On Mon, Apr 29, 2013 at 10:41:09PM +0200, Jon Arne Jørgensen wrote:
>
> Signed-off-by: Jon Arne Jørgensen <jona...@jonarne.no>
Every patch *must* have a proper commit message indicating what you're doing
and why you're doing it.
In particular, please add as much information as you can about this new clone
decoder.
If you know *why* we have to add those quirks for PAL and NTSC, it would
be nice to add that information to the commit message and maybe even
in a comment somewhere in the code.
> ---
> drivers/media/i2c/saa7115.c | 48
> ++++++++++++++++++++++++++++++++++++---------
> 1 file changed, 39 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
> index eb2c19d..77c13dc 100644
> --- a/drivers/media/i2c/saa7115.c
> +++ b/drivers/media/i2c/saa7115.c
> @@ -126,6 +126,8 @@ static int saa711x_has_reg(const int id, const u8 reg)
> return 0;
>
> switch (id) {
> + case V4L2_IDENT_GM7113C:
> + return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && reg < 0x20;
> case V4L2_IDENT_SAA7113:
> return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20
> || reg > 0x3f) &&
> reg != 0x5d && reg < 0x63;
> @@ -447,6 +449,30 @@ static const unsigned char saa7115_cfg_50hz_video[] = {
>
> /* ============== SAA7715 VIDEO templates (end) ======= */
>
> +/* ============== GM7113C VIDEO templates ============= */
> +static const unsigned char gm7113c_cfg_60hz_video[] = {
> + R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 =
> NTSC */
> + R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */
> +
> +#if 0
> + R_5A_V_OFF_FOR_SLICER, 0x06, /* standard 60hz value for
> ITU656 line counting */
> +#endif
What's the meaning of this ifdef? In general it's better to remove dead
code, or at least to put some fat comment about it.
> + 0x00, 0x00
> +};
> +
> +static const unsigned char gm7113c_cfg_50hz_video[] = {
> + R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */
> + R_0E_CHROMA_CNTL_1, 0x07,
> +
> +#if 0
> + R_5A_V_OFF_FOR_SLICER, 0x03, /* standard 50hz value */
> +#endif
Ditto.
I've tested this with an stk1160/gm7113c device and now
it's working fine (NTSC, PAL-M, PAL-Nc).
I also tested against regressions using stk1160/saa7113 and
em28xx/saa7115 devices.
I must admit I'm quite happy to have this issue finally fixed!
Could you please re-send the whole series, taking account of this
comments. You can add my:
Tested-by: Ezequiel Garcia <ezequiel.gar...@free-electrons.com>
to every patch in the series.
Thanks!
--
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
