The Windows driver also probes at least two further i2c addresses (0x22 >> 1
and 0x66 >> 1). I've got some hints that they are very likely used by Samsung
and Kodak sensors, which are known to be used in Empia devices, too.
We havn't seen any devices using these sensors yet and don't know how to probe
them properly, so leave a comment.
Signed-off-by: Frank Schäfer <fschaefer....@googlemail.com>
---
drivers/media/usb/em28xx/em28xx-camera.c | 5 +++++
1 Datei geändert, 5 Zeilen hinzugefügt(+)
diff --git a/drivers/media/usb/em28xx/em28xx-camera.c
b/drivers/media/usb/em28xx/em28xx-camera.c
index e8b3322..64b70d4 100644
--- a/drivers/media/usb/em28xx/em28xx-camera.c
+++ b/drivers/media/usb/em28xx/em28xx-camera.c
@@ -301,6 +301,11 @@ int em28xx_detect_sensor(struct em28xx *dev)
if (dev->em28xx_sensor == EM28XX_NOSENSOR && ret < 0)
ret = em28xx_probe_sensor_omnivision(dev);
+ /*
+ * NOTE: the Windows driver also probes i2c addresses
+ * 0x22 (Samsung ?) and 0x66 (Kodak ?)
+ */
+
if (dev->em28xx_sensor == EM28XX_NOSENSOR && ret < 0) {
em28xx_info("No sensor detected\n");
return -ENODEV;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
