2013/3/20 Vikas Sajjan <vikas.saj...@linaro.org>:
> While migrating to common clock framework (CCF), found that the FIMD clocks
> were pulled down by the CCF.
> If CCF finds any clock(s) which has NOT been claimed by any of the
> drivers, then such clock(s) are PULLed low by CCF.
>
> By calling clk_prepare_enable() for FIMD clocks fixes the issue.
>
> this patch also replaces clk_disable() with clk_disable_unprepare()
> during exit.
>
> Signed-off-by: Vikas Sajjan <vikas.saj...@linaro.org>
> ---
> Changes since v1:
>         - added error checking for clk_prepare_enable() and also replaced
>         clk_disable() with clk_disable_unprepare() during exit.
> ---
>  drivers/gpu/drm/exynos/exynos_drm_fimd.c |   17 +++++++++++++++--
>  1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c 
> b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> index 9537761..014d750 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> @@ -934,6 +934,19 @@ static int fimd_probe(struct platform_device *pdev)
>                 return ret;
>         }
>
> +       ret = clk_prepare_enable(ctx->lcd_clk);
> +       if (ret) {
> +               dev_err(dev, "failed to enable 'sclk_fimd' clock\n");
> +               return ret;
> +       }
> +
> +       ret = clk_prepare_enable(ctx->bus_clk);
> +       if (ret) {
> +               clk_disable_unprepare(ctx->lcd_clk);
> +               dev_err(dev, "failed to enable 'fimd' clock\n");
> +               return ret;
> +       }
> +

Please remove the above two clk_prepare_enable function calls and use
them in fimd_clock() instead of clk_enable/disable(). When probed,
fimd clock will be enabled by runtime pm.

Thanks,
Inki Dae

>         ctx->vidcon0 = pdata->vidcon0;
>         ctx->vidcon1 = pdata->vidcon1;
>         ctx->default_win = pdata->default_win;
> @@ -981,8 +994,8 @@ static int fimd_remove(struct platform_device *pdev)
>         if (ctx->suspended)
>                 goto out;
>
> -       clk_disable(ctx->lcd_clk);
> -       clk_disable(ctx->bus_clk);
> +       clk_disable_unprepare(ctx->lcd_clk);
> +       clk_disable_unprepare(ctx->bus_clk);
>
>         pm_runtime_set_suspended(dev);
>         pm_runtime_put_sync(dev);
> --
> 1.7.9.5
>
> _______________________________________________
> dri-devel mailing list
> dri-de...@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to