Hi all, I am running a Terratec DVB Cinergy T stick MKII under openSUSE and cannot find all the channels available in my region (Brussels). I have all the channels from on 482Mhz but none on 754mh, whereas on Windows I receive both.
How can it be that it does not fully work under linux? Is there an issue with the driver? Neither kaffeine nor 'scan' will find it. The latter outputs a tuning failure: quentin@linux-v3k0:~> scan be-All.txt > channels.conf scanning be-All.txt using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 754000000 0 3 9 1 1 3 0 initial transponder 482000000 0 1 9 3 1 3 0 initial transponder 506000000 0 1 9 3 1 3 0 initial transponder 666000000 0 3 9 1 1 3 0 initial transponder 834000000 0 3 9 1 1 3 0 >>> tune to: 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 754000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE Network Name 'VRTmux1' 0x0001 0x1010: pmt_pid 0x1010 VRT -- EEN (running) 0x0001 0x1020: pmt_pid 0x1020 VRT -- Canvas (running) 0x0001 0x1030: pmt_pid 0x1030 VRT -- Ketnet op 12 (running) 0x0001 0x1040: pmt_pid 0x1040 VRT -- Radio 1 (running) 0x0001 0x1050: pmt_pid 0x1050 VRT -- Radio 2 (running) 0x0001 0x1060: pmt_pid 0x1060 VRT -- Klara (running) 0x0001 0x1070: pmt_pid 0x1070 VRT -- Studio Brussel (running) 0x0001 0x1080: pmt_pid 0x1080 VRT -- MNM (running) 0x0001 0x1090: pmt_pid 0x1090 VRT -- Klara Continuo (running) 0x0001 0x10a0: pmt_pid 0x10a0 VRT -- Sporza (running) 0x0001 0x10c0: pmt_pid 0x10c0 VRT -- Nieuws+ (running) 0x0001 0x10d0: pmt_pid 0x10d0 VRT -- MNM Hits (running) >>> tune to: 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 666000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! dumping lists (12 services) Done. Best regards, Quentin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
