Hi Sylwester,
Thank you for the patch.
On Tuesday 11 March 2014 17:00:35 Sylwester Nawrocki wrote:
> This patch documents following updates of the Exynos4 SoC camera subsystem
> devicetree binding:
>
> - addition of #clock-cells and clock-output-names properties to 'camera'
> node - these are now needed so the image sensor sub-devices can reference
> clocks provided by the camera host interface,
> - dropped a note about required clock-frequency properties at the
> image sensor nodes; the sensor devices can now control their clock
> explicitly through the clk API and there is no need to require this
> property in the camera host interface binding.
>
> Signed-off-by: Sylwester Nawrocki <s.nawro...@samsung.com>
> ---
> Resending only single patch which changed.
>
> Changes since v6:
> - #clock-cells, clock-output-names documented as mandatory properties;
> - renamed "cam_mclk_{a,b}" to "cam_{a,b}_clkout in the example dts,
> this now matches changes in exynos4.dtsi further in the patch series;
> - marked "samsung,camclk-out" property as deprecated.
>
> Changes since v5:
> - none.
>
> Changes since v4:
> - dropped a requirement of specific order of values in clocks/
> clock-names properties (Mark) and reference to clock-names in
> clock-output-names property description (Mark).
> ---
> .../devicetree/bindings/media/samsung-fimc.txt | 46
> +++++++++++++------- 1 file changed, 31 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt
> b/Documentation/devicetree/bindings/media/samsung-fimc.txt index
> 96312f6..1908a5f 100644
> --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
> +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
[snip]
> Image sensor nodes
> ------------------
> @@ -97,8 +108,8 @@ Image sensor nodes
> The sensor device nodes should be added to their control bus controller
> (e.g. I2C0) nodes and linked to a port node in the csis or the
> parallel-ports node, using the common video interfaces bindings, defined in
> video-interfaces.txt.
> -The implementation of this bindings requires clock-frequency property to be
> -present in the sensor device nodes.
> +An optional clock-frequency property needs to be present in the sensor
> device
> +nodes. Default value when this property is not present is 24 MHz.
I think you forgot to drop that sentence.
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
