On Sun, 15 Jun 2014, Robert Jarzmik wrote:
> Add device-tree support to pxa_camera host driver.
>
> Signed-off-by: Robert Jarzmik <robert.jarz...@free.fr>
> ---
> drivers/media/platform/soc_camera/pxa_camera.c | 80
> ++++++++++++++++++++++++++
> 1 file changed, 80 insertions(+)
>
> diff --git a/drivers/media/platform/soc_camera/pxa_camera.c
> b/drivers/media/platform/soc_camera/pxa_camera.c
> index d4df305..e48d821 100644
> --- a/drivers/media/platform/soc_camera/pxa_camera.c
> +++ b/drivers/media/platform/soc_camera/pxa_camera.c
> @@ -34,6 +34,7 @@
> #include <media/videobuf-dma-sg.h>
> #include <media/soc_camera.h>
> #include <media/soc_mediabus.h>
> +#include <media/v4l2-of.h>
>
> #include <linux/videodev2.h>
>
> @@ -1650,9 +1651,74 @@ static struct soc_camera_host_ops
> pxa_soc_camera_host_ops = {
> .set_bus_param = pxa_camera_set_bus_param,
> };
>
> +static const struct of_device_id pxacamera_dt_ids[] = {
> + { .compatible = "mrvl,pxa_camera", },
as Documentation/devicetree/bindings/vendor-prefixes.txt defines, it
should be "marvell."
> + { }
> +};
> +
> +static int pxa_camera_pdata_from_dt(struct device *dev,
> + struct pxacamera_platform_data *pdata)
> +{
> + int err = 0;
> + struct device_node *np = dev->of_node;
> + struct v4l2_of_endpoint ep;
> +
> + dev_info(dev, "RJK: %s()\n", __func__);
I have nothing against attributing work to respective authors, but I don't
think this makes a lot of sense in the long run in the above form :) Once
you've verified that your binding is working and this function is working,
either remove this or make it more informative - maybe at the end of this
function, also listing a couple of important parameters, that you obtained
from DT.
> + err = of_property_read_u32(np, "mclk_10khz",
> + (u32 *)&pdata->mclk_10khz);
I think we'll be frowned upon for this :) PXA270 doesn't support CCF, does
it? Even if it doesn't we probably should use the standard
"clock-frequency" property in any case. Actually, I missed to mention on
this in my comments to your bindings documentation.
> + if (!err)
> + pdata->flags |= PXA_CAMERA_MCLK_EN;
> +
> + np = of_graph_get_next_endpoint(np, NULL);
> + if (!np) {
> + dev_err(dev, "could not find endpoint\n");
> + return -EINVAL;
> + }
> +
> + err = v4l2_of_parse_endpoint(np, &ep);
> + if (err) {
> + dev_err(dev, "could not parse endpoint\n");
> + return err;
> + }
> +
> + switch (ep.bus.parallel.bus_width) {
> + case 4:
> + pdata->flags |= PXA_CAMERA_DATAWIDTH_4;
> + break;
> + case 5:
> + pdata->flags |= PXA_CAMERA_DATAWIDTH_5;
> + break;
> + case 8:
> + pdata->flags |= PXA_CAMERA_DATAWIDTH_8;
> + break;
> + case 9:
> + pdata->flags |= PXA_CAMERA_DATAWIDTH_9;
> + break;
> + case 10:
> + pdata->flags |= PXA_CAMERA_DATAWIDTH_10;
> + break;
> + default:
> + break;
> + };
> +
> + if (ep.bus.parallel.flags & V4L2_MBUS_MASTER)
> + pdata->flags |= PXA_CAMERA_MASTER;
> + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> + pdata->flags |= PXA_CAMERA_HSP;
> + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> + pdata->flags |= PXA_CAMERA_VSP;
> + if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
> + pdata->flags |= PXA_CAMERA_PCLK_EN | PXA_CAMERA_PCP;
> + if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
> + pdata->flags |= PXA_CAMERA_PCLK_EN;
> +
> + return 0;
> +}
> +
> static int pxa_camera_probe(struct platform_device *pdev)
> {
> struct pxa_camera_dev *pcdev;
> + struct pxacamera_platform_data pdata_dt;
> struct resource *res;
> void __iomem *base;
> int irq;
> @@ -1676,6 +1742,13 @@ static int pxa_camera_probe(struct platform_device
> *pdev)
> pcdev->res = res;
>
> pcdev->pdata = pdev->dev.platform_data;
> + if (&pdev->dev.of_node && !pcdev->pdata)
> + err = pxa_camera_pdata_from_dt(&pdev->dev, &pdata_dt);
> + if (err < 0)
> + return err;
> + else
> + pcdev->pdata = &pdata_dt;
This will Oops, if someone decides to dereference pcdev->pdata outside of
this function. pdata_dt is on stack and you store a pointer to it in your
device data... But since ->pdata doesn't seem to be used anywhere else in
this driver, maybe remove that struct member completely?
> +
> pcdev->platform_flags = pcdev->pdata->flags;
> if (!(pcdev->platform_flags & (PXA_CAMERA_DATAWIDTH_8 |
> PXA_CAMERA_DATAWIDTH_9 | PXA_CAMERA_DATAWIDTH_10))) {
> @@ -1799,10 +1872,17 @@ static const struct dev_pm_ops pxa_camera_pm = {
> .resume = pxa_camera_resume,
> };
>
> +static const struct of_device_id pxa_camera_of_match[] = {
> + { .compatible = "mrvl,pxa_camera", },
Another thing I failed to comment upon: I think DT should contain only
hardware descriptions, nothing driver specific, and "pxa_camera" is more a
name of the driver, than the hardware? Maybe something like
"marvell,pxa27x-cif" would be suitable?
Thanks
Guennadi
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, pxa_camera_of_match);
> +
> static struct platform_driver pxa_camera_driver = {
> .driver = {
> .name = PXA_CAM_DRV_NAME,
> .pm = &pxa_camera_pm,
> + .of_match_table = of_match_ptr(pxa_camera_of_match),
> },
> .probe = pxa_camera_probe,
> .remove = pxa_camera_remove,
> --
> 2.0.0.rc2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
