Hi,
With the kernel 3.16.2-1-ARCH i am unable to watch DVB using my TeVii
DVB-S2 S650 and VDR. After reboot it works for like a 5 minutes and
then i get this Call Trace. I tried to get most information and also
did tested with adding the irqpool to kernel boot option (second Call
Trace) but it did not help that much.
without irqpool:
[ 1974.492218] irq 23: nobody cared (try booting with the "irqpoll" option)
[ 1974.492234] CPU: 0 PID: 465 Comm: kdvb-ad-0-fe-0 Tainted: P
O 3.16.2-1-ARCH #1
[ 1974.492239] Hardware name: Point of View ION-MB330-1/ION-MB330-1,
BIOS 080015 07/29/2009
[ 1974.492244] 0000000000000000 0000000017e85ee0 ffff88005fc03d28
ffffffff8152afec
[ 1974.492253] ffff88005ca49600 ffff88005fc03d50 ffffffff810d0292
ffff88005ca49600
[ 1974.492260] 0000000000000000 0000000000000017 ffff88005fc03d88
ffffffff810d0647
[ 1974.492268] Call Trace:
[ 1974.492273] <IRQ> [<ffffffff8152afec>] dump_stack+0x4d/0x6f
[ 1974.492296] [<ffffffff810d0292>] __report_bad_irq+0x32/0xd0
[ 1974.492304] [<ffffffff810d0647>] note_interrupt+0x257/0x2a0
[ 1974.492313] [<ffffffff810cdb9e>] handle_irq_event_percpu+0xae/0x1f0
[ 1974.492320] [<ffffffff810cdd1d>] handle_irq_event+0x3d/0x60
[ 1974.492328] [<ffffffff810d1271>] handle_fasteoi_irq+0x81/0x170
[ 1974.492338] [<ffffffff8101717e>] handle_irq+0x1e/0x40
[ 1974.492345] [<ffffffff8153382d>] do_IRQ+0x4d/0xe0
[ 1974.492354] [<ffffffff815317ed>] common_interrupt+0x6d/0x6d
[ 1974.492592] [<ffffffffa089bf40>] ? _nv013453rm+0x30/0x30 [nvidia]
[ 1974.492604] [<ffffffff8107365b>] ? __do_softirq+0x8b/0x2e0
[ 1974.492612] [<ffffffff81073a06>] irq_exit+0x86/0xb0
[ 1974.492619] [<ffffffff81533836>] do_IRQ+0x56/0xe0
[ 1974.492627] [<ffffffff815317ed>] common_interrupt+0x6d/0x6d
[ 1974.492630] <EOI> [<ffffffffa0355495>] ? dw210x_op_rw+0x115/0x170
[dvb_usb_dw2102]
[ 1974.492649] [<ffffffff8101e296>] ? native_read_tsc+0x6/0x20
[ 1974.492658] [<ffffffff812ad703>] delay_tsc+0x43/0xc0
[ 1974.492665] [<ffffffff812ad5ff>] __delay+0xf/0x20
[ 1974.492672] [<ffffffff812ad63e>] __const_udelay+0x2e/0x30
[ 1974.492680] [<ffffffffa03570da>] dw2104_i2c_transfer+0x25a/0x408
[dvb_usb_dw2102]
[ 1974.492688] [<ffffffff8101e8d5>] ? native_sched_clock+0x35/0xb0
[ 1974.492697] [<ffffffff810ae74d>] ? enqueue_task_fair+0x10d/0x5b0
[ 1974.492705] [<ffffffff810a6234>] ? sched_clock_cpu+0x54/0xe0
[ 1974.492728] [<ffffffffa0161c7d>] __i2c_transfer+0x6d/0x270 [i2c_core]
[ 1974.492740] [<ffffffffa0162836>] i2c_transfer+0x56/0xc0 [i2c_core]
[ 1974.492749] [<ffffffffa03850df>] cx24116_readreg+0x8f/0x100 [cx24116]
[ 1974.492757] [<ffffffffa0385280>] cx24116_read_status+0x20/0x80 [cx24116]
[ 1974.492765] [<ffffffffa0387058>] cx24116_tune+0x38/0xfe0 [cx24116]
[ 1974.492777] [<ffffffffa02f98bf>] dvb_frontend_thread+0x4cf/0x750 [dvb_core]
[ 1974.492785] [<ffffffff810b6b30>] ? __wake_up_sync+0x20/0x20
[ 1974.492796] [<ffffffffa02f93f0>] ?
dvb_frontend_should_wakeup.isra.2+0x80/0x80 [dvb_core]
[ 1974.492804] [<ffffffff81091cea>] kthread+0xea/0x100
[ 1974.492813] [<ffffffff811c0000>] ? vfs_truncate+0x130/0x1a0
[ 1974.492821] [<ffffffff81091c00>] ? kthread_create_on_node+0x1b0/0x1b0
[ 1974.492829] [<ffffffff81530cbc>] ret_from_fork+0x7c/0xb0
[ 1974.492836] [<ffffffff81091c00>] ? kthread_create_on_node+0x1b0/0x1b0
[ 1974.492842] handlers:
[ 1974.492867] [<ffffffffa002db60>] usb_hcd_irq [usbcore]
[ 1974.492872] Disabling IRQ #23
with irqpool in kernel boot option:
[ 553.046862] irq 23: nobody cared (try booting with the "irqpoll" option)
[ 553.046881] CPU: 0 PID: 547 Comm: receiver on dev Tainted: P
O 3.16.2-1-ARCH #1
[ 553.046887] Hardware name: Point of View ION-MB330-1/ION-MB330-1,
BIOS 080015 07/29/2009
[ 553.046893] 0000000000000000 000000001aab2dd1 ffff88005fc03e60
ffffffff8152afec
[ 553.046902] ffff88005ca49600 ffff88005fc03e88 ffffffff810d0292
ffff88005ca49600
[ 553.046909] 0000000000000000 0000000000000017 ffff88005fc03ec0
ffffffff810d0647
[ 553.046917] Call Trace:
[ 553.046923] <IRQ> [<ffffffff8152afec>] dump_stack+0x4d/0x6f
[ 553.046951] [<ffffffff810d0292>] __report_bad_irq+0x32/0xd0
[ 553.046960] [<ffffffff810d0647>] note_interrupt+0x257/0x2a0
[ 553.046968] [<ffffffff810cdb9e>] handle_irq_event_percpu+0xae/0x1f0
[ 553.046976] [<ffffffff810cdd1d>] handle_irq_event+0x3d/0x60
[ 553.046984] [<ffffffff810d1271>] handle_fasteoi_irq+0x81/0x170
[ 553.046996] [<ffffffff8101717e>] handle_irq+0x1e/0x40
[ 553.047004] [<ffffffff8153382d>] do_IRQ+0x4d/0xe0
[ 553.047013] [<ffffffff815317ed>] common_interrupt+0x6d/0x6d
[ 553.047016] <EOI> [<ffffffff81530d69>] ? system_call_fastpath+0x16/0x1b
[ 553.047026] handlers:
[ 553.047080] [<ffffffffa002db60>] usb_hcd_irq [usbcore]
[ 553.047085] Disabling IRQ #23
$ sudo lspci -v | grep IRQ
Flags: 66MHz, fast devsel, IRQ 10
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 40
Flags: bus master, fast devsel, latency 0, IRQ 42
Flags: bus master, fast devsel, latency 0, IRQ 41
$
00:04.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1
Controller (rev b1) (prog-if 10 [OHCI])
Subsystem: NVIDIA Corporation Apple iMac 9,1
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fae7f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
$ lspci|grep USB
00:04.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1
Controller (rev b1)
00:04.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0
Controller (rev b1)
00:06.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1
Controller (rev b1)
00:06.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0
Controller (rev b1)
$
00:04.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1
Controller (rev b1) (prog-if 10 [OHCI])
Subsystem: NVIDIA Corporation Apple iMac 9,1
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fae7f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
[ 6.080219] dvb-usb: will pass the complete MPEG2 transport stream
to the software demuxer.
[ 6.080504] DVB: registering new adapter (TeVii S650 USB2.0)
[ 6.273309] dvb-usb: MAC address: 00:18:bd:5b:ab:4d
[ 6.308060] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 6.308093] snd_hda_intel 0000:00:08.0: Disabling MSI
[ 6.390816] dw2102: Attached cx24116!
[ 6.390838] usb 2-3: DVB: registering adapter 0 frontend 0
(Conexant CX24116/CX24118)...
[ 6.670291] Registered IR keymap rc-tevii-nec
[ 6.670780] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:06.1/usb2/2-3/rc/rc1/input9
[ 6.671942] rc1: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:06.1/usb2/2-3/rc/rc1
[ 6.671958] dvb-usb: schedule remote query interval to 150 msecs.
[ 6.671975] dvb-usb: TeVii S650 USB2.0 successfully initialized and
connected.
[ 6.672138] usbcore: registered new interface driver dw2102
[ 7.410907] nvidia: module license 'NVIDIA' taints kernel.
[ 7.410926] Disabling lock debugging due to kernel taint
[ 7.475519] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20
[ 7.476205] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
lsusb:
Bus 002 Device 003: ID 9022:d650 TeVii Technology Ltd. DVB-S2 S65
Bus 002 Device 003: ID 9022:d650 TeVii Technology Ltd. DVB-S2 S650
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x9022 TeVii Technology Ltd.
idProduct 0xd650 DVB-S2 S650
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 0
$ uname -a
Linux vdrvdpau 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST
2014 x86_64 GNU/Linux
$ cat /proc/interrupts |more
CPU0 CPU1 CPU2 CPU3
0: 56 0 0 0 IO-APIC-edge timer
1: 3 0 0 0 IO-APIC-edge i8042
7: 1 0 0 0 IO-APIC-edge
8: 1 0 0 0 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
12: 4 0 0 0 IO-APIC-edge i8042
20: 464238 0 0 0 IO-APIC-fasteoi
ehci_hcd:usb2
21: 456 0 0 0 IO-APIC-fasteoi
ohci_hcd:usb4, snd_hda_intel
22: 2 0 0 0 IO-APIC-fasteoi
ehci_hcd:usb1
23: 15703 0 0 0 IO-APIC-fasteoi
ohci_hcd:usb3
40: 8049 0 0 0 PCI-MSI-edge ahci
41: 395 0 0 0 PCI-MSI-edge enp4s0
42: 15448 0 0 0 PCI-MSI-edge nvidia
NMI: 30 9 17 10 Non-maskable interrupts
LOC: 62402 26981 17443 27463 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 30 9 17 10 Performance
monitoring interrupts
IWI: 0 0 1 0 IRQ work interrupts
RTR: 0 0 0 0 APIC ICR read retries
RES: 960 999 473 512 Rescheduling interrupts
CAL: 635 2125 552 2398 Function call interrupts
TLB: 428 530 495 475 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
THR: 0 0 0 0 Hypervisor callback
interrupts
ERR: 1
MIS: 0
$ journalctl -p 3
Sep 17 10:35:08 vdrvdpau dhcpcd[322]: if_addaddress6: Operation not supported
Sep 17 10:35:25 vdrvdpau vdr[507]: [507] ERROR: attempt to open OSD
while it is already open - using dummy OSD!
Sep 17 10:35:26 vdrvdpau vdr[507]: [507] ERROR: attempt to open OSD
while it is already open - using dummy OSD!
Sep 17 11:08:05 vdrvdpau kernel: irq 23: nobody cared (try booting
with the "irqpoll" option)
Sep 17 11:08:06 vdrvdpau kernel: handlers:
Sep 17 11:08:06 vdrvdpau kernel: [<ffffffffa002db60>] usb_hcd_irq [usbcore]
Sep 17 11:08:06 vdrvdpau kernel: Disabling IRQ #23
Sep 17 14:43:10 vdrvdpau vdr[507]: [1040] ERROR: lircd connection
broken, trying to reconnect every 3.0 seconds
Sep 17 14:43:10 vdrvdpau vdr[507]: video: fatal i/o error
-- Reboot --
Sep 17 14:43:44 vdrvdpau dhcpcd[326]: if_addaddress6: Operation not supported
Sep 17 14:43:59 vdrvdpau vdr[401]: [401] ERROR: attempt to open OSD
while it is already open - using dummy OSD!
Sep 17 14:43:59 vdrvdpau vdr[401]: [401] ERROR: attempt to open OSD
while it is already open - using dummy OSD!
Regards,
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html