Hi Sylwester, On Wed, Jul 24, 2013 at 12:09 AM, Sylwester Nawrocki <s.nawro...@samsung.com> wrote: > This patch series is a refactoring of the exynos4-is driver to get rid > of the common fimc-is-sensor driver and to adapt it to use "standard" > sensor subdev drivers, one per each image sensor type. > Then a clock provider is added to the exynos4-is driver and the s5k6a3 > subdev is modified to use one of the clocks registered by exynos4-is. > > Arun, I think you could reuse the s5k6a3 sensor for your work on the > Exynos5 FIMC-IS driver. One advantage of separate sensor drivers is > that the power on/off sequences can be written specifically for each > sensor. We are probably going to need such sequences per board in > future. Also having the clock control inside the sensor subdev allows > to better match the hardware power on/off sequence requirements, > however the S5K6A3 sensor can have active clock signal on its clock > input pin even when all its power supplies are turned off. > > I'm posting this series before having a proper implementation for > clk_unregister() in the clock framework, so you are not blocked with > your Exynos5 FIMC-IS works. >
Thank you for the patches. I am modifying exynos5-is based on the same design. Thanks & Regards Arun -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
