxl5007t 1-0060: creating new instance
[ 1347.440644] mxl5007t_get_chip_id: unknown rev (3f)
[ 1347.440652] mxl5007t_get_chip_id: MxL5007T detected @ 1-0060
[ 1347.443023] mxl5007t_write_reg: 472: failed!
[ 1347.443031] mxl5007t_attach: error -121 on line 903
[ 1347.443790] usb 1-2: dvb_usb_v2: 'AVerMedia Twinstar (A825)' error while
loading driver (-19)
[ 1347.446624] usb 1-2: dvb_usb_v2: 'AVerMedia Twinstar (A825)' successfully
deinitialized and disconnected
Jose Alberto
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
