This patch adds subdev driver for Samsung S5K4E5 raw image sensor.
Like s5k6a3, it is also another fimc-is firmware controlled
sensor. This minimal sensor driver doesn't do any I2C communications
as its done by ISP firmware. It can be updated if needed to a
regular sensor driver by adding the I2C communication.
Signed-off-by: Arun Kumar K <arun...@samsung.com>
---
.../devicetree/bindings/media/i2c/s5k4e5.txt | 44 +++
drivers/media/i2c/Kconfig | 8 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/s5k4e5.c | 361 ++++++++++++++++++++
4 files changed, 414 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/s5k4e5.txt
create mode 100644 drivers/media/i2c/s5k4e5.c
diff --git a/Documentation/devicetree/bindings/media/i2c/s5k4e5.txt
b/Documentation/devicetree/bindings/media/i2c/s5k4e5.txt
new file mode 100644
index 0000000..88dd726
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/s5k4e5.txt
@@ -0,0 +1,44 @@
+* Samsung S5K4E5 Raw Image Sensor
+
+S5K4E5 is a raw image sensor with maximum resolution of 2560x1920
+pixels. Data transfer is carried out via MIPI-CSI2 port and controls
+via I2C bus.
+
+Required Properties:
+- compatible : must be "samsung,s5k4e5"
+- reg : I2C device address
+- gpios : reset gpio pin
+- clocks : clock specifier for the clock-names property.
+- clock-names : must contain "mclk" entry and matching clock property
+ entry.
+- svdda-supply : core voltage supply
+- svddio-supply : I/O voltage supply
+
+Optional Properties:
+- clock-frequency : operating frequency for the sensor
+ default value will be taken if not provided.
+
+The device node should be added to their control bus controller (e.g.
+I2C0) nodes and linked to the csis port node, using the common video
+interfaces bindings, defined in video-interfaces.txt.
+
+Example:
+
+ i2c-isp@13130000 {
+ s5k4e5@20 {
+ compatible = "samsung,s5k4e5";
+ reg = <0x20>;
+ gpios = <&gpx1 2 1>;
+ clock-frequency = <24000000>;
+ clocks = <&clock 129>;
+ clock-names = "mclk";
+ svdda-supply = <...>;
+ svddio-supply = <...>;
+ port {
+ is_s5k4e5_ep: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csis0_ep>;
+ };
+ };
+ };
+ };
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index f7e9147..271028b 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -572,6 +572,14 @@ config VIDEO_S5K6A3
This is a V4L2 sensor-level driver for Samsung S5K6A3 raw
camera sensor.
+config VIDEO_S5K4E5
+ tristate "Samsung S5K4E5 sensor support"
+ depends on MEDIA_CAMERA_SUPPORT
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF
+ ---help---
+ This is a V4L2 sensor-level driver for Samsung S5K4E5 raw
+ camera sensor.
+
config VIDEO_S5K4ECGX
tristate "Samsung S5K4ECGX sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index cf3cf03..0aeed8e 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o
obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o
obj-$(CONFIG_VIDEO_S5K6A3) += s5k6a3.o
+obj-$(CONFIG_VIDEO_S5K4E5) += s5k4e5.o
obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o
obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/
obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
diff --git a/drivers/media/i2c/s5k4e5.c b/drivers/media/i2c/s5k4e5.c
new file mode 100644
index 0000000..0a6ece6
--- /dev/null
+++ b/drivers/media/i2c/s5k4e5.c
@@ -0,0 +1,361 @@
+/*
+ * Samsung S5K4E5 image sensor driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Arun Kumar K <arun...@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-subdev.h>
+
+#define S5K4E5_SENSOR_MAX_WIDTH 2576
+#define S5K4E5_SENSOR_MAX_HEIGHT 1930
+
+#define S5K4E5_SENSOR_ACTIVE_WIDTH 2560
+#define S5K4E5_SENSOR_ACTIVE_HEIGHT 1920
+
+#define S5K4E5_SENSOR_MIN_WIDTH (32 + 16)
+#define S5K4E5_SENSOR_MIN_HEIGHT (32 + 10)
+
+#define S5K4E5_DEF_WIDTH 1296
+#define S5K4E5_DEF_HEIGHT 732
+
+#define S5K4E5_DRV_NAME "S5K4E5"
+#define S5K4E5_CLK_NAME "mclk"
+
+#define S5K4E5_NUM_SUPPLIES 2
+
+#define S5K4E5_DEF_CLK_FREQ 24000000
+
+/**
+ * struct s5k4e5 - s5k4e5 sensor data structure
+ * @dev: pointer to this I2C client device structure
+ * @subdev: the image sensor's v4l2 subdev
+ * @pad: subdev media source pad
+ * @supplies: image sensor's voltage regulator supplies
+ * @gpio_reset: GPIO connected to the sensor's reset pin
+ * @lock: mutex protecting the structure's members below
+ * @format: media bus format at the sensor's source pad
+ */
+struct s5k4e5 {
+ struct device *dev;
+ struct v4l2_subdev subdev;
+ struct media_pad pad;
+ struct regulator_bulk_data supplies[S5K4E5_NUM_SUPPLIES];
+ int gpio_reset;
+ struct mutex lock;
+ struct v4l2_mbus_framefmt format;
+ struct clk *clock;
+ u32 clock_frequency;
+};
+
+static const char * const s5k4e5_supply_names[] = {
+ "svdda",
+ "svddio"
+};
+
+static inline struct s5k4e5 *sd_to_s5k4e5(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct s5k4e5, subdev);
+}
+
+static const struct v4l2_mbus_framefmt s5k4e5_formats[] = {
+ {
+ .code = V4L2_MBUS_FMT_SGRBG10_1X10,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .field = V4L2_FIELD_NONE,
+ }
+};
+
+static const struct v4l2_mbus_framefmt *find_sensor_format(
+ struct v4l2_mbus_framefmt *mf)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(s5k4e5_formats); i++)
+ if (mf->code == s5k4e5_formats[i].code)
+ return &s5k4e5_formats[i];
+
+ return &s5k4e5_formats[0];
+}
+
+static int s5k4e5_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index >= ARRAY_SIZE(s5k4e5_formats))
+ return -EINVAL;
+
+ code->code = s5k4e5_formats[code->index].code;
+ return 0;
+}
+
+static void s5k4e5_try_format(struct v4l2_mbus_framefmt *mf)
+{
+ const struct v4l2_mbus_framefmt *fmt;
+
+ fmt = find_sensor_format(mf);
+ mf->code = fmt->code;
+ v4l_bound_align_image(&mf->width,
+ S5K4E5_SENSOR_MIN_WIDTH, S5K4E5_SENSOR_MAX_WIDTH, 0,
+ &mf->height,
+ S5K4E5_SENSOR_MIN_HEIGHT, S5K4E5_SENSOR_MAX_HEIGHT, 0,
+ 0);
+}
+
+static struct v4l2_mbus_framefmt *__s5k4e5_get_format(
+ struct s5k4e5 *sensor, struct v4l2_subdev_fh *fh,
+ u32 pad, enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return fh ? v4l2_subdev_get_try_format(fh, pad) : NULL;
+
+ return &sensor->format;
+}
+
+static int s5k4e5_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct s5k4e5 *sensor = sd_to_s5k4e5(sd);
+ struct v4l2_mbus_framefmt *mf;
+
+ s5k4e5_try_format(&fmt->format);
+
+ mf = __s5k4e5_get_format(sensor, fh, fmt->pad, fmt->which);
+ if (mf) {
+ mutex_lock(&sensor->lock);
+ if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ *mf = fmt->format;
+ mutex_unlock(&sensor->lock);
+ }
+ return 0;
+}
+
+static int s5k4e5_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct s5k4e5 *sensor = sd_to_s5k4e5(sd);
+ struct v4l2_mbus_framefmt *mf;
+
+ mf = __s5k4e5_get_format(sensor, fh, fmt->pad, fmt->which);
+
+ mutex_lock(&sensor->lock);
+ fmt->format = *mf;
+ mutex_unlock(&sensor->lock);
+ return 0;
+}
+
+static struct v4l2_subdev_pad_ops s5k4e5_pad_ops = {
+ .enum_mbus_code = s5k4e5_enum_mbus_code,
+ .get_fmt = s5k4e5_get_fmt,
+ .set_fmt = s5k4e5_set_fmt,
+};
+
+static int s5k4e5_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
+
+ *format = s5k4e5_formats[0];
+ format->width = S5K4E5_DEF_WIDTH;
+ format->height = S5K4E5_DEF_HEIGHT;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_internal_ops s5k4e5_sd_internal_ops = {
+ .open = s5k4e5_open,
+};
+
+static int s5k4e5_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct s5k4e5 *sensor = sd_to_s5k4e5(sd);
+ int gpio = sensor->gpio_reset;
+ int ret = 0;
+
+ if (on) {
+ sensor->clock = clk_get(sensor->dev, S5K4E5_CLK_NAME);
+ if (IS_ERR(sensor->clock))
+ return PTR_ERR(sensor->clock);
+
+ ret = clk_set_rate(sensor->clock, sensor->clock_frequency);
+ if (ret < 0)
+ goto clk_put;
+
+ ret = pm_runtime_get(sensor->dev);
+ if (ret < 0)
+ goto clk_put;
+
+ ret = regulator_bulk_enable(S5K4E5_NUM_SUPPLIES,
+ sensor->supplies);
+ if (ret < 0)
+ goto rpm_put;
+
+ ret = clk_prepare_enable(sensor->clock);
+ if (ret < 0)
+ goto reg_dis;
+
+ if (gpio_is_valid(gpio)) {
+ gpio_set_value(gpio, 1);
+ usleep_range(600, 800);
+ gpio_set_value(gpio, 0);
+ usleep_range(10000, 11000);
+ gpio_set_value(gpio, 1);
+ }
+
+ /* Delay needed for the sensor initialization */
+ msleep(20);
+ } else {
+ if (gpio_is_valid(gpio))
+ gpio_set_value(gpio, 0);
+
+ clk_disable_unprepare(sensor->clock);
+reg_dis:
+ regulator_bulk_disable(S5K4E5_NUM_SUPPLIES,
+ sensor->supplies);
+rpm_put:
+ pm_runtime_put(sensor->dev);
+clk_put:
+ clk_put(sensor->clock);
+ }
+ return ret;
+}
+
+static struct v4l2_subdev_core_ops s5k4e5_core_ops = {
+ .s_power = s5k4e5_s_power,
+};
+
+static struct v4l2_subdev_ops s5k4e5_subdev_ops = {
+ .core = &s5k4e5_core_ops,
+ .pad = &s5k4e5_pad_ops,
+};
+
+static int s5k4e5_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct s5k4e5 *sensor;
+ struct v4l2_subdev *sd;
+ int gpio, i, ret;
+
+ sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
+ if (!sensor)
+ return -ENOMEM;
+
+ mutex_init(&sensor->lock);
+ sensor->gpio_reset = -EINVAL;
+ sensor->clock = ERR_PTR(-EINVAL);
+ sensor->dev = dev;
+
+ gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
+ if (gpio_is_valid(gpio)) {
+ ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW,
+ S5K4E5_DRV_NAME);
+ if (ret < 0)
+ return ret;
+ }
+ sensor->gpio_reset = gpio;
+
+ if (of_property_read_u32(dev->of_node, "clock-frequency",
+ &sensor->clock_frequency)) {
+ /* Fallback to default value */
+ sensor->clock_frequency = S5K4E5_DEF_CLK_FREQ;
+ }
+
+ for (i = 0; i < S5K4E5_NUM_SUPPLIES; i++)
+ sensor->supplies[i].supply = s5k4e5_supply_names[i];
+
+ ret = devm_regulator_bulk_get(&client->dev, S5K4E5_NUM_SUPPLIES,
+ sensor->supplies);
+ if (ret < 0)
+ return ret;
+
+ /* Defer probing if the clock is not available yet */
+ sensor->clock = clk_get(dev, S5K4E5_CLK_NAME);
+ if (IS_ERR(sensor->clock))
+ return -EPROBE_DEFER;
+
+ sd = &sensor->subdev;
+ v4l2_i2c_subdev_init(sd, client, &s5k4e5_subdev_ops);
+ sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ sensor->format.code = s5k4e5_formats[0].code;
+ sensor->format.width = S5K4E5_DEF_WIDTH;
+ sensor->format.height = S5K4E5_DEF_HEIGHT;
+
+ sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0);
+ if (ret < 0)
+ return ret;
+
+ pm_runtime_no_callbacks(dev);
+ pm_runtime_enable(dev);
+
+ ret = v4l2_async_register_subdev(sd);
+
+ /*
+ * Don't hold reference to the clock to avoid circular dependency
+ * between the subdev and the host driver, in case the host is
+ * a supplier of the clock.
+ * clk_get()/clk_put() will be called in s_power callback.
+ */
+ clk_put(sensor->clock);
+
+ return ret;
+}
+
+static int s5k4e5_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ v4l2_async_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ return 0;
+}
+
+static const struct i2c_device_id s5k4e5_ids[] = {
+ { }
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id s5k4e5_of_match[] = {
+ { .compatible = "samsung,s5k4e5" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, s5k4e5_of_match);
+#endif
+
+static struct i2c_driver s5k4e5_driver = {
+ .driver = {
+ .of_match_table = of_match_ptr(s5k4e5_of_match),
+ .name = S5K4E5_DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = s5k4e5_probe,
+ .remove = s5k4e5_remove,
+ .id_table = s5k4e5_ids,
+};
+
+module_i2c_driver(s5k4e5_driver);
+
+MODULE_DESCRIPTION("S5K4E5 image sensor subdev driver");
+MODULE_AUTHOR("Arun Kumar K <arun...@samsung.com>");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
