Hi Arun, My apologies for the delay.
On 27/09/13 12:59, Arun Kumar K wrote: > s5k6a3 sensor has actual pixel resolution of 1408x1402 against > the active resolution 1392x1392. The real resolution is needed > when raw sensor SRGB data is dumped to memory by fimc-lite. > > Signed-off-by: Arun Kumar K <arun...@samsung.com> > Reviewed-by: Sylwester Nawrocki <s.nawro...@samsung.com> > --- > drivers/media/i2c/s5k6a3.c | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c > index ccbb4fc..e70e217 100644 > --- a/drivers/media/i2c/s5k6a3.c > +++ b/drivers/media/i2c/s5k6a3.c > @@ -25,10 +25,12 @@ > #include <media/v4l2-async.h> > #include <media/v4l2-subdev.h> > > -#define S5K6A3_SENSOR_MAX_WIDTH 1392 > -#define S5K6A3_SENSOR_MAX_HEIGHT 1392 > -#define S5K6A3_SENSOR_MIN_WIDTH 32 > -#define S5K6A3_SENSOR_MIN_HEIGHT 32 > +#define S5K6A3_SENSOR_MAX_WIDTH 1408 > +#define S5K6A3_SENSOR_MAX_HEIGHT 1402 Where these numbers come from ? I digged in the datasheet and the pixel array size for S5K6A3YX is 1412 x 1412 pixels. I will use this value in my updated s5k6a3 driver patch I'm going to post today. And I will drop this patch from this series. > +#define S5K6A3_SENSOR_ACTIVE_WIDTH 1392 > +#define S5K6A3_SENSOR_ACTIVE_HEIGHT 1392 S5K6A3_SENSOR_ACTIVE_* macros are not used anywhere ? Can they be dropped ? Same applies to your S5K4E5 driver patch. > +#define S5K6A3_SENSOR_MIN_WIDTH (32 + 16) > +#define S5K6A3_SENSOR_MIN_HEIGHT (32 + 10) > > #define S5K6A3_DEF_PIX_WIDTH 1296 > #define S5K6A3_DEF_PIX_HEIGHT 732 > Thanks, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
