On Wed, Jul 16, 2014 at 10:19 AM, Bryan Wu <coolo...@gmail.com> wrote:
> On Fri, Jul 11, 2014 at 7:04 AM, Jacek Anaszewski
> <j.anaszew...@samsung.com> wrote:
>> This is is the fourth version of the patch series being a follow up
>> of the discussion on Media summit 2013-10-23, related to the
>> LED / flash API integration (the notes from the discussion were
>> enclosed in the message [1], paragraph 5).
>> The series is based on linux-next-20140707
>>
>
> I really apologize that I missed your discussion email in my Gmail
> inbox, it was archived some where. Even in this series some of these
> patches are archived in different tab.
>
> I will start to review and help to push this.
>

In the mean time, could you please provide an git tree for me to pull?
It's much easier for me to review in my git.

-Bryan

>
>
>> Description of the proposed modifications according to
>> the kernel components they are relevant to:
>>     - LED subsystem modifications
>>         * added led_flash module which, when enabled in the config,
>>           registers flash specific sysfs attributes, if the driver
>>           declares related features:
>>             - flash_brightness
>>             - max_flash_brightness
>>             - indicator_brightness
>>             - max_indicator_brightness
>>             - flash_timeout
>>             - max_flash_timeout
>>             - flash_strobe
>>             - external_strobe
>>             - flash_fault
>>           and exposes kernel internal API:
>>             - led_classdev_flash_register
>>             - led_classdev_flash_unregister
>>             - led_set_flash_strobe
>>             - led_get_flash_strobe
>>             - led_set_flash_brightness
>>             - led_update_flash_brightness
>>             - led_set_indicator_brightness
>>             - led_update_indicator_brightness
>>             - led_set_flash_timeout
>>             - led_get_flash_fault
>>             - led_set_external_strobe
>>             - led_sysfs_lock
>>             - led_sysfs_unlock
>>         * added Flash Manager functionality, available when
>>           led_flash module is enable in the config;
>>           if the device tree node of a flash led device contains
>>           relevant subnodes, it registers following sysfs attributes:
>>             - strobe_provider
>>             - strobe_providerN
>>             - blocking_strobe
>>           following kernel internal API is exposed by the flash manager:
>>             - led_flash_manager_register_flash
>>             - led_flash_manager_unregister_flash
>>             - led_flash_manager_setup_strobe
>>             - led_flash_manager_bind_async_mux
>>             - led_flash_manager_unbind_async_mux
>>     - Addition of a V4L2 Flash sub-device registration helpers
>>         * added v4l2-flash.c and v4l2-flash.h files with helper
>>           functions that facilitate registration/unregistration
>>           of a subdevice, which wrapps a LED subsystem device and
>>           exposes V4L2 Flash control interface
>>     - Addition of a LED Flash Class driver for the flash cell of
>>       the MAX77693 mfd
>>     - Addition of a LED Flash Class driver for the AAT1290 current
>>       regulator for flash leds along with its DT binding for the
>>       exynos4412-trats2 board, where standalone multiplexer is
>>       used for modifying strobe signal routing - either from the SoC
>>       GPIO or from a camera sensor. This arrangment is handled
>>       by the newly introduced Flash Manager functionality.
>>     - Update of the max77693.txt DT bindings documentation
>>     - Update of the common leds DT bindings documentation
>>
>> ================
>> Changes since v2
>> ================
>>
>>     - refactored the code so that it is possible to build
>>       led-core without led-flash module
>>     - added v4l2-flash ops which slackens dependency from
>>       the led-flash module
>>     - implemented led_clamp_align_val function and led_ctrl
>>       structure which allows to align led control values
>>       in the manner compatible with V4L2 Flash controls;
>>       the flash brightness and timeout units have been defined
>>       as microamperes and microseconds respectively to properly
>>       support devices which define current and time levels
>>       as fractions of 1/1000.
>>     - added support for the flash privacy leds
>>     - modified LED sysfs locking mechanism - now it locks/unlocks
>>       the interface on V4L2 Flash sub-device file open/close
>>     - changed hw_triggered attribute name to external_strobe,
>>       which maps on the V4L2_FLASH_STROBE_SOURCE_EXTERNAL name
>>       more intuitively
>>     - made external_strobe and indicator related sysfs attributes
>>       created optionally only if related features are declared
>>       by the led device driver
>>     - removed from the series patches modifying exynos4-is media
>>       controller - a proposal for "flash manager" which will take
>>       care of flash devices registration is due to be submitted
>>     - removed modifications to the LED class devices documentation,
>>       it will be covered after the whole functionality is accepted
>>
>> ================
>> Changes since v3
>> ================
>>
>>     - added Flash Manager feature
>>       - added generic LED Flash Class gpio mux driver
>>       - added sample async mux driver
>>       - added of helpers for parsing Flash Manager related
>>         device tree data
>>     - added V4L2_CID_FLASH_STROBE_PROVIDER control
>>     - introduced struct led_classdev_flash, which wrapps
>>       struct led_classdev
>>     - made all flash ops, except strobe_set, optional; if an op
>>       is absent the related sysfs attribute isn't created
>>     - added LED_DEV_CAP* flags
>>     - modified v4l2-flash helpers to create v4l2_device
>>       for v4l2_flash subdevices to register in it
>>     - modified max77693-flash driver and its DT bindings
>>       to allow for registering either one or two LED Flash
>>       Class devices, depending on the device tree settings.
>>     - added new API for setting torch_brightness
>>     - extended leds common DT binding documentation
>>
>> Issues:
>>
>> 1) Who should register V4L2 Flash sub-device?
>>
>> LED Flash Class devices, after introduction of the Flash Manager,
>> are not tightly coupled with any media controller. They are maintained
>> by the Flash Manager and made available for dynamic assignment to
>> any media system they are connected to through multiplexing devices.
>>
>> In the proposed rough solution, when support for V4L2 Flash sub-devices
>> is enabled, there is a v4l2_device created for them to register in.
>> This however implies that V4L2 Flash device will not be available
>> in any media controller, which calls its existence into question.
>>
>> Therefore I'd like to consult possible ways of solving this issue.
>> The option I see is implementing a mechanism for moving V4L2 Flash
>> sub-devices between media controllers. A V4L2 Flash sub-device
>> would initially be assigned to one media system in the relevant
>> device tree binding, but it could be dynamically reassigned to
>> the other one. However I'm not sure if media controller design
>> is prepared for dynamic modifications of its graph and how many
>> modifications in the existing drivers this solution would require.
>>
>> 2) Consequences of locking the Flash Manager during flash strobe
>>
>> In case a LED Flash Class device depends on muxes involved in
>> routing the other LED Flash Class device's strobe signals,
>> the Flash Manager must be locked for the time of strobing
>> to prevent reconfiguration of the strobe signal routing
>> by the other device.
>>
>> A blocking_strobe sysfs attribute was added to indicate whether
>> this is the case for the device.
>>
>> Nonetheless, this modifies behaviour of led_set_external_strobe
>> API, which also must block the caller for the time of strobing
>> to protect the strobe signal routing while the external strobe
>> signal provider asserts the flash_en pin.
>>
>> Use case for user space application would be following in this case:
>>   - spawn a new thread in which external strobe is activated
>>   - in the parent thread instruct the external strobe provider
>>     to strobe the flash
>>
>> As an improvement there could be an op added for notifying
>> the application that the strobe signal routing has been
>> set up. It would have to be called from the function
>> led_flash_manager_setup_strobe after led_flash_manager_set_external_strobe
>> returns.
>>
>> The blocking_strobe attribute would have to be also
>> mapped to a new V4L2 Flash control. Unfortunately it poses
>> a problem for the existing users of the V4L2 Flash API
>> which are not aware that setting V4L2_CID_FLASH_STROBE_SOURCE
>> may be blocking.
>>
>> As a solution led_set_external_strobe API could be extended
>> by a parameter telling whether the caller is prepared for
>> the blocking call. led_flash_manager_setup_strobe should
>> be extended accordingly then.
>> In V4L2 "V4L2_FLASH_STROBE_SOURCE_EXTERNAL_BLOCKING" menu item
>> could be added to handle this.
>> With existing V4L2_FLASH_STROBE_SOURCE_EXTERNAL the flash manager
>> wouldn't protect muxes against reconfiguration.
>>
>> TODO:
>>   - switch to using V4L2 array controls
>>   - add s_power op to the LED Flash Class
>>
>>
>> I will be off-line for three weeks from now on and will respond
>> to any questions after getting back.
>>
>>
>> Thanks,
>> Jacek Anaszewski
>>
>> Jacek Anaszewski (21):
>>   leds: make brightness type consistent across whole subsystem
>>   leds: implement sysfs interface locking mechanism
>>   leds: Improve and export led_update_brightness
>>   leds: Reorder include directives
>>   leds: avoid using deprecated DEVICE_ATTR macro
>>   leds: add API for setting torch brightness
>>   of: add of_node_ncmp wrapper
>>   leds: Add sysfs and kernel internal API for flash LEDs
>>   Documentation: leds: Add description of LED Flash Class extension
>>   Documentation: leds: add exemplary asynchronous mux driver
>>   DT: leds: Add flash led devices related properties
>>   DT: Add documentation for LED Class Flash Manger
>>   v4l2-device: add v4l2_device_register_subdev_node API
>>   v4l2-ctrls: add control for flash strobe signal providers
>>   media: Add registration helpers for V4L2 flash
>>   leds: Add support for max77693 mfd flash cell
>>   DT: Add documentation for the mfd Maxim max77693
>>   leds: Add driver for AAT1290 current regulator
>>   of: Add Skyworks Solutions, Inc. vendor prefix
>>   DT: Add documentation for the Skyworks AAT1290
>>   ARM: dts: add aat1290 current regulator device node
>>
>>  Documentation/DocBook/media/v4l/controls.xml       |   11 +
>>  Documentation/devicetree/bindings/leds/common.txt  |   16 +
>>  .../devicetree/bindings/leds/leds-aat1290.txt      |   17 +
>>  .../bindings/leds/leds-flash-manager.txt           |  165 +++
>>  Documentation/devicetree/bindings/mfd/max77693.txt |   62 ++
>>  .../devicetree/bindings/vendor-prefixes.txt        |    1 +
>>  Documentation/leds/leds-async-mux.c                |   65 ++
>>  Documentation/leds/leds-class-flash.txt            |  126 +++
>>  arch/arm/boot/dts/exynos4412-trats2.dts            |   24 +
>>  drivers/leds/Kconfig                               |   28 +
>>  drivers/leds/Makefile                              |    7 +
>>  drivers/leds/led-class-flash.c                     |  715 +++++++++++++
>>  drivers/leds/led-class.c                           |   58 +-
>>  drivers/leds/led-core.c                            |   51 +-
>>  drivers/leds/led-flash-gpio-mux.c                  |  102 ++
>>  drivers/leds/led-flash-manager.c                   |  698 +++++++++++++
>>  drivers/leds/led-triggers.c                        |   16 +-
>>  drivers/leds/leds-aat1290.c                        |  455 +++++++++
>>  drivers/leds/leds-max77693.c                       | 1070 
>> ++++++++++++++++++++
>>  drivers/leds/of_led_flash_manager.c                |  155 +++
>>  drivers/media/v4l2-core/Kconfig                    |   11 +
>>  drivers/media/v4l2-core/Makefile                   |    2 +
>>  drivers/media/v4l2-core/v4l2-ctrls.c               |    2 +
>>  drivers/media/v4l2-core/v4l2-device.c              |   63 +-
>>  drivers/media/v4l2-core/v4l2-flash.c               |  580 +++++++++++
>>  drivers/mfd/max77693.c                             |    5 +-
>>  include/linux/led-class-flash.h                    |  290 ++++++
>>  include/linux/led-flash-gpio-mux.h                 |   68 ++
>>  include/linux/led-flash-manager.h                  |  121 +++
>>  include/linux/leds.h                               |   73 +-
>>  include/linux/mfd/max77693.h                       |   40 +
>>  include/linux/of.h                                 |    1 +
>>  include/linux/of_led_flash_manager.h               |   80 ++
>>  include/media/v4l2-device.h                        |    7 +
>>  include/media/v4l2-flash.h                         |  137 +++
>>  include/uapi/linux/v4l2-controls.h                 |    2 +
>>  36 files changed, 5272 insertions(+), 52 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/leds/leds-aat1290.txt
>>  create mode 100644 
>> Documentation/devicetree/bindings/leds/leds-flash-manager.txt
>>  create mode 100644 Documentation/leds/leds-async-mux.c
>>  create mode 100644 Documentation/leds/leds-class-flash.txt
>>  create mode 100644 drivers/leds/led-class-flash.c
>>  create mode 100644 drivers/leds/led-flash-gpio-mux.c
>>  create mode 100644 drivers/leds/led-flash-manager.c
>>  create mode 100644 drivers/leds/leds-aat1290.c
>>  create mode 100644 drivers/leds/leds-max77693.c
>>  create mode 100644 drivers/leds/of_led_flash_manager.c
>>  create mode 100644 drivers/media/v4l2-core/v4l2-flash.c
>>  create mode 100644 include/linux/led-class-flash.h
>>  create mode 100644 include/linux/led-flash-gpio-mux.h
>>  create mode 100644 include/linux/led-flash-manager.h
>>  create mode 100644 include/linux/of_led_flash_manager.h
>>  create mode 100644 include/media/v4l2-flash.h
>>
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-media" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to