On Wed 24 July 2013 19:51:03 Sylwester Nawrocki wrote:
> From: Andrzej Hajda <a.ha...@samsung.com>
>
> This patch adds V4L2 subdev driver for Samsung S5K5BAF CMOS
> image sensor with embedded SoC ISP.
>
> The driver exposes two V4L2 subdevices:
> - S5K5BAF-CIS - pure CMOS Image Sensor, fixed 1600x1200 format,
> no controls.
> - S5K5BAF-ISP - Image Signal Processor, formats up to 1600x1200,
> pre/post ISP cropping, downscaling via selection API, controls.
>
> Signed-off-by: Sylwester Nawrocki <s.nawro...@samsung.com>
> Signed-off-by: Andrzej Hajda <a.ha...@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
> ---
> v4:
> - endpoint node presence is now optional,
> - added asynchronous subdev registration support and clock
> handling,
> - GPL changed to GPLv2,
> - bitfields replaced by u8,
> - corrected s_stream flow,
> - gpio pins are no longer exported,
> - added I2C addresses to subdev names,
> - CIS subdev registration postponed after succesfull
> HW initialization,
> - added enums for pads,
> - selections are initialized only during probe,
> - default resolution changed to 1600x1200,
> - state->error pattern removed from few other functions,
> - entity link creation moved to registered callback,
> - some cosmetic changes.
>
> v3:
> - narrowed state->error usage to i2c and power errors,
> - private gain controls replaced by red/blue balance user controls,
> - added checks to devicetree gpio node parsing
>
> v2:
> - lower-cased driver name,
> - removed underscore from regulator names,
> - removed platform data code,
> - v4l controls grouped in anonymous structs,
> - added s5k5baf_clear_error function,
> - private controls definitions moved to uapi header file,
> - added v4l2-controls.h reservation for private controls,
> - corrected subdev registered/unregistered code,
> - .log_status sudbev op set to v4l2 helper,
> - moved entity link creation to probe routines,
> - added cleanup on error to probe function.
> ---
> .../devicetree/bindings/media/samsung-s5k5baf.txt | 58 +
> MAINTAINERS | 7 +
> drivers/media/i2c/Kconfig | 7 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/s5k5baf.c | 2048
> ++++++++++++++++++++
> 5 files changed, 2121 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
> create mode 100644 drivers/media/i2c/s5k5baf.c
>
<snip>
> +
> +enum selection_rect { R_CIS, R_CROP_SINK, R_COMPOSE, R_CROP_SOURCE,
> R_INVALID };
> +
> +static enum selection_rect s5k5baf_get_sel_rect(u32 pad, u32 target)
> +{
> + switch (target) {
> + case V4L2_SEL_TGT_CROP_BOUNDS:
> + return pad ? R_COMPOSE : R_CIS;
> + case V4L2_SEL_TGT_CROP:
> + return pad ? R_CROP_SOURCE : R_CROP_SINK;
> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> + return pad ? R_INVALID : R_CROP_SINK;
> + case V4L2_SEL_TGT_COMPOSE:
> + return pad ? R_INVALID : R_COMPOSE;
> + default:
> + return R_INVALID;
> + }
> +}
> +
> +static int s5k5baf_is_bound_target(u32 target)
> +{
> + return (target == V4L2_SEL_TGT_CROP_BOUNDS ||
> + target == V4L2_SEL_TGT_COMPOSE_BOUNDS);
> +}
> +
> +static int s5k5baf_get_selection(struct v4l2_subdev *sd,
> + struct v4l2_subdev_fh *fh,
> + struct v4l2_subdev_selection *sel)
> +{
> + static enum selection_rect rtype;
> + struct s5k5baf *state = to_s5k5baf(sd);
> +
> + rtype = s5k5baf_get_sel_rect(sel->pad, sel->target);
> +
> + switch (rtype) {
> + case R_INVALID:
> + return -EINVAL;
> + case R_CIS:
> + sel->r = s5k5baf_cis_rect;
> + return 0;
> + default:
> + break;
> + }
> +
> + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
> + if (rtype == R_COMPOSE)
> + sel->r = *v4l2_subdev_get_try_compose(fh, sel->pad);
> + else
> + sel->r = *v4l2_subdev_get_try_crop(fh, sel->pad);
> + return 0;
> + }
> +
> + mutex_lock(&state->lock);
> + switch (rtype) {
> + case R_CROP_SINK:
> + sel->r = state->crop_sink;
> + break;
> + case R_COMPOSE:
> + sel->r = state->compose;
> + break;
> + case R_CROP_SOURCE:
> + sel->r = state->crop_source;
> + break;
> + default:
> + break;
> + }
> + if (s5k5baf_is_bound_target(sel->target)) {
> + sel->r.left = 0;
> + sel->r.top = 0;
> + }
> + mutex_unlock(&state->lock);
> +
> + return 0;
> +}
> +
> +/* bounds range [start, start+len) to [0, max) and aligns to 2 */
> +static void s5k5baf_bound_range(u32 *start, u32 *len, u32 max)
> +{
> + if (*len > max)
> + *len = max;
> + if (*start + *len > max)
> + *start = max - *len;
> + *start &= ~1;
> + *len &= ~1;
> + if (*len < S5K5BAF_WIN_WIDTH_MIN)
> + *len = S5K5BAF_WIN_WIDTH_MIN;
> +}
> +
> +static void s5k5baf_bound_rect(struct v4l2_rect *r, u32 width, u32 height)
> +{
> + s5k5baf_bound_range(&r->left, &r->width, width);
> + s5k5baf_bound_range(&r->top, &r->height, height);
> +}
> +
> +static void s5k5baf_set_rect_and_adjust(struct v4l2_rect **rects,
> + enum selection_rect first,
> + struct v4l2_rect *v)
> +{
> + struct v4l2_rect *r, *br;
> + enum selection_rect i = first;
> +
> + *rects[first] = *v;
> + do {
> + r = rects[i];
> + br = rects[i - 1];
> + s5k5baf_bound_rect(r, br->width, br->height);
> + } while (++i != R_INVALID);
> + *v = *rects[first];
> +}
> +
> +static bool s5k5baf_cmp_rect(const struct v4l2_rect *r1,
> + const struct v4l2_rect *r2)
> +{
> + return !memcmp(r1, r2, sizeof(*r1));
> +}
> +
> +static int s5k5baf_set_selection(struct v4l2_subdev *sd,
> + struct v4l2_subdev_fh *fh,
> + struct v4l2_subdev_selection *sel)
> +{
> + static enum selection_rect rtype;
> + struct s5k5baf *state = to_s5k5baf(sd);
> + struct v4l2_rect **rects;
> + int ret = 0;
> +
> + rtype = s5k5baf_get_sel_rect(sel->pad, sel->target);
> + if (rtype == R_INVALID || s5k5baf_is_bound_target(sel->target))
> + return -EINVAL;
> +
> + /* allow only scaling on compose */
> + if (rtype == R_COMPOSE) {
> + sel->r.left = 0;
> + sel->r.top = 0;
> + }
> +
> + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
> + rects = (struct v4l2_rect * []) {
> + &s5k5baf_cis_rect,
> + v4l2_subdev_get_try_crop(fh, PAD_CIS),
> + v4l2_subdev_get_try_compose(fh, PAD_CIS),
> + v4l2_subdev_get_try_crop(fh, PAD_OUT)
> + };
> + s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
> + return 0;
> + }
> +
> + rects = (struct v4l2_rect * []) {
> + &s5k5baf_cis_rect,
> + &state->crop_sink,
> + &state->compose,
> + &state->crop_source
> + };
> + mutex_lock(&state->lock);
> + if (state->streaming) {
> + /* adjust sel->r to avoid output resolution change */
> + if (rtype < R_CROP_SOURCE) {
> + if (sel->r.width < state->crop_source.width)
> + sel->r.width = state->crop_source.width;
> + if (sel->r.height < state->crop_source.height)
> + sel->r.height = state->crop_source.height;
> + } else {
> + sel->r.width = state->crop_source.width;
> + sel->r.height = state->crop_source.height;
> + }
> + }
> + s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
> + if (!s5k5baf_cmp_rect(&state->crop_sink, &s5k5baf_cis_rect) ||
> + !s5k5baf_cmp_rect(&state->compose, &s5k5baf_cis_rect))
> + state->apply_crop = 1;
> + if (state->streaming)
> + ret = s5k5baf_hw_set_crop_rects(state);
> + mutex_unlock(&state->lock);
> +
> + return ret;
> +}
Would it be an idea to create a library with rectangle manipulation functions?
Looking at this driver and similar ones as well that I had to deal with that
support cropping/scaling/composing I see a lot of rectangle manipulation.
Moving that into a separate source that can be shared should simplify
development.
This is just an idea and it's not blocking for this particular driver.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
