Hi Sylwester,
Thank you for the review.
On Fri, Jun 21, 2013 at 4:34 AM, Sylwester Nawrocki
<sylvester.nawro...@gmail.com> wrote:
> On 05/31/2013 03:03 PM, Arun Kumar K wrote:
>>
>> FIMC-IS uses certain sensors which are exclusively controlled
>> from the IS firmware. This patch adds the sensor subdev for the
>> fimc-is sensors.
>>
>> Signed-off-by: Arun Kumar K<arun...@samsung.com>
>> Signed-off-by: Kilyeon Im<kilyeon...@samsung.com>
>> ---
>> drivers/media/platform/exynos5-is/fimc-is-sensor.c | 463
>> ++++++++++++++++++++
>> drivers/media/platform/exynos5-is/fimc-is-sensor.h | 168 +++++++
>> 2 files changed, 631 insertions(+)
>> create mode 100644 drivers/media/platform/exynos5-is/fimc-is-sensor.c
>> create mode 100644 drivers/media/platform/exynos5-is/fimc-is-sensor.h
>>
>> diff --git a/drivers/media/platform/exynos5-is/fimc-is-sensor.c
>> b/drivers/media/platform/exynos5-is/fimc-is-sensor.c
>> new file mode 100644
>> index 0000000..b8fb834
>> --- /dev/null
>> +++ b/drivers/media/platform/exynos5-is/fimc-is-sensor.c
>> @@ -0,0 +1,463 @@
>> +/*
>> + * Samsung EXYNOS5250 FIMC-IS (Imaging Subsystem) driver
>> + *
>> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
>> + * Arun Kumar K<arun...@samsung.com>
>> + * Kil-yeon Lim<kilyeon...@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include<linux/gpio.h>
>> +#include<linux/of_gpio.h>
>> +#include<linux/i2c.h>
>> +#include<linux/of.h>
>> +#include<linux/of_platform.h>
>> +#include<media/v4l2-of.h>
>> +#include "fimc-is-sensor.h"
>> +#include "fimc-is.h"
>> +
>> +#define DRIVER_NAME "fimc-is-sensor"
>> +
>> +static char *sensor_clock_name[] = {
>> + [SCLK_BAYER] = "sclk_bayer",
>> + [SCLK_CAM0] = "sclk_cam0",
>> + [SCLK_CAM1] = "sclk_cam1",
>> +};
>> +
>> +/* Sensor supported formats */
>> +static struct v4l2_mbus_framefmt sensor_formats[FIMC_IS_MAX_SENSORS] = {
>> + [SENSOR_S5K4E5] = {
>> + .width = SENSOR_4E5_WIDTH + 16,
>> + .height = SENSOR_4E5_HEIGHT + 10,
>> + .code = V4L2_MBUS_FMT_SGRBG10_1X10,
>> + .field = V4L2_FIELD_NONE,
>> + .colorspace = V4L2_COLORSPACE_SRGB,
>> + },
>> + [SENSOR_S5K6A3] = {
>> + .width = SENSOR_6A3_WIDTH + 16,
>> + .height = SENSOR_6A3_HEIGHT + 10,
>> + .code = V4L2_MBUS_FMT_SGRBG10_1X10,
>> + .field = V4L2_FIELD_NONE,
>> + .colorspace = V4L2_COLORSPACE_SRGB,
>> + },
>> +};
>> +
>> +static struct fimc_is_sensor *sd_to_fimc_is_sensor(struct v4l2_subdev
>> *sd)
>> +{
>> + return container_of(sd, struct fimc_is_sensor, subdev);
>> +}
>> +
>> +static void sensor_clk_put(struct fimc_is_sensor *sensor)
>> +{
>> + int i;
>> +
>> + for (i = 0; i< SCLK_MAX_NUM; i++) {
>> + if (IS_ERR(sensor->clock[i]))
>> + continue;
>> + clk_unprepare(sensor->clock[i]);
>> + clk_put(sensor->clock[i]);
>> + sensor->clock[i] = ERR_PTR(-EINVAL);
>> + }
>> +}
>> +
>> +static int sensor_clk_init(struct fimc_is_sensor *sensor)
>> +{
>> + int i, ret;
>> +
>> + /* Get CAM clocks */
>> + for (i = 0; i< SCLK_MAX_NUM; i++) {
>> + sensor->clock[i] = clk_get(NULL, sensor_clock_name[i]);
>> + if (IS_ERR(sensor->clock[i]))
>> + goto err;
>> + ret = clk_prepare(sensor->clock[i]);
>> + if (ret< 0) {
>> + clk_put(sensor->clock[i]);
>> + sensor->clock[i] = ERR_PTR(-EINVAL);
>> + goto err;
>> + }
>> + }
>> +
>> + /* Set clock rates */
>> + ret = clk_set_rate(sensor->clock[SCLK_CAM0], 24 * 1000000);
>> + ret |= clk_set_rate(sensor->clock[SCLK_BAYER], 24 * 1000000);
>
>
> Please don't obfuscate the return value.
>
>
Ok
>> + if (ret) {
>> + pr_err("Failed to set cam clock rates\n");
>> + goto err;
>> + }
>> + return 0;
>> +err:
>> + sensor_clk_put(sensor);
>> + pr_err("Failed to init sensor clock\n");
>> + return -ENXIO;
>
>
>> +}
>> +
>> +static int sensor_clk_enable(struct fimc_is_sensor *sensor)
>> +{
>> + int ret = 0, i;
>> +
>> + for (i = 0; i< SCLK_MAX_NUM; i++) {
>> + ret = clk_enable(sensor->clock[i]);
>> + if (ret)
>> + return ret;
>> + }
>
>
> Oh, so you enable all clocks in this driver ? Is it really flexible
> enough ? What if one of these clocks is connected to some external
> sensor with an ISP ? Are this clocks going to be managed/exposed by
> the media device driver as well ?
>
I was hoping that this driver can handle all its clocks as exposed
from the DT. I can see that in exynos4, the media device enables the
cam clocks. In exynos5, there are multiple frequency settings
possible on these clocks depending on modes of operation.
So isn't it better that the sensor driver controls it?
>> + return ret;
>> +}
>> +
>> +static void sensor_clk_disable(struct fimc_is_sensor *sensor)
>> +{
>> + int i;
>> +
>> + for (i = 0; i< SCLK_MAX_NUM; i++)
>> + clk_disable(sensor->clock[i]);
>> +}
>> +
>> +static int sensor_enum_mbus_code(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_fh *fh,
>> + struct v4l2_subdev_mbus_code_enum *code)
>> +{
>> + struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
>> + struct fimc_is_sensor_drv_data *sdata = sensor->drvdata;
>> +
>> + if (!code)
>> + return -EINVAL;
>> +
>> + code->code = sensor_formats[sdata->sensor_id].code;
>> + return 0;
>> +}
>> +
>> +static int sensor_set_fmt(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_fh *fh,
>> + struct v4l2_subdev_format *fmt)
>> +{
>> + struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
>> + struct fimc_is_sensor_drv_data *sdata = sensor->drvdata;
>> + struct v4l2_mbus_framefmt *sfmt =&fmt->format;
>>
>> +
>> + if ((sfmt->width != sensor_formats[sdata->sensor_id].width) ||
>> + (sfmt->height != sensor_formats[sdata->sensor_id].height)
>> ||
>> + (sfmt->code != sensor_formats[sdata->sensor_id].code))
>
>
> Couldn't this check be just dropped ?
>
>
Yes will remove it.
>> + *sfmt = sensor_formats[sdata->sensor_id];
>> +
>> + return 0;
>> +}
>> +
>> +static int sensor_get_fmt(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_fh *fh,
>> + struct v4l2_subdev_format *fmt)
>> +{
>> + struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
>> + struct fimc_is_sensor_drv_data *sdata = sensor->drvdata;
>> +
>> + fmt->format = sensor_formats[sdata->sensor_id];
>> + return 0;
>> +}
>> +
>> +static struct v4l2_subdev_pad_ops sensor_pad_ops = {
>> + .enum_mbus_code = sensor_enum_mbus_code,
>> + .get_fmt = sensor_get_fmt,
>> + .set_fmt = sensor_set_fmt,
>> +};
>> +
>> +static int sensor_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
>> +{
>> + struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh,
>> 0);
>> +
>> + *format = sensor_formats[0];
>> + return 0;
>> +}
>> +
>> +static const struct v4l2_subdev_internal_ops sensor_sd_internal_ops = {
>> + .open = sensor_open,
>> +};
>> +
>> +static int sensor_s_power(struct v4l2_subdev *sd, int on)
>> +{
>> + struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
>> +
>> + if (on) {
>> + /* Power on sensor */
>> + sensor_clk_enable(sensor);
>
>
> The return value from at least this function should not be ignored.
>
>
Ok
>> + gpio_set_value(sensor->gpio_reset, 1);
>> + } else {
>> + /* Power off sensor */
>> + gpio_set_value(sensor->gpio_reset, 0);
>> + sensor_clk_disable(sensor);
>> + }
>> + return 0;
>> +}
>> +
>> +static struct v4l2_subdev_core_ops sensor_core_ops = {
>> + .s_power = sensor_s_power,
>> +};
>> +
>> +static int sensor_s_stream(struct v4l2_subdev *sd, int enable)
>> +{
>> + struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
>> + int ret;
>> +
>> + if (enable) {
>> + pr_debug("Stream ON\n");
>> + /* Open pipeline */
>> + ret = fimc_is_pipeline_open(sensor->pipeline, sensor);
>> + if (ret< 0) {
>> + pr_err("Pipeline already opened.\n");
>> + return -EBUSY;
>> + }
>
>
> 'fimc_is_pipeline_' might be a bit confusing prefix for these FIMC-IS
> firmware interface functions, perhaps fimc_ischain_ or something similar
> would be more explicit. But that's just my personal impression, let's
> don't bother with it.
>
>
Yes I too feel that name pipeline is confusion. Will change it to ischain.
>> + /* Start IS pipeline */
>> + ret = fimc_is_pipeline_start(sensor->pipeline);
>
>
> OK, using the FIMC-IS firmware interface calls from within the subdev
> drivers is fine. But does the whole pipeline need to be initialized,
> the firmware and the setfile loaded and devices powered on from within
> the sensor's subdev s_stream() operation ?
>
> This is what really bother me most in the current design. Why couldn't
> the media device driver handle dependencies between the subdevs, e.g.
> when sensor -> mipi-csis -> fimc-lite -> memory processing pipeline is
> started, couldn't it call s_power/s_stream on the ISP subdev when those
> calls are made on the sensor subdev ?
>
>
The firmware initialization is done here so that fimc-is sensor can be
used even without the fimc-is components (isp, scc, scp). There is a
possibility of only the pipeline0 being used by the media device which
connects sensor -> mipi csis -> fimc-lite -> memory.
In such a scenario, for using the IS sensor independently, the firmware
should be initialized and started for the sensor to give image output.
>> + if (ret< 0) {
>> + pr_err("Pipeline start failed.\n");
>> + return -EINVAL;
>
>
> return ret; ?
>>
>> + }
>> + } else {
>> + pr_debug("Stream OFF\n");
>> + /* Stop IS pipeline */
>> + ret = fimc_is_pipeline_stop(sensor->pipeline);
>> + if (ret< 0) {
>> + pr_err("Pipeline stop failed.\n");
>> + return -EINVAL;
>
>
> return ret; ?
>>
>> + }
>> +
>> + /* Close pipeline */
>> + ret = fimc_is_pipeline_close(sensor->pipeline);
>> + if (ret< 0) {
>> + pr_err("Pipeline close failed\n");
>> + return -EBUSY;
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct v4l2_subdev_video_ops sensor_video_ops = {
>> + .s_stream = sensor_s_stream,
>> +};
>> +
>> +static struct v4l2_subdev_ops sensor_subdev_ops = {
>> + .core =&sensor_core_ops,
>> + .pad =&sensor_pad_ops,
>> + .video =&sensor_video_ops,
>> +};
>> +
>> +static int sensor_parse_dt(struct fimc_is_sensor *sensor,
>> + struct device_node *sensor_node)
>> +{
>> + struct device_node *port, *ep, *remote, *fimc_is_node, *camera;
>> + struct fimc_is *is_data;
>> + struct platform_device *pdev_is;
>> + struct v4l2_of_endpoint endpoint;
>
>
>> + /* Parse ports */
>>
>> + port = sensor_node;
>> + while ((port = of_get_next_child(port, NULL))) {
>> + if (!of_node_cmp(port->name, "port"))
>> + break;
>> + of_node_put(port);
>> + };
>> + if (!port) {
>> + pr_err("Sensor port undefined\n");
>> + return -EINVAL;
>> + }
>> +
>> + ep = of_get_next_child(port, NULL);
>> + if (!ep)
>> + return -EINVAL;
>> +
>> + port = of_parse_phandle(ep, "remote-endpoint", 0);
>> + if (port) {
>> + v4l2_of_parse_endpoint(port,&endpoint);
>> + sensor->i2c_ch = (endpoint.port>> 2)& 0x1;
>> + }
>
>
> Couldn't some of this code be replaced with v4l2_of_get_next_endpoint() ?
>
Ok will try that.
>> + remote = v4l2_of_get_remote_port_parent(ep);
>> + of_node_put(ep);
>> +
>> + if (!remote)
>> + return -EINVAL;
>> +
>> + camera = of_get_parent(remote);
>> + fimc_is_node = NULL;
>> + while ((fimc_is_node = of_get_next_child(camera, fimc_is_node))) {
>> + if (!of_node_cmp(fimc_is_node->name, "fimc-is"))
>> + break;
>> + of_node_put(fimc_is_node);
>> + };
>> + of_node_put(camera);
>> +
>> + if (!fimc_is_node)
>> + return -EINVAL;
>> +
>> + /* Get the IS pipeline context */
>> + pdev_is = of_find_device_by_node(fimc_is_node);
>> + is_data = dev_get_drvdata(&pdev_is->dev);
>> +
>> + if (!is_data)
>> + return -EINVAL;
>> +
>> + sensor->pipeline =&is_data->pipeline;
>>
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id fimc_is_sensor_of_match[];
>> +
>> +static int fimc_is_sensor_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct device *dev =&client->dev;
>>
>> + struct fimc_is_sensor *sensor;
>> + const struct of_device_id *of_id;
>> + struct v4l2_subdev *sd;
>> + int gpio, ret;
>> + unsigned int sensor_id;
>> +
>> + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
>> + if (!sensor)
>> + return -ENOMEM;
>> +
>> + sensor->gpio_reset = -EINVAL;
>> +
>> + gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
>> + if (gpio_is_valid(gpio)) {
>> + ret = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW,
>> DRIVER_NAME);
>
>
> You could use devm_gpio_request_one, so the GPIO is properly freed on
> the driver's removal. You should test this driver built as a module as well.
>
>
Ok will do that.
>> + if (ret< 0)
>> + return ret;
>> + }
>> + pr_err("GPIO Request success : %d", gpio);
>
>
> pr_debug() or needs to be removed.
>
>
>> + sensor->gpio_reset = gpio;
>> +
>> + of_id = of_match_node(fimc_is_sensor_of_match, dev->of_node);
>> + if (!of_id) {
>> + ret = -ENODEV;
>> + goto err_gpio;
>> + }
>> +
>> + sensor->drvdata = (struct fimc_is_sensor_drv_data *) of_id->data;
>
>
> No need for casting. Just make struct fimc_is_sensor:drvdata 'const'.
>
>
Ok
>> + sensor->dev = dev;
>> +
>> + /* Get FIMC-IS context */
>> + ret = sensor_parse_dt(sensor, dev->of_node);
>> + if (ret) {
>> + pr_err("Unable to obtain IS context\n");
>> + ret = -ENODEV;
>
>
> Is overwriting ret really needed ?
>
Not needed. Will change.
>> + goto err_gpio;
>> + }
>> +
>> + sd =&sensor->subdev;
>> + v4l2_i2c_subdev_init(sd, client,&sensor_subdev_ops);
>> + snprintf(sd->name, sizeof(sd->name),
>> sensor->drvdata->sensor_name);
>> + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>> +
>> + sensor_id = sensor->drvdata->sensor_id;
>> + sensor->format.code = sensor_formats[sensor_id].code;
>> + sensor->format.width = sensor_formats[sensor_id].width;
>> + sensor->format.height = sensor_formats[sensor_id].height;
>> +
>> + sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
>> + ret = media_entity_init(&sd->entity, 1,&sensor->pad, 0);
>>
>> + if (ret< 0)
>> + goto err_gpio;
>> +
>> + v4l2_set_subdevdata(sd, sensor);
>> + i2c_set_clientdata(client,&sensor->subdev);
>>
>> +
>> + pm_runtime_no_callbacks(dev);
>> + pm_runtime_enable(dev);
>> + sensor_clk_init(sensor);
>> +
>> + return 0;
>> +err_gpio:
>> + if (gpio_is_valid(sensor->gpio_reset))
>> + gpio_free(sensor->gpio_reset);
>> + return ret;
>> +}
>> +
>> +static int fimc_is_sensor_remove(struct i2c_client *client)
>> +{
>> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
>> + struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
>> +
>> + media_entity_cleanup(&sensor->subdev.entity);
>> + sensor_clk_put(sensor);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct i2c_device_id fimc_is_sensor_ids[] = {
>> + { }
>> +};
>> +
>> +static const struct fimc_is_sensor_drv_data s5k4e5_drvdata = {
>> + .sensor_id = SENSOR_S5K4E5,
>> + .sensor_name = "s5k4e5",
>> + .pixel_width = SENSOR_4E5_WIDTH + 16,
>> + .pixel_height = SENSOR_4E5_HEIGHT + 10,
>> + .active_width = SENSOR_4E5_WIDTH,
>> + .active_height = SENSOR_4E5_HEIGHT,
>> + .max_framerate = 30,
>> + .setfile_name = "setfile_4e5.bin",
>> + .ext = {
>> + .actuator_con = {
>> + .product_name = ACTUATOR_NAME_DWXXXX,
>> + .peri_type = SE_I2C,
>> + .peri_setting.i2c.channel = SENSOR_CONTROL_I2C0,
>> + },
>> + .flash_con = {
>> + .product_name = FLADRV_NAME_KTD267,
>> + .peri_type = SE_GPIO,
>> + .peri_setting.gpio.first_gpio_port_no = 1,
>> + .peri_setting.gpio.second_gpio_port_no = 2,
>> + },
>> + .from_con.product_name = FROMDRV_NAME_NOTHING,
>> + .mclk = 0,
>> + .mipi_lane_num = 0,
>> + .mipi_speed = 0,
>> + .fast_open_sensor = 0,
>> + .self_calibration_mode = 0,
>> + },
>> +};
>> +
>> +static const struct fimc_is_sensor_drv_data s5k6a3_drvdata = {
>> + .sensor_id = SENSOR_S5K6A3,
>> + .sensor_name = "s5k6a3",
>> + .pixel_width = SENSOR_6A3_WIDTH + 16,
>> + .pixel_height = SENSOR_6A3_HEIGHT + 10,
>> + .active_width = SENSOR_6A3_WIDTH,
>> + .active_height = SENSOR_6A3_HEIGHT,
>> + .max_framerate = 30,
>> + .setfile_name = "setfile_6a3.bin",
>> +};
>> +
>> +static const struct of_device_id fimc_is_sensor_of_match[] = {
>> + {
>> + .compatible = "samsung,s5k4e5",
>> + .data =&s5k4e5_drvdata,
>> + },
>> + {
>> + .compatible = "samsung,s5k6a3",
>> + .data =&s5k6a3_drvdata,
>> + },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, fimc_is_sensor_of_match);
>> +
>> +static struct i2c_driver fimc_is_sensor_driver = {
>> + .driver = {
>> + .of_match_table = fimc_is_sensor_of_match,
>> + .name = DRIVER_NAME,
>> + .owner = THIS_MODULE,
>> + },
>> + .probe = fimc_is_sensor_probe,
>> + .remove = fimc_is_sensor_remove,
>> + .id_table = fimc_is_sensor_ids,
>> +};
>> +
>> +module_i2c_driver(fimc_is_sensor_driver);
>> +
>> +MODULE_AUTHOR("Arun Kumar K<arun...@samsung.com>");
>> +MODULE_DESCRIPTION("Exynos5 FIMC-IS sensor subdev driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/media/platform/exynos5-is/fimc-is-sensor.h
>> b/drivers/media/platform/exynos5-is/fimc-is-sensor.h
>> new file mode 100644
>> index 0000000..75e5f20
>> --- /dev/null
>> +++ b/drivers/media/platform/exynos5-is/fimc-is-sensor.h
>> @@ -0,0 +1,168 @@
>> +/*
>> + * Samsung EXYNOS5250 FIMC-IS (Imaging Subsystem) driver
>> + *
>> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
>> + * Arun Kumar K<arun...@samsung.com>
>> + * Kil-yeon Lim<kilyeon...@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +#ifndef FIMC_IS_SENSOR_H_
>> +#define FIMC_IS_SENSOR_H_
>> +
>> +#include<linux/clk.h>
>> +#include<linux/device.h>
>> +#include<linux/kernel.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/regulator/consumer.h>
>> +#include<linux/videodev2.h>
>> +#include<media/v4l2-subdev.h>
>> +
>> +#include "fimc-is-pipeline.h"
>> +
>> +#define FIMC_IS_MAX_CAMIF_CLIENTS 2
>> +#define FIMC_IS_MAX_NAME_LEN 32
>> +#define FIMC_IS_MAX_GPIO_NUM 32
>> +#define UART_ISP_SEL 0
>> +#define UART_ISP_RATIO 1
>> +
>> +#define FIMC_IS_MAX_SENSORS 4
>> +
>> +#define SENSOR_4E5_WIDTH 2560
>> +#define SENSOR_4E5_HEIGHT 1920
>> +#define SENSOR_6A3_WIDTH 1392
>> +#define SENSOR_6A3_HEIGHT 1392
>> +
>> +enum sensor_id {
>> + SENSOR_S5K3H2 = 1,
>> + SENSOR_S5K6A3 = 2,
>> + SENSOR_S5K4E5 = 3,
>> + SENSOR_S5K3H7 = 4,
>> + SENSOR_CUSTOM = 100,
>> + SENSOR_END
>> +};
>> +
>> +enum sensor_channel {
>> + SENSOR_CONTROL_I2C0 = 0,
>> + SENSOR_CONTROL_I2C1 = 1
>> +};
>> +
>> +enum actuator_name {
>> + ACTUATOR_NAME_AD5823 = 1,
>> + ACTUATOR_NAME_DWXXXX = 2,
>> + ACTUATOR_NAME_AK7343 = 3,
>> + ACTUATOR_NAME_HYBRIDVCA = 4,
>> + ACTUATOR_NAME_NOTHING = 100,
>> + ACTUATOR_NAME_END
>> +};
>> +
>> +enum flash_drv_name {
>> + FLADRV_NAME_KTD267 = 1,
>> + FLADRV_NAME_NOTHING = 100,
>> + FLADRV_NAME_END
>> +};
>> +
>> +enum from_name {
>> + FROMDRV_NAME_W25Q80BW = 1,
>> + FROMDRV_NAME_NOTHING
>> +};
>> +
>> +enum sensor_peri_type {
>> + SE_I2C,
>> + SE_SPI,
>> + SE_GPIO,
>> + SE_MPWM,
>> + SE_ADC,
>> + SE_NULL
>> +};
>> +
>> +struct i2c_type {
>> + u32 channel;
>> + u32 slave_address;
>> + u32 speed;
>> +};
>> +
>> +struct spi_type {
>> + u32 channel;
>> +};
>> +
>> +struct gpio_type {
>> + u32 first_gpio_port_no;
>> + u32 second_gpio_port_no;
>> +};
>> +
>> +union sensor_peri_format {
>> + struct i2c_type i2c;
>> + struct spi_type spi;
>> + struct gpio_type gpio;
>> +};
>> +
>> +struct sensor_protocol {
>> + unsigned int product_name;
>> + enum sensor_peri_type peri_type;
>> + union sensor_peri_format peri_setting;
>> +};
>> +
>> +struct fimc_is_sensor_ext {
>> + struct sensor_protocol actuator_con;
>> + struct sensor_protocol flash_con;
>> + struct sensor_protocol from_con;
>> +
>> + unsigned int mclk;
>> + unsigned int mipi_lane_num;
>> + unsigned int mipi_speed;
>> + unsigned int fast_open_sensor;
>> + unsigned int self_calibration_mode;
>> +};
>> +
>> +struct fimc_is_sensor_drv_data {
>> + unsigned int sensor_id;
>> + char *sensor_name;
>> + unsigned int pixel_width;
>> + unsigned int pixel_height;
>> + unsigned int active_width;
>> + unsigned int active_height;
>> + unsigned int max_framerate;
>> + struct fimc_is_sensor_ext ext;
>> + char *setfile_name;
>> +};
>> +
>> +enum sensor_clks {
>> + SCLK_BAYER,
>> + SCLK_CAM0,
>> + SCLK_CAM1,
>> + SCLK_MAX_NUM,
>> +};
>> +
>> +struct sensor_pix_format {
>> + enum v4l2_mbus_pixelcode code;
>> +};
>> +
>> +/**
>> + * struct fimc_is_sensor - fimc-is sensor context
>> + * @pad: media pad
>> + * @subdev: sensor subdev
>> + * @clock: sensor clocks array
>> + * @dev: sensor device ptr
>> + * @pipeline: is pipeline context pointer
>> + * @drvdata: sensor specific driver data
>> + * @format: v4l2 mbus format for the subdev
>> + * @gpio_reset: gpio pin to be used for sensor power on/off
>> + * @i2c_ch: sensor's i2c channel number
>> + */
>> +struct fimc_is_sensor {
>> + struct media_pad pad;
>> + struct v4l2_subdev subdev;
>> + struct clk *clock[SCLK_MAX_NUM];
>> + struct device *dev;
>> +
>> + struct fimc_is_pipeline *pipeline;
>> + struct fimc_is_sensor_drv_data *drvdata;
>> + struct v4l2_mbus_framefmt format;
>> + int gpio_reset;
>> + unsigned int i2c_ch;
>> +};
>> +
>> +#endif /* FIMC_IS_SENSOR_H_ */
>
>
> Thanks,
> Sylwester
Thanks and regards
Arun
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
